Product Description
Technical Features
The high degree of modularity is a design feature of SRC helical gearboxes range. It can be connected respectively with motors such as normal motor, brake motor, explosion-proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramics packing, logistics, plastics and so on. It is possible to set up the version required using flanges or feet.
Products characteristics
SRC series helical gear units has more than 4 types. Power 0.12-4kw; Ratio 3.66-54; Torque max 120-500Nm. It can be connected (foot or flange) discretionary and use multi-mounting positions according to customers requirements.
Ground-hardened helical gears;
Modularity,can be combined in many forms;
Aluminium casing, light weight;
Gears in carbonize hard, durable;
Universal mounting;
Refined design,space effective and low noise
Structure feature
Model illuminate
|
1 |
Code for gear units series |
|
2 |
No F code means foot mounted.With F code B5 flange mounted.With Z code B14 flange mounted |
|
3 |
Specification code of gear units 01 |
|
4 |
I,II,III,B5 Output flange specification,default I not to write out is ok |
|
5 |
IEC: Input flange HS: shaft input |
|
6 |
Transmission ratio of gear units |
|
7 |
M1:Mounting position, default mounting position M1 not to write out is ok |
|
8 |
Position diagram for motor terminal box,default position o°(R) not to write out is ok |
|
9 |
No mark means without motor Model motor(poles of power) |
|
10 |
Voltage – frequency |
|
11 |
Coil in position for motor, default position S not to write out is ok |
4.2 Rotation speed n
n1 Gear units input speed
n2 Gear units output speed
If driven by the external gearing,1400r/min or lower rotation speed is suggested so as to optimize the working conditions and prolong the service life.Higher input rotation speed is permitted, but in this situation,the rated torque M2 will be reduced
4.5 Service factor fs
The effect of the driven machine on the gear unit is taken into account to a sufficient level of accuracy using the service factor fs. The service factor is determined according to the daily operation time and the starting frequency Z. Three load classifications are considered depending on the mass acceleration factor. You can read off the service factor applicable to your application in following figure. The service factor selected using this diagram must be less than or equal to the service factor as given in the performance parameter table.
* starting frequency Z: The cycles include all starting and braking procedures as well as change overs from low to high speed
SRC02..(HS) Performance parameter
|
kw |
Output speed |
Torque |
Speed ratio |
fs |
Model |
IEC |
|
0.37 |
16.7rpm |
204N.M |
54 |
1.0 |
SRC02 |
80B5/B14
|
Helical gearbox outline dimension heet
| Foot Code | U | V | V1 | V2 | V3 | W | X | X1 | Y | Z |
| B02 | 18 | 107.5 | 60 | – | 130 | 11 | 136 | 155 | 100 | 17 |
| M02 | 25 | 85 | – | 110 | 120 | 9 | 112 | 145 | 80 | 15 |
| M01 | 18 | 80 | – | 110 | 120 | 9 | 118 | 145 | 80 | 15 |
| B01 | 18 | 87 | 50 | 110 | – | 9 | 118 | 130 | 90 | 15 |
SRC helical gearbox with motor mounting position and terminal box orientation
Package
1 pc / carton,several cartons / wooden pallet /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Industry |
|---|---|
| Layout: | Cycloidal |
| Hardness: | Hardened |
| Samples: |
US$ 205/Piece
1 Piece(Min.Order) | Order Sample UD2.2
|
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can variator motors be integrated into automated systems, and how is this achieved?
Yes, variator motors can be integrated into automated systems, and their integration is achieved through various methods and technologies. Here’s an overview of how variator motors can be integrated into automated systems:
- Motor Control Interfaces: Variator motors can be equipped with motor control interfaces that allow them to communicate with automation systems. These interfaces can include analog inputs, digital inputs, and outputs, as well as communication protocols such as Modbus, Profibus, or Ethernet. By connecting the variator motor to the automation system through these interfaces, the motor can receive control signals and provide feedback, enabling seamless integration into the automated system.
- Programmable Logic Controllers (PLCs): PLCs are commonly used in automated systems to control and coordinate various components, including variator motors. The PLC can be programmed to send control signals to the variator motor based on the system’s requirements. The PLC can also receive feedback from the motor to monitor its status and adjust the control signals as needed. This integration allows for precise speed control, synchronization, and coordination of the variator motor with other system components.
- Industrial Communication Networks: In complex automated systems, variator motors can be integrated into industrial communication networks. These networks, such as Ethernet/IP, Profinet, or DeviceNet, enable communication and coordination between various devices, including variator motors, PLCs, human-machine interfaces (HMIs), and other automation components. Through these networks, control signals, data, and diagnostics can be exchanged, allowing for centralized control and monitoring of variator motors within the automated system.
- Sensor Integration: Variator motors can be integrated with various sensors to enhance the automation process. Sensors such as speed sensors, load sensors, temperature sensors, and position sensors can provide real-time data about the motor’s performance and the system’s operating conditions. This data can be used by the automation system to make informed decisions, adjust motor speed, optimize energy consumption, and ensure safe operation.
- Integration with Supervisory Control and Data Acquisition (SCADA) Systems: In larger-scale automated systems, variator motors can be integrated with SCADA systems. SCADA systems provide a comprehensive view of the entire automation process, allowing operators to monitor and control variator motors and other system components from a centralized location. SCADA systems enable real-time data visualization, historical data logging, alarm management, and remote access, enhancing the overall efficiency and reliability of the automated system.
By implementing these integration methods and technologies, variator motors can seamlessly become part of automated systems. The integration allows for precise control, monitoring, coordination, and optimization of variator motor performance, contributing to enhanced automation capabilities and improved overall system efficiency.
Are there cost considerations when choosing variator motors for industrial use?
Yes, there are several cost considerations that come into play when choosing variator motors for industrial use. Here’s a detailed explanation:
When selecting variator motors for industrial applications, it’s important to evaluate not only the initial purchase cost but also the overall cost of ownership throughout the motor’s lifespan. Here are some key cost considerations to keep in mind:
- Motor Cost: The initial purchase cost of the variator motor is an important consideration. The cost can vary depending on factors such as motor power rating, brand, quality, and additional features. It’s essential to compare prices from different suppliers and manufacturers to ensure a competitive and reasonable cost for the motor.
- Efficiency: The energy efficiency of the variator motor can have a significant impact on long-term operating costs. More efficient motors consume less energy, resulting in reduced electricity bills. It’s advisable to choose high-efficiency motors that meet or exceed the minimum efficiency standards set by regulatory bodies, such as the International Electrotechnical Commission (IEC) or the National Electrical Manufacturers Association (NEMA). Although high-efficiency motors may have a higher initial cost, the energy savings over the motor’s lifespan can offset the additional investment.
- Maintenance and Service: Consider the maintenance requirements and associated costs of variator motors. Motors that require regular maintenance, such as lubrication, bearing replacements, or brush inspections, may have higher maintenance costs compared to maintenance-free or sealed motor designs. It’s important to factor in the anticipated maintenance needs and costs when evaluating the overall cost of ownership.
- Durability and Reliability: Variator motors that are built to withstand harsh operating conditions and have a long service life can offer cost advantages in the long run. Although more durable and reliable motors may have a higher upfront cost, they can minimize the need for premature motor replacements, reduce downtime, and lower maintenance and repair expenses. It’s crucial to assess the motor’s quality, reputation, and warranty provisions to gauge its expected durability and reliability.
- Control and Automation: Variator motors often come with various control options and compatibility with automation systems. While these features can enhance operational efficiency and control, they may have associated costs. Consider the cost of control devices, such as variable frequency drives (VFDs), sensors, and monitoring equipment. Additionally, if integrating the motor into an existing automation system, ensure compatibility and account for any necessary upgrades or modifications.
- Application-Specific Requirements: Some industrial applications may have specific motor requirements that can impact costs. For example, if the motor needs to operate in extreme temperatures, hazardous environments, or corrosive atmospheres, special motor designs or materials may be necessary, which can increase costs. It’s important to evaluate any application-specific requirements and associated costs when selecting variator motors.
- Future Expandability: Consider the scalability and expandability of the motor system. If there are possibilities of future capacity expansions or modifications to the industrial process, choosing a motor that can accommodate such changes can prevent the need for a costly motor replacement in the future.
By carefully considering these cost factors, industrial users can make informed decisions when selecting variator motors that strike a balance between upfront costs and long-term operational expenses. It’s advisable to consult with motor suppliers, engineers, and industry experts to assess the specific cost considerations relevant to the industrial application and ensure the optimal motor choice.
In which industries are variator motors commonly used for different applications?
Variator motors, with their adjustable speed control capabilities, find applications in various industries where precise speed control, energy efficiency, and adaptability to changing operational requirements are essential. Here are some industries where variator motors are commonly used for different applications:
- Industrial Manufacturing: Variator motors are extensively utilized in industrial manufacturing processes. They can be found in machinery and equipment such as conveyors, mixers, extruders, and packaging machines. The ability to adjust the speed of these motors allows for efficient material handling, mixing, blending, and product packaging.
- Material Handling and Logistics: In the material handling and logistics industry, variator motors are commonly employed in conveyor systems. These motors enable precise control of product movement, allowing for smooth and efficient transfer of goods in manufacturing plants, warehouses, airports, and distribution centers.
- Pumping and Water Treatment: Variator motors are utilized in pumping systems for water treatment, wastewater management, and irrigation. The adjustable speed control feature enables the optimization of pumping rates based on demand, resulting in energy savings and improved system efficiency.
- HVAC (Heating, Ventilation, and Air Conditioning): Variator motors play a crucial role in HVAC systems, particularly in fans and blowers. By adjusting the motor speed, these systems can modulate the airflow and temperature control, ensuring optimal comfort and energy efficiency in commercial buildings, residential complexes, and industrial facilities.
- Automotive Industry: Variator motors are used in various applications within the automotive industry. They can be found in vehicle cooling systems, power steering systems, and engine control units. The ability to adjust the motor speed allows for efficient cooling, precise steering assistance, and optimal engine performance.
- Renewable Energy: Variator motors are employed in renewable energy systems such as wind turbines and solar tracking systems. In wind turbines, variator motors enable the adjustment of blade pitch for optimal power generation. In solar tracking systems, they control the movement of solar panels to maximize exposure to sunlight throughout the day.
- Food and Beverage: Variator motors find applications in the food and beverage industry, particularly in mixing, blending, and processing equipment. They enable precise control of speed and agitation, ensuring consistent product quality and efficient production processes.
These are just a few examples of industries where variator motors are commonly used. Their versatility and ability to provide adjustable speed control make them suitable for a wide range of applications across different sectors.
editor by CX 2024-05-03
China Good quality Transmission Geared Motor Unit RV Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox vacuum pump
Product Description
Worm gearbox speed reducer electric motor dc are on sale with high quality for you
SMRV 571-150 worm gear box with flange and electric motor
SMRV+NMRV Double Stage Arrangement Reduction Gear Box
RV Series Worm Gearbox
worm speed reducer
nmrv worm gear motor
You can choose the 1 type that you need form these product introction.
If you have any question,please contact me.
HangZhou CHINAMFG Machinery Co.,ltd is a company specialized in research, manufacture and service of speed gearbox. Ever since establishment, we have been persisting in technical innovation, advancing the techonology to our products while maintaining our strict quality controls. It is the reason that our products branding ”Xihu (West Lake) Dis.n” have enjoyed such successful global sales.
At present, our company mainly supplies 5 series products as RV worm gearbox, UDL series speed variator,PC series helical gear unit,G3 helical geared motor and SRC helical gearbox. The products are widely applied in the mechanical equipment field such as food and beverage,cement,package,chemical and dyeing, rubber and plastic, CNC machine tool,etc.
Our products have been processed ISO 9001 Quality System Certification and exported to Italy,Spain,Britain,Poland,Turkey.The USA and other European countries,earn the good reputation with our outstanding quality and service.
Customers first,customers satisfaction, excellent after sale service and incessant innovation are our tenet and motto. We will go all out to provide all the customers with high quality and service. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What safety considerations are associated with the installation and operation of variator motors?
When installing and operating variator motors, several safety considerations should be taken into account. Here’s a detailed explanation:
Variator motors, like any other electrical or mechanical equipment, require proper installation, operation, and maintenance to ensure safe and reliable performance. Here are some key safety considerations associated with the installation and operation of variator motors:
- Electrical Safety: Variator motors are powered by electricity, so it’s crucial to follow electrical safety guidelines during installation and operation. This includes ensuring proper grounding of the motor and adhering to local electrical codes and regulations. It’s important to have a qualified electrician handle the electrical connections and ensure that the motor is properly wired and protected from electrical hazards.
- Mechanical Safety: Variator motors often have moving parts and may be connected to mechanical systems. During installation, it’s necessary to ensure that the motor is securely mounted and aligned with the driven equipment. Adequate guarding should be provided to prevent accidental contact with moving parts, such as belts, pulleys, or couplings. Properly sized and rated couplings, belts, and other mechanical components should be used to ensure safe and reliable operation.
- Overload Protection: Variator motors should be protected against overloading. Overloading can cause overheating, reduced motor life, and potential safety hazards. It’s important to select a motor with the appropriate power rating for the application and ensure that it’s not subjected to excessive loads. Additional overload protection devices, such as thermal protectors or overload relays, may be necessary to safeguard the motor and prevent damage or hazards.
- Heat Dissipation: Variator motors can generate heat during operation, especially at higher speeds or under heavy loads. Sufficient ventilation and cooling should be provided to dissipate the heat effectively. Adequate clearance around the motor and proper ventilation in the motor enclosure or installation area can help prevent overheating and ensure safe operation. It’s important to follow the manufacturer’s recommendations regarding cooling and ventilation requirements.
- Environmental Considerations: The installation and operation of variator motors should consider the environmental conditions in which they will be used. For example, if the motor will be exposed to moisture, dust, or corrosive substances, appropriate measures should be taken to protect the motor against these elements. This may include using sealed motor enclosures or installing the motor in a suitable protective housing. Additionally, if the motor will be used in hazardous locations, such as areas with flammable gases or dust, it must comply with the applicable safety standards and requirements.
- Proper Maintenance: Regular maintenance is essential for the safe and reliable operation of variator motors. This includes periodic inspection, cleaning, and lubrication of the motor and its components. It’s important to follow the manufacturer’s maintenance guidelines and schedule to ensure that the motor remains in good working condition. Any signs of wear, damage, or abnormal operating conditions should be addressed promptly to prevent safety risks.
- Training and Awareness: Proper training and awareness of the operators and maintenance personnel are crucial for safe operation and maintenance of variator motors. Operators should be knowledgeable about the motor’s operation, control features, and emergency procedures. Maintenance personnel should be trained to perform maintenance tasks safely and be aware of potential hazards associated with the motor. Regular safety training and refresher courses can help promote a safe working environment.
It’s important to note that the specific safety considerations may vary depending on the motor model, application, and local regulations. Therefore, it’s recommended to consult the manufacturer’s documentation and guidelines, as well as relevant safety standards, to ensure that all necessary safety precautions are followed during the installation and operation of variator motors.
What resources are available for further learning about the principles and applications of variator motors?
There are several resources available for further learning about the principles and applications of variator motors. Here’s a detailed explanation:
1. Books and Publications: Numerous books and publications cover the principles, design, and applications of variator motors. Some recommended titles include “Variable Speed AC Drives with Inverter Output Filters” by Jaroslaw Guzinski and Haitham Abu-Rub, “Electric Motors and Drives: Fundamentals, Types, and Applications” by Austin Hughes and Bill Drury, and “Variable Frequency Drives: Installation and Troubleshooting” by Glen A. Mazur. These resources provide in-depth knowledge on variator motor technology, control strategies, and practical implementation.
2. Online Courses and Tutorials: Online learning platforms like Udemy, Coursera, and edX offer courses and tutorials on electric motors, motor control, and power electronics. These courses cover variator motor principles, operation, and applications, providing a structured learning experience with video lectures, quizzes, and assignments. Some courses are specifically focused on variable frequency drives (VFDs) and their applications.
3. Technical Documentation and Application Notes: Manufacturers of variator motors and associated equipment often provide technical documentation, application notes, and white papers that delve into the principles and applications of variator motors. These resources can be found on the manufacturers’ websites and offer valuable insights into motor selection, installation, and operation.
4. Professional Journals and Research Papers: Academic and professional journals in the fields of electrical engineering, power electronics, and industrial automation publish research papers and articles on variator motors. IEEE Transactions on Industrial Electronics, IEEE Industry Applications Magazine, and International Journal of Electrical Power & Energy Systems are some examples of publications that cover topics related to variator motors. Access to these resources may require subscriptions or membership in relevant professional organizations.
5. Webinars and Online Presentations: Webinars and online presentations hosted by motor manufacturers, industry associations, or technology companies can provide valuable insights into the principles and applications of variator motors. These events often feature subject matter experts who share their knowledge, discuss case studies, and answer questions from participants. Recordings of past webinars are sometimes made available for on-demand viewing.
6. Industry Forums and Discussion Groups: Online forums and discussion groups focused on electrical engineering, motor control, or industrial automation can be valuable resources for learning about variator motors. Platforms like Electrical Engineering Stack Exchange, Control.com, and LinkedIn groups dedicated to motor control offer opportunities to ask questions, engage in discussions, and learn from the experiences of industry professionals.
7. Manufacturer Training Programs: Some variator motor manufacturers offer training programs and workshops that cover the principles, operation, and applications of their products. These programs may include hands-on exercises, demonstrations, and technical support. Contacting the manufacturers directly or checking their websites can provide information on available training opportunities.
When exploring these resources, it’s important to consider the credibility of the source, relevance to specific applications, and the date of publication to ensure the information aligns with the latest advancements in variator motor technology.
By utilizing these resources, individuals can deepen their understanding of variator motors and enhance their knowledge of the principles and applications associated with this technology.
How does the efficiency of variator motors compare to other types of motors?
The efficiency of variator motors can vary depending on the specific design, application, and operating conditions. However, in general, variator motors can offer comparable or even higher efficiency compared to other types of motors. Here are some key points to consider:
- Variable Speed Operation: Variator motors excel in variable speed operations where the motor speed can be adjusted to match the load and process requirements. By running the motor at a speed that precisely meets the demand, variator motors can significantly reduce energy losses associated with running at fixed speeds. This level of control contributes to high overall system efficiency.
- Energy Savings through Speed Control: The ability to adjust the motor speed in variator motors allows for energy savings. By operating the motor at lower speeds when full speed is not required, variator motors can achieve energy efficiency gains. This is particularly relevant in applications with varying loads or processes that do not constantly require maximum speed.
- Improved Power Factor: Variator motors with adjustable speed control, such as those incorporating variable frequency drives (VFDs), can improve the power factor of the motor system. Power factor is a measure of how effectively electrical power is being used. By optimizing the motor speed and voltage, VFDs can improve the power factor, resulting in reduced reactive power consumption and improved energy efficiency.
- Motor Design and Technology: The efficiency of variator motors can also be influenced by the motor design and the use of advanced technologies. Manufacturers are continually improving motor designs, incorporating high-quality materials, precision manufacturing techniques, and efficient cooling systems to enhance motor efficiency. Additionally, advancements in motor technologies, such as the use of permanent magnet materials and improved motor control algorithms, contribute to higher overall efficiency.
- Comparison with Other Motor Types: When compared to traditional fixed-speed motors, variator motors generally offer higher efficiency due to their ability to adjust speed according to the load. In applications where variable speed control is required, variator motors can outperform fixed-speed motors in terms of energy savings, precise control, and overall system efficiency.
It’s important to note that the efficiency of variator motors can also depend on factors such as motor size, load characteristics, maintenance practices, and system design. Therefore, it’s advisable to consider specific motor specifications, consult with manufacturers, and conduct energy efficiency assessments to determine the most suitable motor type for a given application.
editor by CX 2024-04-26
china factory High Performance RV Series Right Angle Worm Gearbox manufacturers
Item Description
Solution Description
Higher Performance RV Collection Appropriate CZPT le Worm Gearbox
NMRV 571-a hundred and fifty worm CZPT with flange and electric powered motor
NMRV+NMRV Double Stage Arrangement Reduction Equipment Box
RV Sequence Worm Gearbox
worm pace reducer
nmrv CZPT motor
Comprehensive Pictures
RV Collection
Like RV / NMRV / NRV.
Main Characteristic of RV Series Worm Gearbox
RV collection CZPT reducer is a new-era merchandise developed by CZPT on the foundation of perfecting WJ series items with a compromise of CZPT d technologies the two at home and abroad.
one. CZPT -high quality aluminum alloy, light in excess weight and CZPT -rusting.
2. Large in output torque.
three. Sleek operating and reduced sounds,resilient in dreadful conditions.
four. CZPT radiation efficiency.
5. CZPT -searching visual appeal, tough in support existence and little volume.
6. Appropriate for omnibearing installation.
Main CZPT of RV Sequence Worm Gearbox
1. Housing: die-cast aluminum alloy(body dimensions: 571 to 090), solid iron(frame measurement: one hundred ten to a hundred and fifty).
two. Worm: 20Crm, carbonization quencher heat remedy helps make the surface area hardness of CZPT s up to 56-sixty two HRX, retain carbonization layer’s thickness amongst .3 and .5mm following precise grinding.
Product Parameters
3. Worm Wheel: wearable stannum bronze alloy.
| SPEED RATIO | seven.5~a hundred |
| OUTPUT TORQUE | <1050NM |
| IN POWER | .09-11KW |
| MOUNTING TYPE | FOOT-MOUNTED FLANGE-MOUNTED |
| When doing work, great load capacity, stable running, reduced sound with high efficiency. | |||||||
| Gear Box’s Usage Subject | |||||||
| one | Metallurgy | 11 | Agitator | ||||
| two | Mine | 12 | Rotary weeder | ||||
| 3 | Machine | 13 | Metallurgy | ||||
| 4 | Energy | fourteen | Compressor | ||||
| five | Transmission | 15 | Petroleum industry | ||||
| 6 | Water Conserbancy | 16 | Air CZPT | ||||
| 7 | Tomacco | seventeen | Crusher | ||||
| 8 | Health care | eighteen | Materials | ||||
| 9 | Packing | 19 | Electronics | ||||
| 10 | Chemical business | twenty | Textile indutry | ||||
| … | … | ||||||
| Power | .06kw | .09kw | .12kw | .18kw | .25kw | .37kw | .55kw |
| .75kw | 1.1kw | 1.5kw | 2.2kw | 3kw | 4kw | 5.5kw | |
| seven.5kw | 11kw | 15kw | |||||
| Torque | 2.6N.m-3000N.m | ||||||
| Ratio | 7.5-100, the double gearbox is far more | ||||||
| Colour | Blue, Silver or as CZPT ers’ need to have | ||||||
| Content | Iron or Aluminium | ||||||
| Packing | Carton with Plywood Case or as clients’ prerequisite | ||||||
| Type | RV571 | RV030 | RV040 | RV050 | RV063 | RV075 | RV090 |
| Bodyweight | .7kg | 1.3kg | two.3kg | 3.5kg | six.2kg | 9kg | 13kg |
| Variety | RV110 | RV130 | RV150 | ||||
| Bodyweight | 35kg | 60kg | 84kg | ||||
| Mounting Approaches | Foot Installation | Flange Installation | |||||
| For CZPT mortor or double input/output shafts can be outfitted | |||||||
Certifications
Packaging & CZPT
Firm Profile
Right after Income Support
FAQ
one.Q:What kinds of gearbox can you produce for us?
A:Main merchandise of CZPT organization: UDL collection speed variator,RV collection CZPT reducer, ATA collection shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, more
than one particular hundred versions and 1000’s of specs
two.Q:Can you make as for every CZPT drawing?
A: Indeed, we offer you CZPT ized services for CZPT ers.
three.Q:What is your conditions of payment ?
A: 30% CZPT payment by T/T right after signing the agreement.70% before shipping and delivery
4.Q:What is your MOQ?
A: 1 Set
Contact:
Welcome you contace me if you are intrigued in CZPT item.
Our group will assistance any want you may have.
Single-period motors have a stator. They do not have the rotating magnetic area attributes of polyphase or polyphase motors. The magnetic area developed by the stator windings is pulsating, not rotating. When the rotor is stationary, the expansion and contraction of the stator’s magnetic subject generate an electrical existing in the rotor. The recent generates the rotor magnetic area with the reverse polarity to the stator magnetic discipline. The opposite polarity applies rotational drive to the upper and reduced areas of the rotor. Because this force passes via the centre of the rotor, it continues to be equal in each and every route, trying to keep the rotor stationary. If the rotor starts to change, it proceeds to change in the direction it started, simply because the rotor’s momentum produces a rotational power in that course. Solitary-section motors are employed in reduced-electricity apps this sort of as ceiling supporters, mixer grinders, and household appliances this sort of as portable energy tools.
china price Gear Unit Right Angle RV Worm Gearbox for Transmission Device manufacturers
Item Description
Item Description
Main CZPT :
1)housing:aluminium alloy ADC12(measurement 571-090) die solid iron HT200(size one hundred ten-150)
2)Worm:20Cr, ZI Involute profile carbonize&quencher warmth treatment method make equipment surface area hardness up to fifty six-sixty two HRC Right after precision grinding, carburization layer’s thickness between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one
Thorough Photos
Mix Choices:
Input:with enter shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic protect
Worm reducers are CZPT with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Personal computer, NMRV+UDL, NMRV+MOTORS
Exploded Check out:
Product Parameters
| Aged Model |
New Model | Ratio | Center Distance | Energy | Input Dia. | Output Dia. | Output Torque | Fat |
| RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
| RV030 | RW030 | seven.5~a hundred | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | one.2kgs |
| RV040 | RW040 | seven.5~one hundred | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~a hundred | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | seven.5~a hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | seven.5~one hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | thirteen.0kgs |
| RV110 | RW110 | seven.5~100 | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~a hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | forty eight.0kgs |
| RV150 | RW150 | seven.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
GMRV Define Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | fifty four | 44 | fourteen | 55 | 32 | fifty six | sixty three | sixty five | 29 | 55 | 40 | fifty seven | thirty | 75 | forty four | 6.five | 21 | 5.5 | M6*10(n=4) | 0° | five | 16.3 | 27 |
| 040 | one hundred | 121.five | 70 | sixty | eighteen(19) | sixty | forty three | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | forty | 87 | 55 | 6.5 | 26 | 6.5 | M6*ten(n=4) | 45° | six | 20.8(21.8) | 35 |
| 050 | a hundred and twenty | 144 | 80 | 70 | twenty five(24) | 70 | forty nine | 85 | 92 | eighty five | forty three.five | eighty | 60 | 84 | fifty | a hundred | 64 | 8.5 | thirty | 7 | M8*twelve(n=4) | 45° | 8 | 28.3(27.3) | forty |
| 063 | one hundred forty four | 174 | one hundred | 85 | twenty five(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | sixty three | one hundred ten | 80 | eight.5 | 36 | eight | M8*twelve(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | ninety | 28(35) | 95 | seventy two | 112 | one hundred twenty | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | eleven | 40 | ten | M8*fourteen(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | one hundred thirty | one hundred forty | a hundred thirty | 67 | 129.five | 103 | a hundred thirty five | ninety | 160 | 102 | thirteen | forty five | eleven | M10*16(n=8) | 45° | ten | 38.3(41.3) | 70 |
| a hundred and ten | 255 | 295 | 170 | 115 | forty two | 130 | – | one hundred forty four | 155 | 165 | seventy four | one hundred sixty | 127.5 | 167.five | a hundred and ten | two hundred | one hundred twenty five | fourteen | fifty | 14 | M10*eighteen(n=8) | 45° | 12 | 45.3 | eighty five |
| 130 | 293 | 335 | two hundred | a hundred and twenty | 45 | a hundred and eighty | – | a hundred and fifty five | one hundred seventy | 215 | eighty one | 179 | 146.5 | 187.5 | a hundred thirty | 250 | 140 | sixteen | 60 | 15 | M12*20(n=8) | 45° | fourteen | 48.8 | 100 |
| 150 | 340 | 400 | 240 | a hundred forty five | 50 | one hundred eighty | – | 185 | two hundred | 215 | 96 | 210 | a hundred and seventy | 230 | one hundred fifty | 250 | a hundred and eighty | eighteen | seventy two.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Company Profile
About CZPT Transmission:
We are a professional reducer maker located in HangZhou, ZHangZhoug province.
Our leading merchandise is full range of RV571-150 worm reducers , also equipped GKM hypoid CZPT cal gearbox, GRC inline CZPT cal gearbox, Personal computer models, UDL Variators and AC CZPT s, G3 CZPT cal gear motor.
Items are commonly utilised for purposes this kind of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-generating, building machinery, metallurgic mine, environmental protection CZPT , and all varieties of automated strains, and assembly strains.
With CZPT delivery, superior right after-income support, CZPT d generating facility, CZPT goods market well both at home and overseas. We have exported CZPT reducers to CZPT Asia, CZPT ern CZPT pe and Middle CZPT and so on.Our intention is to produce and innovate on basis of substantial high quality, and produce a good popularity for reducers.
Packing info:Plastic Luggage+Cartons+Wood Circumstances , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Acquire Eurasia
Logistics
Following Revenue Services
1.Upkeep Time and Guarantee:Inside one particular year after receiving products.
2.Other Services: Which includes modeling choice guide, set up manual, and difficulty resolution guide, etc.
FAQ
one.Q:Can you make as for every CZPT er drawing?
A: Sure, we offer CZPT ized provider for CZPT ers appropriately. We can use CZPT er’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: thirty% deposit before creation,stability T/T before shipping and delivery.
3.Q:Are you a trading business or producer?
A:We are a manufacurer with CZPT d equipment and experienced staff.
four.Q:What is your creation capability?
A:8000-9000 PCS/Month
five.Q:Totally free sample is CZPT or not?
A:Sure, we can provide totally free sample if CZPT er agree to pay out for the courier value
6.Q:Do you have any certificate?
A:Indeed, we have CE certificate and SGS certification report.
Contact info:
Ms Lingel Pan
For any inquiries just come to feel free ton contact me. Many many thanks for your sort attention to CZPT organization!
Polyphase motors can be either two-period or three-phase motors. They perform like one-section induction motors, but equally one-phase and polyphase motors operate on a rotating magnetic field. Their rotating magnetic fields are produced by two- or a few-phase currents passing through two or far more sets of coils. The rotating magnetic subject generates torque. Polyphase motors are utilised in apps that need large electrical power, this sort of as the electrical power push of compressors, hydraulic pumps, air conditioning compressors, and irrigation pumps.
china Cheap RV Series Worm Gearbox manufacturers
Merchandise Description
RV sequence Qualities
- RV – Sizes:030-040-050-063-075-a hundred and five-a hundred and ten-one hundred thirty-a hundred and fifty
- Input Choices: with input shaft, With Square flange,With Input Flange
- Input CZPT .06 to 11 kW
- RV-Dimensions from 030 to 105 in die-solid aluminium alloy budy and in excess of a hundred and ten in solid iron
- Ratios among 5 and a hundred
- Max torque 1550 N.m and admissible output radial loads max 8771 N
- Aluminium models are supplied total with synthetic oil and allow for CZPT mounting positions, with no require to modify lubricant quantity
- Worm wheel: Copper (KK Cu).
- Loading capacity in accordance with: ISO 9001:2015/GB/T 19001-2016
- Dimension 030 and above are painted with RAL 5571 blue
- Worm equipment reducers are CZPT with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
- NMRV, NRV+VS,NMRV+AS,NMRV+VS,NMRV+F
- Options: torque arm, output flange, viton oil seals, reduced/substantial temperature oil, filling/drain/breather/amount plug.
Standard versions can be utilized to a extensive selection of CZPT reduction ratios from 5 to one thousand.
Warranty: One year from day of supply.
Datasheet
| Variety | Aged Sort | Output Torque | Output Shaft Dia. |
| SNW030 | RV030 | 21N.m | φ14 |
| SNW040 | RV040 | 45N.m | φ19 |
| SNW050 | RV050 | 84N.m | φ25 |
| SNW063 | RV063 | 160N.m | φ25 |
| SNW075 | RV075 | 230N.m | φ28 |
| SNW090 | RV090 | 410N.m | φ35 |
| SNW105 | RV105 | 630N.m | φ42 |
| SNW110 | RV110 | 725N.m | φ42 |
| SNW130 | RV130 | 1050N.m | φ45 |
| SNW150 | RV150 | 1550N.m | φ50 |
About CZPT glow CZPT
ZheJiang CZPT shine CZPT Co.,Ltd(Starshine) have a sturdy specialized pressure with above 350 staff at present, including more than thirty CZPT professionals, thirty good quality inspectors, covering an location of 80000 square meters and kinds of CZPT d processing machines and testing equipments. We have a very good basis for the sector application advancement and support of high-finish pace reducers & variators proudly owning to the provincial CZPT technologies study centre,the lab of equipment speed reducers, and the foundation of present day R&D.
Our products are widely utilised in ceramic business, glass business, woodworking machinery , high voltage swap, food & beverage, packaging & printing, Storage & logistics, hoisting & transportation facilities…etc , and CZPT glow technically supply the expert solution & provider for the medium and high-conclude CZPT ers, and CZPT gearboxes are very best-promoting in domestic, and even in overseas , this sort of as in CZPT pe, North CZPT ica, South CZPT ica, Middle CZPT , South Asia, CZPT Asia, Africa…etc.
In the potential , CZPT shine will keep the creed of “serving CZPT er, diligence & simplicity, self-criticism, innovation, honesty, teamwork”, and the concept of “good quality produces worth” to target on the CZPT ers’ demands and provide them the competitive transmission remedy and create benefit for them constantly, and make a large-conclude products producing industry and create a preferred brand name of replacing import merchandise and upgrading continually for the finish customers.
Staff
High quality Control
Quality:Insist on Improvement,Attempt for CZPT With the growth of gear production indurstry,consumer never satirsfy with the recent top quality of CZPT merchandise,on the contrary,wcreate the value of good quality.
Good quality coverage:to enhance the overall amount in the area of CZPT transmission
Good quality Look at:Continuous Advancement , pursuit of excellence
Quality Philosophy:Top quality produces worth
3. Incoming High quality Manage
To create the AQL satisfactory stage of incoming material manage, to supply the substance for the entire inspection, sampling, immunity. On the acceptance of competent items to warehousing, substandard products to consider return, check, rework, rework inspection dependable for tracking poor, to monitor the supplier to just take corrective actions to stop recurrence.
four. Approach Quality Control
The producing site of the first evaluation, inspection and last inspection, sampling in accordance to the requirements of some tasks, judging the good quality modify development found abnormal phenomenon of manufacturing, and supervise the creation department to increase, eradicate the irregular phenomenon or point out
five. FQC(Ultimate QC)
Soon after the manufacturing section will comprehensive the merchandise, stand in the CZPT er’s position on the concluded solution top quality verification, in get to make sure the quality of CZPT er anticipations and requirements.
6. OQC(Outgoing QC)
Right after the merchandise sample inspection to decide the experienced, permitting storage, but when the finished item from the warehouse prior to the official supply of the merchandise, there is a verify, this is named the cargo inspection.Verify content:In the warehouse storage and transfer standing to verify, even though confirming the supply of the solution is a product inspection to decide the qualified items.
Packing
Delivery
Synchronous motors run at a pace that is synchronous with the frequency of the mains existing. This indicates that in the constant-condition of the motor, the rotation of the shaft is synchronized with the frequency of the supply existing. The period of rotation of the shaft is equivalent to the number of AC cycles. The stator of a synchronous motor has polyphase AC electromagnets. These electromagnets make a magnetic field that rotates in synchrony with the existing in the wire. The rotor equipped with permanent magnets or electromagnets rotates synchronously with the stator magnetic subject to form the next synchronous rotating magnetic discipline of the AC motor.
china Custom RV Series Worm Gear Drives Reducer Motor Gearbox manufacturers
Merchandise Description
RV collection Attributes
- RV – Measurements:030-040-050-063-075-105-110-one hundred thirty-one hundred fifty
- Input Possibilities: with enter shaft, With Sq. flange,With Input Flange
- Enter CZPT .06 to 11 kW
- RV-Measurement from 030 to 105 in die-forged aluminium alloy budy and above a hundred and ten in solid iron
- Ratios among 5 and one hundred
- Max torque 1550 N.m and admissible output radial hundreds max 8771 N
- Aluminium units are supplied full with artificial oil and enable for CZPT mounting positions, with no require to modify lubricant quantity
- Worm wheel: Copper (KK Cu).
- Loading potential in accordance with: ISO 9001:2015/GB/T 19001-2016
- Measurement 030 and above are painted with RAL 5571 blue
- Worm equipment reducers are CZPT with diffferent combos: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
- NMRV, NRV+VS,NMRV+AS,NMRV+VS,NMRV+F
- Alternatives: torque arm, output flange, viton oil seals, lower/large temperature oil, filling/drain/breather/amount plug,Small gap
Fundamental designs can be applied to a wide range of CZPT reduction ratios from 5 to one thousand.
Guarantee: One year from day of shipping.
| WORM GEARBOX | |||||
| SNW SERIES | Output CZPT Assortment: | ||||
| Variety | Aged Type | Output Torque | Output Shaft Dia. | 14rpm-280rpm | |
| SNW030 | RV030 | 21N.m | φ14 | Relevant CZPT CZPT : | |
| SNW040 | RV040 | 45N.m | φ19 | .06kW-11kW | |
| SNW050 | RV050 | 84N.m | φ25 | Input Options1: | |
| SNW063 | RV063 | 160N.m | φ25 | With Inline AC CZPT | |
| SNW075 | RV075 | 230N.m | φ28 | Input Options2: | |
| SNW090 | RV090 | 410N.m | φ35 | With Sq. flange | |
| SNW105 | RV105 | 630N.m | φ42 | Enter Options3: | |
| SNW110 | RV110 | 725N.m | φ42 | With Enter Shaft | |
| SNW130 | RV130 | 1050N.m | φ45 | Enter Options4: | |
| SNW150 | RV150 | 1550N.m | φ50 | With Input Flange |
Starshine CZPT
ZheJiang CZPT shine CZPT Co.,Ltd,the predecessor was a condition-owned army mould organization, was recognized in 1965. CZPT glow specializes in the comprehensive CZPT transmission resolution for higher-end gear producing industries primarily based on the goal of “System Item, Software Style and Professional Service”.
Starshine have a strong technological power with over 350 employees at present, like more than thirty CZPT experts, thirty good quality inspectors, masking an location of 80000 sq. meters and types of CZPT d processing equipment and tests equipments. We have a excellent basis for the industry software development and provider of large-stop speed reducers & variators proudly owning to the provincial CZPT technology study middle,the lab of equipment speed reducers, and the foundation of modern R&D.
Our Staff
Quality Handle
Good quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
three. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection responsible for tracking bad, to monitor the supplier to take corrective measures
to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product
is a product inspection to determine the qualified products.
Packing
Shipping and delivery
These NEMA c-airplane reducers are equipment toughness, upkeep-free, and can be put in in any orientation with a slip match “O” ring design and style. Obtainable in low to higher reduction ratios, flange mount or foundation mount types, right angle or hollow shaft appropriate angle variations. Put in NEMA C-Experience AC motors, brushless DC motors, and brushed DC motors. For 1/2 HP to 3 HP Motors NEMA 56C, 140TC, and 180TC Enter Flange Inline Helical Gear Reducers Right Angle Hypoid Equipment Reducers
china shop Industrial Transmission Drive RV Series Nmrv Reduction Gear Box Stainless Steel Worm Gearbox Speed Reducer manufacturers
Solution Description
Industrial Transmission CZPT Rv Series nmrv Reduction Equipment Box CZPT Metal Worm Gearbox CZPT Reducer
Goods Attributes
one. Produced of high-high quality aluminum alloy,mild bodyweight and CZPT -rusting
2. Massive output torque
three. Sleek in working and low in sound,can work CZPT time in dreadful circumstances.
four. CZPT in radiating efficiency.
five. CZPT -hunting in visual appeal,durable in service lifestyle and tiny in volume.
6. Suited for omnibearing installation.
Attributes of Worm Reducer /Gearbox
1.Widespread mounting dimensions.
two.Aluminum and solid iron housing.
three.Worm and worm wheel transmission.
four.Compact framework and light-bodyweight.
5.Wide variety of accessories.
Advantages of Worm Gearbox / Reducer
1.Exclusive housing layout will distinguish you from other rivals.
2.Numerous option for oil seal.
three.The proportions can be CZPT ized according to CZPT er’s demands.
|
Product No |
NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 |
|
Ratio |
5,7.5,ten,fifteen,twenty,25,thirty,forty,fifty,60,80,a hundred |
|
Substance |
Housing: Dimensions twenty five-a hundred and ten Is CZPT Alloy, Dimension 110-one hundred fifty Is Cast-Iron |
|
Worm Wheel: ZCuSn10Pb1 |
|
|
Worm:20Cr |
|
|
Pinion:Tin Bronze |
|
|
Output Shaft: Metal-45# |
|
|
Variety |
Worm Gear CZPT Reducer / Gearbox / Reductor |
|
Coloration |
Personalized Color |
|
Packing |
Carton, Honey Comb Carton, CZPT Situation with CZPT Pallet |
|
Utilization |
Industrial CZPT , Foodstuff Stuff, Ceramics, CZPT , Packing, Dyeing, Wood Operating, CZPT , and so on. |
|
Flange |
IEC normal flange or CZPT ized dimensions |
|
Housing Material |
Aluminum&Forged iron |
|
Size |
eleven measurements(WMRV25~WMRV185) |
|
Electrical power |
.06~22 KW |
|
Nominal torque |
≤2548 N.m |
|
Ratio |
5~a hundred |
Associated Products
Firm Details
Polyphase motors can be both two-stage or 3-stage motors. They perform like one-phase induction motors, but equally single-section and polyphase motors run on a rotating magnetic field. Their rotating magnetic fields are generated by two- or 3-stage currents passing through two or more sets of coils. The rotating magnetic field creates torque. Polyphase motors are utilised in purposes that require high electrical power, this sort of as the power travel of compressors, hydraulic pumps, air conditioning compressors, and irrigation pumps.
china near me High Efficiency RV Worm Gearbox with Output Hollow Shaft manufacturers
Merchandise Description
Item Description
Principal Characteristics:
1) Created of high good quality aluminum alloy, mild bodyweight and CZPT -rusting
two) Huge output torque and large radiating performance
3) Easy managing and reduced sounds, can operate CZPT time in dreadful issue
4) CZPT -hunting look, durable support daily life and little quantity
5) Suited for omnibearing installation
Main CZPT :
1)housing:aluminium alloy ADC12(dimension 571-090) die cast iron HT200(measurement one hundred ten-150)
two)Worm:20Cr, ZI Involute profile carbonize&quencher warmth treatment make gear area hardness up to 56-62 HRC Following precision grinding, carburization layer’s thickness amongst .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-one
Blend Alternatives:
Enter:with input shaft, With square flange,With IEC regular input flange
Output:with torque arm, output flange, one output shaft, double output shaft, plastic cover
Worm reducers are CZPT with diffferent combos: NMRV+NMRV, NMRV+NRV, NMRV+Pc, NMRV+UDL, NMRV+MOTORS
Comprehensive Pictures
Merchandise Parameters
| Old Model | New Model | Ratio | Center Distance | Electrical power | Input Dia. | Output Dia. | Output Torque | Excess weight |
| RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
| RV030 | RW030 | seven.5~100 | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | one.2kgs |
| RV040 | RW040 | 7.5~a hundred | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | two.3kgs |
| RV050 | RW050 | 7.5~one hundred | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | seven.5~100 | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | six.2kgs |
| RV075 | RW075 | 7.5~one hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | nine.0kgs |
| RV090 | RW090 | seven.5~one hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | thirteen.0kgs |
| RV110 | RW110 | seven.5~one hundred | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~one hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~one hundred | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
Exploded See:
GMRV Define Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | eighty | ninety seven | fifty four | 44 | 14 | fifty five | 32 | 56 | 63 | sixty five | 29 | fifty five | 40 | fifty seven | 30 | 75 | forty four | six.5 | 21 | five.five | M6*ten(n=4) | 0° | 5 | sixteen.three | 27 |
| 040 | 100 | 121.5 | 70 | 60 | eighteen(19) | sixty | 43 | 71 | seventy eight | 75 | 36.five | 70 | 50 | 71.5 | 40 | 87 | fifty five | six.5 | 26 | six.five | M6*ten(n=4) | 45° | six | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | ninety two | 85 | 43.5 | eighty | 60 | 84 | 50 | a hundred | 64 | 8.five | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | a hundred and forty four | 174 | one hundred | eighty five | twenty five(28) | eighty | 67 | 103 | 112 | 95 | 53 | ninety five | seventy two | 102 | 63 | a hundred and ten | eighty | eight.5 | 36 | eight | M8*twelve(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | one hundred twenty | 90 | 28(35) | 95 | seventy two | 112 | a hundred and twenty | one hundred fifteen | fifty seven | 112.5 | 86 | 119 | 75 | a hundred and forty | ninety three | eleven | forty | ten | M8*fourteen(n=8) | 45° | 8(ten) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | a hundred and forty | one hundred | 35(38) | a hundred and ten | 74 | one hundred thirty | one hundred forty | one hundred thirty | 67 | 129.five | 103 | one hundred thirty five | ninety | a hundred and sixty | 102 | 13 | forty five | eleven | M10*sixteen(n=8) | 45° | ten | 38.3(41.3) | 70 |
| one hundred ten | 255 | 295 | one hundred seventy | 115 | forty two | 130 | – | 144 | 155 | a hundred sixty five | 74 | one hundred sixty | 127.five | 167.five | one hundred ten | two hundred | one hundred twenty five | 14 | 50 | fourteen | M10*eighteen(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | two hundred | 120 | 45 | 180 | – | one hundred fifty five | 170 | 215 | 81 | 179 | 146.five | 187.five | 130 | 250 | 140 | 16 | sixty | 15 | M12*twenty(n=8) | 45° | 14 | forty eight.8 | 100 |
| a hundred and fifty | 340 | 400 | 240 | a hundred forty five | 50 | one hundred eighty | – | 185 | two hundred | 215 | ninety six | 210 | a hundred and seventy | 230 | one hundred fifty | 250 | one hundred eighty | eighteen | 72.5 | 18 | M12*22(n=8) | 45° | fourteen | 53.eight | 120 |
Company Profile
About CZPT Transmission:
We are a professional reducer producer positioned in HangZhou, ZHangZhoug province.
Our foremost items is full selection of RV571-a hundred and fifty worm reducers , also equipped GKM hypoid CZPT cal gearbox, GRC inline CZPT cal gearbox, Laptop units, UDL Variators and AC CZPT s, G3 CZPT cal gear motor.
Items are widely utilised for applications this kind of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-creating, construction machinery, metallurgic mine, environmental safety CZPT , and all types of automated traces, and assembly strains.
With CZPT supply, excellent soon after-revenue provider, CZPT d making facility, CZPT products sell well both at house and overseas. We have exported CZPT reducers to CZPT Asia, CZPT ern CZPT pe and the Middle CZPT and so on.Our aim is to create and innovate on the foundation of large high quality, and develop a good status for reducers.
Workshop:
Exhibitions:
We take part Germany Hannver Exhibition-ZheJiang PTC Reasonable-Turkey Earn Eurasia
Packaging & CZPT
Packing information:Plastic Luggage+Cartons+Wood Instances , or on request
Set up Recommendations
To install the reducer, it is essential to notice the subsequent problems:
1)Examine the right rotation path of output shaft ahead of fitting reducer to machines.
two)Before mounting, pls check shaft diameter, bore diameter, important and keyway, to be certain their dimension are not deviation In buy to hold good overall performance, also pls avoid assembling as well restricted or way too loose.
three)Reducer have to be mounted to equipment stably to keep away from vibration.
4)Whenever attainable,safeguard the reducer from photo voltaic radiation and bad weather.
5)In the scenario of notably lengthy interval of storage(4-6 months), if the oil seal is not immersed in lubricant inside the unit, it is advised to adjust it given that the rubber could adhere to the shaft or may possibly even have missing the elasticity.
6)Painting should absolutely not go above rubber parts and the holes on breather plug if any.
seven)When join with hollow or sound shaft, pls grease the joint to keep away from lock or oxidation.
eight)Check the appropriate lubricant level via indicator if there is one.
nine)Starting up should just take location steadily, without having instantly applying the greatest load.
ten)When utilizing CZPT of motors to match reducer directly, supporting device is necessary if motor is way too heavy.
eleven)Make sure good heat dissipation by retaining excellent air flow in close proximity to the motor fan.
12)In the circumstance of ambient temperature40ºC, pls get in touch with the specialized division.
After Sales Services
one.Routine maintenance Time and Guarantee:Inside of 1 yr following getting items.
2.Other Support: Including modeling variety guide, installation guide, and dilemma resolution guide, etc.
FAQ
1.Q:Can you make as for each CZPT er drawing?
A: Indeed, we offer you CZPT ized services for CZPT ers appropriately. We can use CZPT er’s nameplate for gearboxes.
two.Q:What is your terms of payment ?
A: thirty% deposit ahead of creation,balance T/T prior to shipping.
3.Q:Are you a trading company or maker?
A:We are a manufacurer with CZPT d tools and seasoned employees.
four.Q:What is your manufacturing potential?
A:8000-9000 PCS/Month
5.Q:Totally free sample is CZPT or not?
A:Of course, we can provide totally free sample if CZPT er concur to pay for the courier expense
6.Q:Do you have any certificate?
A:Sure, we have CE certification and SGS certificate report.
Make contact with details:
Ms Lingel Pan
For any inquiries just really feel free of charge ton make contact with me. Several many thanks for your kind attention to CZPT firm!
An AC motor is a frequent type of electric motor that is driven by alternating current. As the most efficient sensible motors for every day industrial programs (as well as hobbyist initiatives, family objects, and all other expert equipment and client goods), AC motors supply a comparatively efficient strategy of producing mechanical strength from a easy electrical enter sign.
china Cost Km0502 Series Helical-Hypoid Gearbox Replacement of RV manufacturers
Item Description
Km0502 Series CZPT cal-Hypoid Gearbox CZPT of RV
1.KM sequence CZPT cal-hypoid Gearbox’s Traits
KM series CZPT cal-hypoid gearbox is a new-technology of item developed by CZPT . With a compromise of CZPT d technologies equally at home and abroad, its primary characteristics are as follows:
(1) CZPT n by hypoid gears, which has massive ratios.
(2) Big output torque, high effectiveness, vitality saving and environmental defense.
(3) CZPT -quality aluminum alloy housing, and mild in excess weight and CZPT -rusting.
(4) Easy in running and reduced in sound, and can work CZPT time in dreadful conditions.
(5) CZPT -searching in visual appeal, resilient in provider daily life and modest in volume.
(6) Ideal for all spherical installation, vast application and simple use.
(7) The mounting dimension of KM collection CZPT cal-hypoid gearbox are appropriate with RV sequence CZPT box.
(8) Modular and multi-composition can satisfy the calls for of CZPT situations.
two. KM sequence CZPT cal-hypoid Gearbox’s Main CZPT
(1) Housing: die-solid aluminum alloy (frame dimension 27 to fifty seven)
(2) Gear wheel: 20CrMnTiH1 carbonizing & quenching heat therapy make the hardness of gears surface area be up to fifty six-62 HRC, and be retained carburization layers thickness among .3 and .5mm soon after exact grinding.
three. KM sequence CZPT cal-hypoid Gearbox’s Surface area Painting
Aluminum alloy housing:
(1) Shot blasting and special antiseptic treatment method on the aluminum alloy surface area.
(2) After phosphating, spray the RAL9571 silver white paint.
4.HangZhou CZPT CZPT ry Co.,Ltd
a.Our merchandise
| Shaft Mounted Gearbox | ATA Sequence Shaft Mounted Gearbox |
| ZJY Series Shaft Mounted Gearbox | |
| Standard Gearbox | R Collection CZPT cal Gear Units |
| K Collection CZPT cal-bevel Gear Units | |
| F Series Parallel Shaft CZPT cal Equipment Models | |
| S Series CZPT cal Worm Gearbox | |
| Worm Gearbox | RV Series Worm Gearbox(Units) |
| Planetary Gearbox | Planetary Gear Models |
| Star Wheel CZPT Equipment Models | |
| NGW Series Planetary Gearbox | |
| Motor | AC CZPT (With Brake) |
| MB Series Various CZPT CZPT r | |
| Others | Gearbox for Special Use |
b.Our Providers
| Pre-sale services | 1. Decide on tools design. |
| two.Design and style and manufacture goods in accordance to clients’ unique need. | |
| three.Prepare specialized personalized for customers | |
| Services in the course of offering | one.Pre-examine and accept products ahead of supply. |
| 2. Support consumers to draft fixing programs. | |
| After-sale providers | 1.Support customers to get ready for the very first development plan. |
| two. Prepare the very first-line operators. | |
| 3.Just take initiative to remove the problems quickly. | |
| 4. Supply specialized exchanging. |
Solution images:
Our business :
AOKMAN® was launched in 1982, which has much more than 36 many years in R & D and production of gearboxes, gears, shaft, motor and spare parts.
We can offer you the correct solution for uncountable programs. Our goods are widely used in the ranges of metallurgical, metal, mining, pulp and paper, sugar and alcoholic beverages market place and CZPT other types of machines with a strong existence in the worldwide industry.
AOKMAN® has become a reputable provider, ready to offer large quality gearboxes.With 36 years experience, we assure you the utmost trustworthiness and security for both product and services.
Buyer checking out:
FAQ:
one.Q:What sorts of gearbox can you make for us?
A:Principal merchandise of CZPT organization: UDL sequence pace variator,RV collection CZPT reducer, ATA series shaft mounted gearbox, X,B sequence equipment reducer,
P collection planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, much more
than one hundred models and 1000’s of specifications
2.Q:Can you make as for each CZPT drawing?
A: Indeed, we provide CZPT ized service for CZPT ers.
three.Q:What is your conditions of payment ?
A: 30% CZPT payment by T/T right after signing the agreement.70% prior to shipping
four.Q:What is your MOQ?
A: 1 Set
If you have any need for CZPT products you should feel free of charge to get in touch with me.
DC motors use energy from batteries or other creating resources that offer a constant voltage. A DC motor is composed of numerous components, the most renowned of which incorporate bearings, shafts, and gearboxes or gears. DC motors provide much better pace variation and control and generate a lot more torque than AC motors. The two kinds of DC motors include Brushed motors: Brushed motors are one particular of the oldest varieties and are internally commutated motors pushed by DC current. A brushed motor consists of a rotor, brushes, and a shaft. The cost and polarity of the brushes control the route and speed of the motor. Brushless Motors: In recent several years, brushless motors have grow to be well-liked for several programs, largely due to the fact of their performance. Brushless motors are built in the very same way as brushed motors, minus the brushes of training course. Brushless motors also consist of devoted circuitry to manage speed and route. In brushless motors, magnets are mounted around the rotor, an effectiveness-boosting configuration.
china price Right Angle Power Transmission Helical Gearbox Like Bonfiglioli W and Motovario RV manufacturers
Merchandise Description
Item Description
KPM-KPB series helical-hypoid gearboxes are the new-technology product with a compromise of CZPT d technologies each at house and abroad.This merchandise is extensively employed in textile, foodstuff, beverage,tobacco, logistics industrial fields,and so forth.
Main Attributes:
(1) CZPT n by hypoid gears, which has huge ratios.
(2) Big output torque, large efficiency(up to ninety two%), vitality saving and environmental security.
(3) CZPT quality aluminum alloy housing, light in bodyweight and CZPT -rusting.
(4) Smooth in working and reduced in sounds, and can operate CZPT time in dreadful problems.
(5) CZPT -searching appearance, durable service life and little volume.
(6) Suited for all spherical installation, broad software and easy use.
(7) KPM series can change NMRV CZPT box KPB sequence can exchange CZPT W sequence CZPT box
(8) Modular and multi-construction can meet up with the requires of CZPT problems.
Main Substance:
(1) Housing: aluminum alloy
(2) Gear wheel: 20CrMnTiH1,carbonize & quencher heat remedy make the hardness of gears surface up to 56-sixty two HRC, retain carburization layers thickness among .3 and .5mm soon after specific grinding.
Comprehensive Pictures
Item Parameters
Design Data:
| GEARBOX Deciding on TABLES | ||||||||||||
| KPM50.. | n1=1400r/min | 160Nm | ||||||||||
| Model | i | i | n2 | M2max | Fr2 | 63B5 | 71B5/B14 | 80B5/B14 | 90B5/B14 | |||
| nominal | real | [r/min] | [Nm] | [N] | ||||||||
| three Stage | ||||||||||||
| KPM50C | 300 | 294.05 | 4.8 | 130 | 4100 | N/A | N/A | N/A | ||||
| KPM50C | 250 | 244.29 | five.8 | 130 | 4100 | N/A | N/A | N/A | ||||
| KPM50C | two hundred | two hundred.44 | seven.0 | 130 | 4100 | N/A | N/A | N/A | ||||
| KPM50C | 150 | 146.67 | nine.6 | 160 | 4000 | N/A | N/A | N/A | ||||
| KPM50C | one hundred twenty five | 120.34 | twelve | 160 | 3770 | N/A | N/A | |||||
| KPM50C | a hundred | one hundred and one.04 | 14 | 160 | 3560 | N/A | N/A | |||||
| KPM50C | 75 | 74.sixty two | 19 | 160 | 3220 | N/A | N/A | |||||
| KPM50C | sixty | 62.36 | 23 | 160 | 3030 | N/A | N/A | |||||
| KPM50C | fifty | fifty two.36 | 27 | 160 | 2860 | N/A | N/A | |||||
| 2 Phase | ||||||||||||
| KPM50B | sixty | fifty eight.36 | 24 | 130 | 2960 | N/A | N/A | |||||
| KPM50B | fifty | 48.86 | 29 | 130 | 2790 | N/A | ||||||
| KPM50B | 40 | 40.09 | 35 | 130 | 2610 | N/A | ||||||
| KPM50B | 30 | 29.33 | 48 | 160 | 2350 | N/A | ||||||
| KPM50B | twenty five | 24.07 | 59 | 160 | 2200 | |||||||
| KPM50B | twenty | twenty.21 | 70 | 160 | 2080 | |||||||
| KPM50B | 15 | fourteen.ninety two | 94 | 160 | 1880 | |||||||
| KPM50B | 12.five | twelve.47 | 113 | 160 | 1770 | |||||||
| KPM50B | 10 | 10.forty seven | 134 | 160 | 1670 | |||||||
| KPM50B | seven.5 | seven.73 | 182 | 160 | 1510 | |||||||
| KPM63..,KPB63.. | n1=1400r/min | 180Nm | ||||||||||
| Model | i | i | n2 | M2max | Fr2 | 63B5 | 71B5/B14 | 80B5/B14 | 90B5/B14 | |||
| nominal | genuine | [r/min] | [Nm] | [N] | ||||||||
| three Stage | ||||||||||||
| KPM63C | KPB63C | three hundred | 302.50 | 4.7 | 160 | 4800 | N/A | N/A | N/A | |||
| KPM63C | KPB63C | 250 | 243.57 | five.eight | 160 | 4800 | N/A | N/A | N/A | |||
| KPM63C | KPB63C | two hundred | 196.43 | 7.2 | 160 | 4800 | N/A | N/A | ||||
| KPM63C | KPB63C | one hundred fifty | 151.56 | 9.3 | 180 | 4650 | N/A | N/A | ||||
| KPM63C | KPB63C | one hundred twenty five | 122.22 | twelve | 180 | 4330 | N/A | N/A | ||||
| KPM63C | KPB63C | a hundred | ninety four.50 | fourteen | 180 | 4070 | N/A | N/A | ||||
| KPM63C | KPB63C | 75 | seventy three.33 | 20 | 180 | 3650 | N/A | |||||
| KPM63C | KPB63C | 60 | sixty three.33 | 23 | 180 | 3480 | N/A | |||||
| KPM63C | KPB63C | 50 | fifty two.48 | 27 | 180 | 3270 | N/A | |||||
| 2 Stage | ||||||||||||
| KPM63B | KPB63B | 60 | 60.50 | 24 | 160 | 3430 | N/A | |||||
| KPM63B | KPB63B | fifty | 48.71 | 29 | 160 | 3190 | ||||||
| KPM63B | KPB63B | forty | 39.29 | 36 | 160 | 2970 | ||||||
| KPM63B | KPB63B | 30 | thirty.31 | forty seven | 180 | 2720 | ||||||
| KPM63B | KPB63B | twenty five | 24.44 | 58 | 180 | 2530 | N/A | |||||
| KPM63B | KPB63B | 20 | 18.90 | 70 | 180 | 2380 | N/A | |||||
| KPM63B | KPB63B | 15 | 14.67 | 96 | 180 | 2130 | N/A | N/A | ||||
| KPM63B | KPB63B | twelve.5 | twelve.67 | 111 | 180 | 2030 | N/A | N/A | ||||
| KPM63B | KPB63B | 10 | ten.50 | 134 | 180 | 1910 | N/A | N/A | ||||
| KPM63B | KPB63B | seven.five | seven.60 | 185 | 180 | 1710 | N/A | N/A | ||||
| KPM75..,KPB75.. | n1=1400r/min | 350Nm | ||||||||||
| Model | i | i | n2 | M2max | Fr2 | 63B5 | 71B5 | 80B5/B14 | 90B5/B14 | 100B5/B14 | 112B5/B14 | |
| nominal | true | [r/min] | [Nm] | [N] | ||||||||
| three Phase | ||||||||||||
| KPM75C | KPB75C | 300 | 297.21 | four.eight | 300 | 6500 | N/A | N/A | N/A | N/A | ||
| KPM75C | KPB75C | 250 | 240.89 | five.nine | 300 | 6500 | N/A | N/A | N/A | N/A | ||
| KPM75C | KPB75C | two hundred | 200.66 | seven.0 | 300 | 6500 | N/A | N/A | N/A | N/A | ||
| KPM75C | KPB75C | 150 | 149.30 | 9.3 | 350 | 6500 | N/A | N/A | N/A | |||
| KPM75C | KPB75C | one hundred twenty five | 121.00 | twelve | 350 | 5980 | N/A | N/A | N/A | |||
| KPM75C | KPB75C | 100 | 100.80 | 15 | 350 | 5520 | N/A | N/A | N/A | |||
| KPM75C | KPB75C | seventy five | 79.40 | 19 | 350 | 5040 | N/A | N/A | ||||
| KPM75C | KPB75C | 60 | sixty two.43 | 23 | 350 | 4730 | N/A | N/A | N/A | |||
| KPM75C | KPB75C | fifty | 49.18 | 29 | 350 | 4370 | N/A | N/A | N/A | |||
| two Phase | ||||||||||||
| KPM75B | KPB75B | 60 | fifty nine.44 | 24 | 300 | 4660 | N/A | N/A | N/A | |||
| KPM75B | KPB75B | 50 | forty eight.18 | 30 | 300 | 4340 | N/A | N/A | N/A | |||
| KPM75B | KPB75B | forty | forty.13 | 35 | 300 | 4080 | N/A | N/A | ||||
| KPM75B | KPB75B | 30 | 29.86 | 47 | 350 | 3720 | N/A | N/A | N/A | |||
| KPM75B | KPB75B | twenty five | 24.20 | fifty six | 350 | 3500 | N/A | N/A | ||||
| KPM75B | KPB75B | 20 | twenty.16 | seventy one | 350 | 3230 | N/A | N/A | ||||
| KPM75B | KPB75B | fifteen | 15.88 | ninety three | 350 | 2950 | N/A | N/A | ||||
| KPM75B | KPB75B | 12.5 | 12.49 | 113 | 350 | 2770 | N/A | N/A | N/A | |||
| KPM75B | KPB75B | ten | nine.84 | 143 | 350 | 2550 | N/A | N/A | N/A | |||
| KPM75B | KPB75B | seven.5 | seven.48 | 188 | 350 | 2330 | N/A | N/A | N/A | |||
| KPM90..,KPB86.. | n1=1400r/min | 500Nm | ||||||||||
| Model | i | i | n2 | M2max | Fr2 | 63B5 | 71B5 | 80B5/B14 | 90B5/B14 | 100B5/B14 | 112B5/B14 | |
| nominal | genuine | [r/min] | [Nm] | [N] | ||||||||
| 3 Phase | ||||||||||||
| KPM90C | KPB86C | three hundred | 297.21 | 4.8 | 450 | 6500 | N/A | N/A | N/A | N/A | ||
| KPM90C | KPB86C | 250 | 240.89 | five.9 | 450 | 6500 | N/A | N/A | N/A | |||
| KPM90C | KPB86C | two hundred | 200.66 | seven.0 | 450 | 6500 | N/A | N/A | N/A | |||
| KPM90C | KPB86C | 150 | 151.20 | nine.3 | 500 | 6500 | N/A | N/A | N/A | |||
| KPM90C | KPB86C | 125 | one hundred twenty five.95 | 12 | 500 | 5980 | N/A | N/A | N/A | |||
| KPM90C | KPB86C | 100 | ninety nine.22 | 15 | 500 | 5520 | N/A | N/A | N/A | |||
| KPM90C | KPB86C | 75 | seventy five.45 | 19 | 500 | 5040 | N/A | N/A | N/A | |||
| KPM90C | KPB86C | 60 | sixty two.43 | 23 | 500 | 4730 | N/A | N/A | N/A | |||
| KPM90C | KPB86C | 50 | forty nine.18 | 29 | 500 | 4370 | N/A | N/A | N/A | |||
| 2 Stage | ||||||||||||
| KPM90B | KPB86B | sixty | 59.44 | 24 | 450 | 5890 | N/A | N/A | ||||
| KPM90B | KPB86B | fifty | forty eight.18 | thirty | 450 | 5500 | N/A | N/A | ||||
| KPM90B | KPB86B | forty | forty.13 | 35 | 450 | 5170 | N/A | N/A | ||||
| KPM90B | KPB86B | 30 | thirty.24 | forty seven | 500 | 4710 | N/A | N/A | ||||
| KPM90B | KPB86B | twenty five | twenty five.19 | fifty six | 500 | 4430 | N/A | N/A | ||||
| KPM90B | KPB86B | twenty | 19.84 | seventy one | 500 | 4090 | N/A | N/A | N/A | |||
| KPM90B | KPB86B | 15 | 15.09 | 93 | 500 | 3730 | N/A | N/A | N/A | |||
| KPM90B | KPB86B | twelve.5 | 12.49 | 113 | 500 | 3510 | N/A | N/A | N/A | |||
| KPM90B | KPB86B | 10 | nine.84 | 143 | 500 | 3240 | N/A | N/A | N/A | |||
| KPM90B | KPB86B | seven.5 | seven.48 | 188 | 500 | 2950 | N/A | N/A | N/A | |||
Define Dimension:
Organization Profile
About CZPT firm:
We are a professional reducer producer situated in HangZhou, ZHangZhoug province.Our foremost items is full range of RV571-150 worm reducers , also provided hypoid CZPT cal gearbox, Pc models, UDL Variators and AC CZPT s.Items are broadly employed for apps these kinds of as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental security CZPT , and all types of automated traces, and assembly strains.With CZPT supply, excellent after-sales service, CZPT d making facility, CZPT items sell well both at home and overseas. We have exported CZPT reducers to CZPT Asia, CZPT ern CZPT pe and Center CZPT and so on.Our purpose is to create and innovate on foundation of large quality, and generate a good track record for reducers.
Packing details:Plastic Bags+Cartons+Wooden Cases , or on ask for
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Earn Eurasia
Logistics
Soon after Revenue Service
1.Upkeep Time and Guarantee:In a single year after acquiring merchandise.
two.Other Support: Like modeling selection guide, installation manual, and problem resolution guide, etc.
FAQ
one.Q:Can you make as for every CZPT er drawing?
A: Sure, we offer you CZPT ized service for CZPT ers accordingly. We can use CZPT er’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit prior to generation,balance T/T prior to shipping.
3.Q:Are you a trading firm or company?
A:We are a manufacurer with CZPT d tools and knowledgeable employees.
4.Q:What is actually your creation ability?
A:8000-9000 PCS/Month
5.Q:Free sample is CZPT or not?
A:Indeed, we can offer totally free sample if CZPT er agree to pay for the courier expense
six.Q:Do you have any certificate?
A:Of course, we have CE certification and SGS certification report.
Make contact with details:
Ms Lingel Pan
For any inquiries just really feel totally free ton get in touch with me. Several many thanks for your sort interest to CZPT business!
Synchronous motors run at a velocity that is synchronous with the frequency of the mains current. This implies that in the steady-state of the motor, the rotation of the shaft is synchronized with the frequency of the supply existing. The time period of rotation of the shaft is equal to the variety of AC cycles. The stator of a synchronous motor has polyphase AC electromagnets. These electromagnets generate a magnetic field that rotates in synchrony with the present in the wire. The rotor geared up with everlasting magnets or electromagnets rotates synchronously with the stator magnetic discipline to form the 2nd synchronous rotating magnetic discipline of the AC motor.