Insulator Ceramic Plate Aluminium Nitride Ceramic
Solution Description
The aluminum nitride (AlN) ceramic has high thermal conductivity(5-ten times as the alumina ceramic), minimal dielectric continuous and dissipation element, very good insulation and exceptional mechanical houses, non-toxic, large thermal resistance, chemical resistance ,and the linear expansion coefficient is similar with Si,which is broadly utilized in communication parts, large electricity led, electrical power digital devices and other fields.Special spec goods can be produced on requests.
Specifications:
1.Higher thermal conductivity
2.Large flexural energy, higher temperature
2.Great electrical insulation
Product Overall performance:
High thermal conductivity, higher flexural toughness, high temperature
Great electrical insulation
Lower dielectric continuous and loss
Material Homes:
| Substance Qualities of Aluminum Nitride Substrate/Wafer | |
| Property Material | Property Index |
| Density(g/cm3) | 3.335 |
| Resistance to Thermal Shock | No Cracks |
| Thermal conductivity(30°C, W/m.k) | ≥170 |
| CZPT expansion coefficient (/°C, 5°C/min, twenty-300°C) |
two.805×10-6 |
| Flexural power (MPa) | 382.7 |
| Quantity Resistivity (Ω.cm) | one.4×1014 |
| Dielectric continual(1MHz) | eight.56 |
| Chemical Longevity (mg/cm2) | .ninety seven |
| Dielectric power (KV/mm) | eighteen.45 |
| Floor roughness Ra(μm) | .3~.5 |
| Camber (length‰) | ≤2‰ |
| Visual appeal/ Shade | Dense/ Dim Gray |
Notice: The common attributes of the components described over ended up derived from laboratory test done by Innovacera from time on sample portions. Actual qualities of generation heaps may vary.
Programs:
RF/Microwave Parts
Electricity Modulus
Electrical power Transformers
High Power LED deal
CZPT Diode Sub-mounts
LED Chip Sub-mount
Microelectronic Deals
Transistors
CZPT processing services:
Through laser equipment scribing, chopping, and drilling, we can process AlN substrate with substantial accuracy and complete regularity upon customers’request.
Polishing processing services:
Our AlN substrate can be polished(solitary and double polish) by the sophisticated device which imported from overseas. Ceramic substrate surface roughness can reach to .03-.05um CZPT porous following getting polished. It is completely ideal for the unit application of little spec, higher precision , wiring density and very good balance.
As a skilled company in innovative ceramic industries, HIGHBORN is supplying higher good quality and high precision ceramic components for consumers from CZPT. Our ceramic products are widely utilized in numerous fields of automotive, metallurgy, machinery, digital & electrical, food, chemical, healthcare and so on. With skilled engineers and gifted personnel, we are able to consider assignments and drawings correctly, make useful recommendation, offer enjoyable products. Our supplies like:
– Aluminium Oxide ( 95% 96% 99% 99.five% 99.seven% Al2O3 )
– Zirconium Oxide ( Yttria stabilized ZrO2 )
– Silicon Nitride ( Gasoline force sintered & Scorching pressed Si3N4 )
– Silicon Carbide (Reactive sintered, Pressureless sintered & Recrystallization SiC)
– Aluminum Nitride
– Machinable Glass Ceramic
Xihu (West Lake) Dis.g at creating long term cooperation partnership with our customers, we established our motto as “Top quality 1st”. Much now, our merchandise have been exported to North Amirica, East CZPTpe, West CZPTpe, East Asia, Southeast Asia and get good status from our client.
Firm introduction:
HangCZPT CZPT Jia Rifeng Tai Digital Technological innovation Co., Ltd. Was started in 2571, a total investment of far more than a million RMB. Jia RiFeng Tai is a professional dedicated to the domestic and overseas electronic thermal insulation resources of large-tech enterprises.
Our Main Items: Thermal conductive filler content, like thermal hole pad, insulator silicone sheet, insulator silicone sleeve, ACF conductive film, thermal silicone heating, thermal double-sided tape, thermal graphite, thermal silicone encapsulants, thermal grease / paste, alumina ceramic, Aln ceramic, zirconia ceramic, Sic ceramic, NFC Ferrite sheet, EMI absorber sheet, thermal section change materials, silicone rubber (CZPTpoly), Bergquist thermal conductive material K4, K6, K10 insulation gap pad.
Exhibition :
Make contact with us
We can make a lot of technical specs according to your request !
For a lot more data , please really feel cost-free to make contact with to me.
