PP PE PET PVC Stomach muscles recycle pelletizing device/granulation device/PET granulator/PET pelletizer. The device with High-torque twin-screw extruding screw device, this  is a new-era higher-speed, large-torque and large-electricity twin screw extruder realizing technological marketing dependent on the current product by drawing experience from the superior manufacturing technology in China.

 

The rewards of this machine
1. Hugely efficent: the device is automatic and with significantly less energy usage.
2. Specific screw style: We will design the screw up to customer different substance and the material of screw and barrel can be 38CrMoAL or bimetallic.
three. This equipment can have out ideal viscosity of PET CZPT challenging precystallization dryer method. Only a bit IV will be diminished. It can improve IV in the problem of incorporating some appropriate additive.
5. The equipment wih long existence.

other type of these kinds of machine

Model	TSSK20	TSSK30	TSSK35	TSSK50	TSSK65	TSSK72	TSSK92
Screw diameter(mm)	21.seven	30	35.6	50.five	62.4	71.2	91
Rotary velocity(rpm)	600	four hundred	four hundred/600	500/600	400/five hundred	four hundred/500	four hundred/five hundred
Principal motor power(kw)	4	eleven	11/15	37/forty five	55/75	ninety/a hundred and ten	220/250
L/D	32-40	28-forty eight	32-forty eight	32-forty eight	32-48	32-48	32-40
Capability(kg/h)	two-ten	five-thirty	10-eighty	20-one hundred fifty	100-300	three hundred-600	600-1000

Structure of the equipment

Much more particulars equipment photoes
Crystallization dryer: dryer the PET flakes in progress
Vulume: 1000L.
Heater electricity: 36kW
Warmth way: by electric powered
Blower electrical power : 4kW
Mixer energy: 2.2kW
Mixer shaft: SS304
Material: Inside stainless steel, outdoors A3, With heat insulation layer.
With the open door on the hopper, it will be effortlessly run.

Solitary screw feeder  For feeding the flakes into the extruder:
Feed the PET flakes into the extruder, single screw feeder, feeding the substance similarly and stably.
Horizontal screw parameter:
Screw diameter:φ60
Power:1.5kw
Content of hopper: SS304
There is sight glass on the hopper, worker can be see the materials in the hopper

Twin screw extruder device
Barrel number: ten
Duration of barrel #1-10 is 234mm
Complete length of barrels: ~2340mm
Barrel #1-nine produced of 38CrMoAl materials, Hardened to ≥61HRC
The barrel part are cooled with drinking water, each barrel adopts single throttle and solenoid valve, and solenoid valve imported from Italy.
Barrel#1 open for feeder, Barrel#four: open up barrel, for all-natural degassing, Barrel#6, Barrel#sixty eight: open barrel, for vacuum degassing. The other folks is closed.
The processing part is offered with stainless metal protect as a security towards.
Diameter :62.four mm L/D: 36:1
Centre length: 52mm
Content of screw: W6Mo5Cr4V2
Rotating pace (counter rotating): 400RPM
A pair of screw shafts, total with screw elements, screw shafts  substance is 40CrNiMo, Hardened to ≥61HRC

The material arrive out from the die(pull entice like noodles pelletizing way, PET need to use this pelletizing way. And the its need to have good vacuum, like roots pump, then the pellets will be much better)

Cooling for the screw( drinking water managed by electric valves)

Screw components of the machine

Vacuum, we can use Roots vacuum or Bipolar pump.

Degassing on the extruder

Drinking water tank
Content come from the die and go into the drinking water tank for cooling, There is rubber roller in the tank, content strap can be send out into gale dryer to blower the h2o on its floor.
Length of tank : 4m,
Materials of tank is SS304, Material of bracket :Q235
It Can be moved up and down, CZPT and back again up to the die and substance necessary.
Energy of blower on gale dryer:2.2kW

Pelletizer
A. Portal shaped variety pelletizer,horniness alloy rotary cutter
B. capability:300kg/hr
C. motor electricity:4KW
D. Cutter diameter: 300mm
E. Blade width: 20mm
F. Traction velocity :30-90m/min
G. No. of cutter gears: 32
H. Max variety of lines: much less than sixty
Ultimate pellets and Raw substance

If you need  more specifics of this sort of equipment kindly speak to me, I can send out you more detail photoes and  vedios.

one. We supply under necessary files with the equipment:

1. Device structure
2. CZPTity diagram
3. Device certificate
4. CZPT handbook ebook/maintenance e-book

two. We gives a single-12 months high quality promise. During this period, if the machine’s malfunction is approved to be our duty, we will ship the damaged spare components to you with DHL courier or other way inside of 7 workdays soon after obtaining the complainant. And ship the experts to the buyer’s manufacturing facility for keeping. All expenses are in our account.

three. Following one year assure, If you need we can provides payable spare areas and technician’s Browsing maintenance, and any broken spares we can send out you quickly as attainable.

four. We believe in that our quotation meets with your needs and we will gladly furnish you with more data.

5. 24Hours service :  Cell-139157 0571 8