1.Introduction
KYDH separator are mainly applied in the purification and clarification of the diesel,
light fuel oil, heavy fuel oil and other mineral oil.used to remove the water, moisture, mechanical
impurities and some harmful substances of the oil.This model are automatic slagging type, high
separation efficiency, no need to disassemble to slagging.Can be automatic controlled according
to to requirements which greatly reduce the labor intensity of the operating.This machine by the
accurate calibration balancing, little vibration,can be long-running and operated safety and reliable.
2.CZPT parameter
Rated Capacity:6000 L/h(No.0light diesel oil)
Drum diameter:430mm
Energy:11kW
Drum Speed:6000 r/min
Discharge:automatic discharging
Pump pressure:≥0.2MPa
Vibration speed:≤4.5 mm/s
Noise level:≤90 dB(A)
Weight:~1000 kg
Size(L*W*H):1152mmX880mmX1400mm
Separation temperature of heavy fuel oil:95~98°C
three.Separation conditions and actual productivity of mineral oil
Item |
Gasoline oil |
Lube oil |
||||||||||||
Distillate Gas Oil |
residual gas oil |
brandedoil |
purified oil |
Steam turbine oil |
||||||||||
kinematicviscosity/(mmtwo/s) |
1.9~5.five |
5.5~24 |
60 |
eighty |
a hundred and twenty |
a hundred and eighty |
380 |
460 |
600 |
a hundred~a hundred and twenty |
sixty one.2~74.8 |
|||
40°C |
50°C |
40°C |
40°C |
|||||||||||
Density/ (kg/mm3)(20°C) |
<900 |
900~991 |
880~900 |
<900 |
||||||||||
separation temperature/°C |
twenty |
40 |
75 |
80 |
90 |
98 |
eighty |
seventy five |
||||||
The ratio of real productiveness and rated capacity % |
one hundred thirty |
one hundred |
70~75 |
60~65 |
fifty five~sixty |
45~50 |
35~forty |
25~thirty |
twenty~twenty five |
fifty~60 |
twenty five~30 |
eighty~85 |
||
Notice:the ratio of genuine efficiency and rated potential is a hundred% |
4.Constructions
Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover
six.engine base 7.Motor
(1).Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly,
low noise and vibration, the installation path is very easy to operate.
(two)The main strengthen parts of Roller body and Roller cover use 2Cr13,and the other parts of
contacted materials such as Disc all use 316L
(3)The Stainless steel cover use SUS304
(four)The base use casting steel, coating does the same way as ship bottom.
CZPT Parameter:
No. |
Product |
Capability (l/h) |
Drum diameter (mm) |
Drum speed |
Motor Electrical power (KW) |
Discharge way |
Separator element |
Excess weight (kg) |
Size (mm*mm*mm) |
1 |
KYDR203CD-23 |
1500 |
230 |
6930 |
two.2 |
Guide |
6170 |
245 |
850*625*985 |
2 |
KYDH204SD-23 |
2000 |
270 |
7200 |
4 |
Automatic |
6950 |
550 |
865*645*1100 |
three |
KYDH206SD-23 |
3000 |
315 |
6500 |
five.five |
Automatic |
7000 |
650 |
900*600*1150 |
4 |
KYDH207SD-23 |
4000 |
385 |
6500 |
7.5 |
Automated |
7500 |
750 |
1100*1050*1250 |
5 |
KYDH209SD-23 |
5000 |
430 |
6000 |
eleven |
Automated |
8050 |
900 |
1200*950*1400 |
6 |
KYDH211SD-23 |
10000 |
500 |
5500 |
eighteen.5 |
automated |
8000 |
1200 |
1250*one thousand*1550 |
6.Product guarantee
one.one year warranty. Except natural or man-made wear and tear.
two.Providing life-long service, after warranty period, charges are reckoned by cost
seven.Equipment outlook figure:
speed can be achieved at present. The higher rotating speed, the better
separation effect.
8.Packaging & Shipping The parts are bolted to the wooden cases. with layers of plastic and standard wooden cases for packaging, it provide safe and convenient shippings.
Deal show: