IGBT 40KW Induction Heater Induction Heating Gear (JLCG-forty)

 

Principal Characteristic

• Ultrahigh series: high frequency, able to heat Φ 0.1mm work-piece.
• Small size, light weight, low failure rate and conservation of energy. (which can save the power by 70% as compared with glass-ceramic vacuum tube high frequency heating machine)
• It can ensure the solid welding point which is pleasing and delicate in appearance, integral geometric configuration, perfect surface grain, complete crystal structure of internal metal part, limited annealing range and elimination of obvious weld knot.
• About ten types fault protection and display of over-recent, over-voltage, water shortage and phase missing can provide higher reliability and durability.
• It is applied to the welding of coupler and inserts used in metal glass manufacturing as well as electric appliance and electronics industries, non-contact welding of internal parts of small-size relays, high-pressure refrigerating parts, headwear decorations, metal ornamental articles an art wares.

CZPT Parameters

Product	JLCG-40KW
Enter electrical power desire	three section 380V  50/60HZ
Max oscillate electricity	40KW
Max input recent	60A
Oscillate frequency	fifty-200KHZ
Cooling water want	>0.3MPa≥6L/Min
Responsibility cycle	100% 40°C
Proportions(L*W*H)	Generator: 640*three hundred*550mm
	Transformer: 470*320*430mm
Internet bodyweight	35kg/25kg
Cable size	2-six(Meters)

CZPT areas for JLCG-fortyKW Equipment

Product	Name of device or parts	Specification	Sum
1	JLCG-40KW Generator	–	one pcs
2	JLCG-40KW Transformer	–	1 pcs
three	Foot pedal	three main	one pcs
four	Induction Coil	–	two sets
5	Instruction Manual	–	1 pcs
six	Item catalog	–	two sets

Main Parts Introduction 

• Germany SIEMENS INFINEON IGBT Module. ( 40-60KHZ oscillation frequency, fast response time, superhigh stability, almost spatter-free welding )
• Japan Nichicon electrolytic capacitor. ( filter capacitor )
• CZPTed transistor integrated block.
• All water pipe use thermostability, High pressure resistance best quality material.
• Main card, signal circuit, drive circuit board,control circuit board and components are adopted:Toshiba, Hitachi,Motorola, China’s top manufacturers. 
• CZPT advanced all-strong-point out semiconductor power devices.
• CZPT advantage:perfect control, alarm display circuit, getting full automatic tracking frequency, continuous adjustable power, safe dependable protection,clear and accuracy data display and etc.
• Superiority Advantages: fast heating, wide application, small size, easy installation, simple operation, low power consumption, high efficiency.

Photographs of Solution:

 

Applications: Heat remedy, Welding, etc.
 

one.Warmth treatment method: such as Quenching, Annealing
    Warmth treatment approach is the metallic function-items heated to a specified temperature, attained distinct matrix group soon after various methods of cooling, so that to obtain the needed mechanical houses (material tougher or softer), such as quenching, annealing, and so on.
     Applications Illustrations: Shaft, Shaft core, Plate, Gear, Sprocket, Steel belt, Equipment resource equipment, Xihu (West Lake) Dis. rail, CZPT tools, Little mildew, Mold add-ons, CAM, Auto and motorcycle components, Scissors, Backyard garden shears blade, Chuck, mechanical areas, Stainless metal items, Cistern, Kitchen area ware, Golf head, Golf equipment, Metal tube, Furnishings fittings and Other relevant items.

2.Brazing, Welding, Soldering
    Brazing is a fusion and solidification procedure which refers to the use of magnetic area induction heating to make the temperature of steel materials junction achieve the melting position of welding, or the temperature of metal components to reach among nonmetallic material.
      (1). Any business of include welding material connection.
      Such as: Reducing equipment ( Turning, Milling cutter, Woodworking tools, Serrated blade, Shoe resources, Diamond tool, Deep hole drilling, Drilling etc.), Faucets, Bathroom accessories, Showers, Coal drill, Drill bit, Terminal blocks, Furniture fittings, Refrigeration tools, Pad tube, Heating plate, Egg beater, Lighting equipment, Department distributor, Bicycle up and down the fork iron, Copper pieces, Aluminum, Stainless metal.
    (2). Do not insert welding material connection.
      Such as: Pc radiator core and copper main, Motor rotor and shaft, Horn net preparetions, Hanger hook, Copier carbon brush melt, Aluminum-plastic pipe, Compound preparetions kettle, Tool shank remedy, Tableware curing rubber take care of, Battery pole ear forming, Aluminum foil sealing etc.

Bundle:

Firm Informations:

    HangCZPT CZPT Electromechanical Device Co.,Ltd., founded in 1996, which is engaged in R&D, 
production andsale of solid Induction heating machine professionally. Many senior experts of induction heating tools gathered listed here, who initiate the induction heating machines with environmental security and extremely successful strength conservation, positively and diligently. 

 

Our Solutions:

1. Pre-sale service:

• CZPTmmend the most suitable machine for customers, according to their requirements. 
• Inquiry and consulting support. 
• Sample testing support. 
• View our Factory.

two. In-sale service:

• Strictly manufacture the machine, according to relevant technical standards.
• Take run test, according to relevant equipment test run regulations.
• Strictly check up the machine, before delivery
• Delivery on time.

3. After-sale service:

• 12 months warranty period
• Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, CZPT shall provide replacement parts after detecting the faults.
• If any big quality problems occurs out of the guarantee period, CZPT will send maintenance
• Technician to provide visiting service after checking with the customer and charge for a favorable price. 
• CZPT will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
• The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.

FAQ
China Materials Induction Heating Energy Source   
Questions and Answers:

1. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.

2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.

three.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.

four. Which export port you use?
Any China port, commonly we will use HangCZPT ,HangCZPT ,Hongkong port, it can appoint as you like.

5.How about the payment terms and delivery time ?
Payment phrases for little devices: one hundred% T/T/ Western Union/Income in advance.
The big equipment and massive quantity: thirty% deposit,70% before shipment (we will shoot total delivering process for customer’s confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.

6.If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.

7.Is your goods has CZPT or CE certificate ?
Sure, all our goods has ISO and CE certificate. All equipment are higher high quality goods.

8.What is your nature of your company:vendor or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and contact us. 

 

 

 Ultrahigh Frequency Series JLCG (100KHZ-1.1MHZ)

Design	JLCG-3	JLCG-six	JLCG-ten	JLCG-twenty	JLCG-thirty	JLCG-40	JLCG-sixty	JLCG-one hundred
Enter energy need	Single stage 220V  50/60HZ		three section 380V  50/60HZ
Oscillate energy max	3KW	6KW	10KW	20KW	30KW	40KW	60KW	100KW
Max input existing	14A	28A	20A	32A	45A	60A	90A	152A
Oscillate frequency	.five-one.1MHZ	.two-1.1MHZ	200-500KHZ	fifty-250KHZ	fifty-200KHZ	50-200KHZ	50-150KHZ	fifty-150KHZ
Cooling h2o need	>0.2MPa  2-6L/Min			.3Mpa≥6L/MIN			.5Mpa≥6L/MIN
Responsibility cycle	a hundred% 40°C
Net excess weight	15kg	25kg	30kg	25kg/15kg	30kg/20kg	35kg/25kg	45kg/35kg	60kg/40kg
Cable length	two-six(Meters)