CZPT High Pace Compact Servo Motor Makers
57IV90/57IV130/57IV180 Attributes
1.Functioning voltage: DC input voltage 15VDC to 50VDC ,suggest voltage is 36V
2.The max continuous output existing is 10A, the max peak present is 22A (three times overload potential)
three.Satisfactory differential or one-finished pulse / direction command, have 3 handle mode of situation, pace and torqe
four.Utilizing FOC magnetic placement manage engineering and place vector pulse width modulation (SVPWM) closed-loop handle engineering
5.The amount of pulses per cycle (subdivision) can be established by the debug software or the dial change environment(electronic equipment ratio)
six.Have 3 varieties of 90w,130w and 180w DC brushless servo motor to select.
7.Have protection of overvoltage, undervoltage, overcurrent and tolerance,and many others.
8.Solitary / double pulse method, the pulse legitimate edge can be pick.
9.The max pulse frequency of manage instruction is 500KHz (factory default is 200KHz)
ten.Pulse, route and enable sign input interface degree is four.5 to 28V appropriate
eleven.With serial RS232 / RS485 debugging perform, but want to use our specific serial debugging cable
twelve.Functionality: clean velocity, little overshoot ,modest monitoring error, low warmth of motor and driver
Driver Model And Selection Xihu (West Lake) Dis.
| Motor Type | 57IV90 | 57IV130 | 57IV180 | |
| Rated power(W) | 90W | 130W | 180W | |
| Vector Maximum Current | 16A | 18A | 22A | |
| Body Length(MM) | 106.2 0.5 | 126.2 0.five | 146.2 0.5 | |
| Operation Voltage | fifteen-50Vdc,36Vdc recommend | |||
| Overvoltage Protection Voltage | 68Vdc±2 | |||
| Control Method | 32 bits DSP vector FOC control technology | |||
| Pulse Limit Frequency | 500KHz(factory default 200KHz) | |||
| Security | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||
| Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level 4.five-28Vdc compatible, no need external current limiting resistor |
|||
| Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc |
|||
| Electronic Gear Ratio | Default 4000 / rev, through the DIP switch or debug software setting subdivision (200-51200) |
|||
| Position Error Control Accuracy | ±1 Pulse | |||
| Speed Control Accuracy | ±2 rpm | |||
| Maximum Acceleration | 100 rpm/ms | |||
Dialing Change Settings
| Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| a thousand | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Subdivision accuracy (digital equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the push uses the internal default micro-stage subdivision, the default inner subdivision of the driver is 400Pulse / rev, and the digital gear ratio can also be set by the debugging computer software. SW5 set the motor path,when turnON, the motor turns clockwise (CW),when flip OFF, the motor turns counterclockwise(CCW). SW6 control mode variety, whenON, the motor enters the self-check manner,creating a single CZPT and reverse revolution, has been recurring right up until exit self-take a look at method, the external control sign is invalid at self take a look at method, whenOFF, the motor exits self-test method,then the external management signal is legitimate.
Mechanical Structure Dimension
| Driver mode | Motor body length(mm) | Driver thickness(mm) | Integrated motor driver length(mm) |
| 57IV90 | 76 | 30.two | 106.2 |
| 57IV130 | ninety six | thirty.two | 126.2 |
| 57IV180 | 116 | 30.two | 149.2 |
Observe : All over is normally utilised, and we can personalize according to your request or select the suitable design for you, you should tell us following parameters: existing, voltage, holding torque, body size,the application region.
Application
Appropriate for all kinds of small and medium-sized automation equipments and devices. This kind of as: laser products, medical tools, 3D printer, modest and medium-sized engraving machine, electronic processing products, automated crawling products, particular CNC equipment device, packaging equipment and robotic. It is especially beneficial for consumers who assume low sound and high velocity apps.
Packaging and delivery
one.Outer packing: CZPT export carton with necessary shipping marks
2.Interior packing: Water-proof packing with shock absorbing EPE and cardboard surrounded
3.As for each the customers needs
Our service
one.Functioning time : eight:00 a.m – 10:00 p.m .Any inquiries, remember to notify us freely, we will be reply you asap.
two.Guide time : For samples, two to 5 times will be Okay. For mass generation, the lead time rely on the quantities you need to have.
three.Warrantity period of time : 18 months and Lifestyle-extended servicing provider for the product.
4.We acknowledge merchandise personalize.
FAQ
Q1: How to decide on the suitable stepper or servo motor?
A1: There are serveral essential items: size, size, holding torque, voltage, current and many others.After validate them and instructed us, we can decide on the suitable 1 for you.
Q2: Any other techniques to finalize the model?
A2: Sure, you can deliver us the model you are making use of, we can support you find the suited one particular.
Q3:How to ensure the Top quality of CZPT Components?
A3: We have the built-in program for industrial elements top quality control. We have IQC (incoming quality control), IPQCS (in procedure top quality manage section), FQC (last quality management) and OQC (out-going quality handle) to manage every method of industrial areas prodution.
Q4:What is the Edge of Your Components for Business Merchandise?
A4:1.The benefit of our items is the aggressive rates, quick supply and large quality. Our
staff are liable-oriented, pleasant-oriented,and diligent-oriented. Our goods are featured by strict tolerance, sleek finish and lengthy services time.
2.Just before we deliver out the merchandise,we verify them much more than 3 instances.
Speak to
