Topbest-SM-6331
Desktop Screw Magnetic Feeding Solitary CZPT Twin Rail Robotic Fastening Machine
Robotic screw driving device is created for screw fastening with substantial precision automatically.
Parameters
| Model | Topbest-SM-6331 | |
| Dimension | 800mmX630mmX780mm | |
| Max. product measurement | 250*280mm | |
| Driving manner | Closed-loop motor+synchronous belt | |
| Management mode | Microcontroller, contact panel | |
| Moving variety | X Axis | X=580mm |
| Y1/Y2 Axis | Y1=280mm,Y2=280mm | |
| Z Axis | Z=100mm | |
| Max. pace | X, Y1/Y2 Axis | 600mm/sec. |
| Z Axis | 400mm/sec. | |
| Recurring accuracy | X, Y1/Y2 Axis | ±0.02mm |
| Z Axis | ±0.02mm | |
| Memory | 1000 information | |
| Screwdriver | SD/KILEWS/HIOS | |
| Screw feeding | Magnetic feeding | |
| Max load | 15KG | |
| Alarm program | Screw stripped alarm | |
| Programming | Remote training / Guide data input | |
| Net bodyweight | 76KG | |
| Input voltage | 220V AC/50Hz(110V AC/60Hz) | |
| Air stress | .4~.8MPa | |
| Function atmosphere | ~40ºC, Humidity twenty%~95% | |
Characteristics
one. Automatic screw feeding.
two. Dual rail to improve performance.
three. Deep-gap screw fastening
four. Smart screwdriver to file torque for every screw (option).
Edge
Deep-gap screw fastening
Online video
EPwatch?v=8MBWEvKGQWE&attribute=youtu.be
FQA
1. Why is Robotic Screw driving equipment?
— To give better in term of high quality this sort of as exact same study out trace torque for each point of manufacturing.
— Higher efficiency by minimizing manpower at minimum 1 to three particular person.
2 What are the feeding types for the Robotic Screw Driving System?
— We using the vibrator to kind the screw dependent on screw kind and size.
— Firstly we utilizing the choose and place of the screw presenter.
— Another way is we employing air blowing to feed immediately to the screwdriver.
3. How to implement the screw to the item?
— Mainly, we have 2 ways to screw the item which is magnetic for ferrous screw and vacuum for all material such as ferrous, copper, stainless steel screw.
4. What kind of screws are suit for the air blowing sort device?
— Screw versions M1.four~ M4 are fit for air blowing feeding of screw driving machine.
— Screw size have to much less than 16mm. If far more than, the feeder needs to be CZPT.
— The screw’s length have to be more than one.two moments of diameter for air blowing feeding variety to avert the screw from change more than inside of the feeder’s tube.
5. What kind of screws are match for the screw presenter kind machine?
— Screw versions M0.eight ~ M4 are match for Magnetic, vacuum feeding of screw driving device.
— Machine screws, self-tapping screws, and many others.
6. When does the equipment have numerous electric powered screwdrivers?
— For higher effectiveness, we provide dual screwdriver for at the same time fastening for the product in array place.
7. What does an electric screwdriver the equipment use?
— Currently, we are using the electric screwdriver from Kilews, Sudong, DEPRAG, DESOUTTER, MOUNTZTORQUE, HIOS, and Atlas.
8. What is the range of the tapped hole’s depth on the merchandise?
— The selection is about 20mm, relying on consumer item and have to be magnetic screw sort.
9. What is the frequent problem throughout the fastening procedure?
— There are 5 typical issues could arise all through the process this kind of as misalignment entry, broken screw, damaged thread, lacking component and floating screw.
10. What are the variances between SC-two and GW-four ?
— GW employing gravity to transfer the screw to the nozzle and drive to release the screw. The screwdriver nozzle contacted with the product area and it is likely to somewhat damage the surface area.
— SC-two using air blowing to transfer the screw to the nozzle and drive button to release the screw.
11. How is dual rail functioning?
— Our equipment has a twin rails system to allow loading on the next rail at the same time whilst the initial rail is on the fastening process.
12. What is the objective of one rail system?
— One rail system occupy modest workspace or bigger product.
13. Does the device arrive with a warranty?
— The device comes with one particular yr warranty excluding consumable elements.
14. How about after-sale service?
— We provide distant video clip and 24hours phone or you may possibly visit our organization. On-web site services will be charged appropriately.
fifteen. What is the measurement of the operating base?
— Working base dimension as mentioned for each equipment. Fixture size need to be in thing to consider. However, the measurement of products can be CZPT in accordance to customers.
16. Does the enclosure include?
— You may possibly decide on a design with or CZPT an enclosure.
seventeen. What are the protection functions of the machine?
— The crisis button is accessible for all devices. The protection doorway is optional.
eighteen. Is the screw driving method suitable with other robots?
— Our screw driving system is appropriate with the SCARA robotic, six axles robotic.
19. Can I be your distributor?
— Yes, we are open up to any business that would like to turn out to be our distributor apart from in certain areas we currently have our possess agent.
20. Do you provide a fixture for the device?
— Yes, we also can design and style the fixtures based mostly on client products. For case in point, a rolling fixture for a number of surfaces fastening.
21. What is the supply phrase?
— EXW, FOB, DAP, FCA.
— Lead time is 20 business times.
