Tag Archives: servo motor reducer

China best Right Angle Planetary Commutator Reducer Hole Shaft Output 400W 750W Servo Motor Gearbox vacuum pump distributors

Product Description

 

Installation Instructions

 

 

Right angle planetary commutator reducer hole shaft output 400W 750W servo motor gearbox
LANETX planetary reducer
Advantage:Pratt commutator is characterized by maintenance free, low noise, small volume, large torque, high precision, long service life, low back clearance, etc

Lifetime:20000h
Minimum operating temperature:-25ºC
Maximum operating temperature:+90ºC
Degree of protection:IP65
Lubrication method:Long term lubrication
Installation method:Any
Direction of rotation: Output, input in the same direction
Full load efficiency:1-stages 90%

  1. stages 88%
  2. Stages 84%
Model Unit AT042A AT060A AT085A AT110A Ratios Steges
Rated output torque Nm   19.0 50.0 160.0 1 1-stages
4.5 25.0 60.0 140.0 2
6.0 16.5 60.0   3
4.0 12.0 40.0   5
4.7 26.0 60.0 140.0 6 2-stages
4.9 27.0 63.0 148.0 8
5.1 28.0 66.0 155.0 10
5.3 29.0 68.0 160.0 14
5.5 30.0 72.0 165.0 20
Fault stop torque Nm 32*Nominal torqute
Backlash arcmin ≤2 ≤2 ≤2 ≤3 P1 1-stages
≤6 ≤6 ≤6 ≤7 P2
≤5 ≤5 ≤5 ≤6 P1 2-stages
≤12 ≤12 ≤12 ≤14 P2
Rated input speed rpm 3000 3000 3000 2500    
Maximum input speed rpm 6000 6000 6000 5000
Noise dB ≤60 ≤62 ≤65 ≤68

 

We strive to be meticulous in every process and perfect in every detail. Integrate the production management system, inspection and test system, quality control system, etc. into the production process of all products, widely use advanced technology, production and inspection equipment, and truly achieve high quality and high standard service for customers at home and abroad!
company-HangZhou-PLT-Transmission-Equipment-Co-Ltd-.html

 
 

 

HangZhou CHINAMFG Transmission Equipnenit Co,Ltd
is based on the global industrial automation field. it is
saies of planetary reducers, hollow rotary platforrres, 
a manufacturer specializing in R&D, production and
  and special reducers. It belongs to “National High-tech 
 
Enterprise”. The headquarters and production center are located in HangZhou City,ZheJiang Province, which is known as the “world factory”, and there are service centers and transit warehouses in ZheJiang . ZheJiang ,HangZhou and other places.
The company’s core team members have more than 10 years of experience in the transmission industry and gear processing industry, and are good at solving a variety of internal and external gears and processing solutions. The company has summed up a complete set of “transmission quality management system” to ensure the relative accuracy of each component after combination,and provide high pass rate and high efficiency guarantee for the whole machine to leave the factory. We use advanced computer software for design and demonstration,combined with years of experience in mechanical transmission and motion
control, to provide global motion and control solutions. Our products have the characteristics of high precision, large bearing torque, long life, low noise, stable operation, strong versatility and maintenance-free Quality is the foundation of enterprise survival. We provide the market with stable and high-quality products and provide more optimized automation
solutions. Always take “user demand” as the business purpose of the enterprise, take “scientific and
technological innovation” as the foundation of the company’s development, and implement the Iso
quality management system operation into all aspects of the company.
Our products are widely used in aerospace,CNC machine tools, cutting and welding equipment,textile printing and dyeing machinery packaging machinery, food machinerymedical machineryships,radardata communication systems,robots,robotic arms, composite materials equipmentprecision testing
Instruments, testing machines,plastic machinery, glass machinery,coal mining machinery,lifting machinery, metallurgical machinery,construction machinery and other fields.
The process of our pursuit of success is the process of continuous sublimation of our relationship with you. The success of the company is inseparable from the long-term support and help of many customers and friends. Facing the future, we will serve you more. HangZhou CHINAMFG Transmission Equipment Co.,Ltd. will go hand in hand with you to create brilliant!

Q: How to get a quick quote
A: Please provide the following information when contacting us

  1. Motor brand
  2. Motor model
  3. Motor dimension drawing
  4. What is the gear ratio

Q: How long is your delivery date
A: We all install it now, but it takes 3-5 days if it is not non-standard. Non standard 10-15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 1 Year
Classification: Gear Parts
Processing Type: Metal Processing
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

variator motor

Can variator motors be used in both fixed and variable speed applications?

Yes, variator motors can be used in both fixed and variable speed applications. Here’s a detailed explanation:

Variator motors, also known as variable speed motors or adjustable speed motors, are designed to provide flexibility in adjusting the motor’s speed according to the specific requirements of the application. This versatility allows them to be used in a wide range of applications, whether the desired speed is fixed or variable.

Here are some key points to consider regarding the use of variator motors in fixed and variable speed applications:

  • Fixed Speed Applications: In fixed speed applications, where a constant speed is required throughout the operation, variator motors can still be used effectively. The motor can be set at the desired fixed speed during installation or through the control system. The advantage of using variator motors in fixed speed applications is that they often offer high efficiency and reliable performance, which can contribute to energy savings and reduced maintenance needs.
  • Variable Speed Applications: Variator motors are particularly well-suited for variable speed applications, where the speed requirements may change based on different operational conditions or process demands. These motors allow for precise control over the motor’s speed, enabling optimization of the application’s performance. By adjusting the speed according to the specific requirements, variator motors can improve energy efficiency, enhance process control, reduce wear and tear on mechanical components, and enable better synchronization with other system elements.
  • Speed Adjustment Range: Variator motors offer a wide range of adjustable speeds, allowing them to accommodate both fixed and variable speed applications. The speed adjustment range can vary depending on the specific model and type of variator motor. Some motors may have a limited range, while others can provide a broad range of speeds, spanning from low RPMs to high RPMs. When selecting a variator motor for a specific application, it’s essential to consider the required speed range and ensure that the motor can operate within those speed limits.
  • Control Options: Variator motors often come with various control options that allow for easy adjustment of the motor’s speed. These control options can include manual control through potentiometers or dials, digital control through interface panels or keypads, or even programmable control through communication protocols such as Modbus or Ethernet. These control options facilitate the use of variator motors in both fixed and variable speed applications, as they provide flexibility in setting and changing the desired speed.
  • Application Versatility: Variator motors are versatile and find applications in various industries and sectors. They can be used in applications such as conveyors, pumps, fans, compressors, mixers, machine tools, HVAC systems, robotics, and more. This versatility demonstrates how variator motors can be utilized effectively in both fixed and variable speed applications across different industries.

Overall, the use of variator motors offers flexibility and adaptability to meet the speed requirements of different applications, whether fixed or variable. By selecting the appropriate motor model, determining the desired speed range, and utilizing the available control options, variator motors can provide efficient and reliable performance in a wide range of applications.

variator motor

Are there cost considerations when choosing variator motors for industrial use?

Yes, there are several cost considerations that come into play when choosing variator motors for industrial use. Here’s a detailed explanation:

When selecting variator motors for industrial applications, it’s important to evaluate not only the initial purchase cost but also the overall cost of ownership throughout the motor’s lifespan. Here are some key cost considerations to keep in mind:

  • Motor Cost: The initial purchase cost of the variator motor is an important consideration. The cost can vary depending on factors such as motor power rating, brand, quality, and additional features. It’s essential to compare prices from different suppliers and manufacturers to ensure a competitive and reasonable cost for the motor.
  • Efficiency: The energy efficiency of the variator motor can have a significant impact on long-term operating costs. More efficient motors consume less energy, resulting in reduced electricity bills. It’s advisable to choose high-efficiency motors that meet or exceed the minimum efficiency standards set by regulatory bodies, such as the International Electrotechnical Commission (IEC) or the National Electrical Manufacturers Association (NEMA). Although high-efficiency motors may have a higher initial cost, the energy savings over the motor’s lifespan can offset the additional investment.
  • Maintenance and Service: Consider the maintenance requirements and associated costs of variator motors. Motors that require regular maintenance, such as lubrication, bearing replacements, or brush inspections, may have higher maintenance costs compared to maintenance-free or sealed motor designs. It’s important to factor in the anticipated maintenance needs and costs when evaluating the overall cost of ownership.
  • Durability and Reliability: Variator motors that are built to withstand harsh operating conditions and have a long service life can offer cost advantages in the long run. Although more durable and reliable motors may have a higher upfront cost, they can minimize the need for premature motor replacements, reduce downtime, and lower maintenance and repair expenses. It’s crucial to assess the motor’s quality, reputation, and warranty provisions to gauge its expected durability and reliability.
  • Control and Automation: Variator motors often come with various control options and compatibility with automation systems. While these features can enhance operational efficiency and control, they may have associated costs. Consider the cost of control devices, such as variable frequency drives (VFDs), sensors, and monitoring equipment. Additionally, if integrating the motor into an existing automation system, ensure compatibility and account for any necessary upgrades or modifications.
  • Application-Specific Requirements: Some industrial applications may have specific motor requirements that can impact costs. For example, if the motor needs to operate in extreme temperatures, hazardous environments, or corrosive atmospheres, special motor designs or materials may be necessary, which can increase costs. It’s important to evaluate any application-specific requirements and associated costs when selecting variator motors.
  • Future Expandability: Consider the scalability and expandability of the motor system. If there are possibilities of future capacity expansions or modifications to the industrial process, choosing a motor that can accommodate such changes can prevent the need for a costly motor replacement in the future.

By carefully considering these cost factors, industrial users can make informed decisions when selecting variator motors that strike a balance between upfront costs and long-term operational expenses. It’s advisable to consult with motor suppliers, engineers, and industry experts to assess the specific cost considerations relevant to the industrial application and ensure the optimal motor choice.

variator motor

In which industries are variator motors commonly used for different applications?

Variator motors, with their adjustable speed control capabilities, find applications in various industries where precise speed control, energy efficiency, and adaptability to changing operational requirements are essential. Here are some industries where variator motors are commonly used for different applications:

  • Industrial Manufacturing: Variator motors are extensively utilized in industrial manufacturing processes. They can be found in machinery and equipment such as conveyors, mixers, extruders, and packaging machines. The ability to adjust the speed of these motors allows for efficient material handling, mixing, blending, and product packaging.
  • Material Handling and Logistics: In the material handling and logistics industry, variator motors are commonly employed in conveyor systems. These motors enable precise control of product movement, allowing for smooth and efficient transfer of goods in manufacturing plants, warehouses, airports, and distribution centers.
  • Pumping and Water Treatment: Variator motors are utilized in pumping systems for water treatment, wastewater management, and irrigation. The adjustable speed control feature enables the optimization of pumping rates based on demand, resulting in energy savings and improved system efficiency.
  • HVAC (Heating, Ventilation, and Air Conditioning): Variator motors play a crucial role in HVAC systems, particularly in fans and blowers. By adjusting the motor speed, these systems can modulate the airflow and temperature control, ensuring optimal comfort and energy efficiency in commercial buildings, residential complexes, and industrial facilities.
  • Automotive Industry: Variator motors are used in various applications within the automotive industry. They can be found in vehicle cooling systems, power steering systems, and engine control units. The ability to adjust the motor speed allows for efficient cooling, precise steering assistance, and optimal engine performance.
  • Renewable Energy: Variator motors are employed in renewable energy systems such as wind turbines and solar tracking systems. In wind turbines, variator motors enable the adjustment of blade pitch for optimal power generation. In solar tracking systems, they control the movement of solar panels to maximize exposure to sunlight throughout the day.
  • Food and Beverage: Variator motors find applications in the food and beverage industry, particularly in mixing, blending, and processing equipment. They enable precise control of speed and agitation, ensuring consistent product quality and efficient production processes.

These are just a few examples of industries where variator motors are commonly used. Their versatility and ability to provide adjustable speed control make them suitable for a wide range of applications across different sectors.

China best Right Angle Planetary Commutator Reducer Hole Shaft Output 400W 750W Servo Motor Gearbox   vacuum pump distributorsChina best Right Angle Planetary Commutator Reducer Hole Shaft Output 400W 750W Servo Motor Gearbox   vacuum pump distributors
editor by CX 2023-12-19

China manufacturer Right Angle Commutator Precision Planetary Reducer Stepper Servo Motor vacuum pump oil

Product Description

Installation Instructions

 

 

Right angle commutator precision planetary reducer stepper servo motor
LANETX planetary reducer
Advantage:Pratt commutator is characterized by maintenance free, low noise, small volume, large torque, high precision, long service life, low back clearance, etc

Lifetime:20000h
Minimum operating temperature:-25ºC
Maximum operating temperature:+90ºC
Degree of protection:IP65
Lubrication method:Long term lubrication
Installation method:Any
Direction of rotation: Output, input in the same direction
Full load efficiency:1-stages 90%

  1. stages 88%
  2. Stages 84%
Model Unit AT042A AT060A AT085A AT110A Ratios Steges
Rated output torque Nm   19.0 50.0 160.0 1 1-stages
4.5 25.0 60.0 140.0 2
6.0 16.5 60.0   3
4.0 12.0 40.0   5
4.7 26.0 60.0 140.0 6 2-stages
4.9 27.0 63.0 148.0 8
5.1 28.0 66.0 155.0 10
5.3 29.0 68.0 160.0 14
5.5 30.0 72.0 165.0 20
Fault stop torque Nm 32*Nominal torqute
Backlash arcmin ≤2 ≤2 ≤2 ≤3 P1 1-stages
≤6 ≤6 ≤6 ≤7 P2
≤5 ≤5 ≤5 ≤6 P1 2-stages
≤12 ≤12 ≤12 ≤14 P2
Rated input speed rpm 3000 3000 3000 2500    
Maximum input speed rpm 6000 6000 6000 5000
Noise dB ≤60 ≤62 ≤65 ≤68

 

We strive to be meticulous in every process and perfect in every detail. Integrate the production management system, inspection and test system, quality control system, etc. into the production process of all products, widely use advanced technology, production and inspection equipment, and truly achieve high quality and high standard service for customers at home and abroad!
company-HangZhou-PLT-Transmission-Equipment-Co-Ltd-.html

 
 

 

HangZhou CHINAMFG Transmission Equipnenit Co,Ltd
is based on the global industrial automation field. it is
saies of planetary reducers, hollow rotary platforrres, 
a manufacturer specializing in R&D, production and
  and special reducers. It belongs to “National High-tech 
 
Enterprise”. The headquarters and production center are located in HangZhou City,ZheJiang Province, which is known as the “world factory”, and there are service centers and transit warehouses in ZheJiang . ZheJiang ,HangZhou and other places.
The company’s core team members have more than 10 years of experience in the transmission industry and gear processing industry, and are good at solving a variety of internal and external gears and processing solutions. The company has summed up a complete set of “transmission quality management system” to ensure the relative accuracy of each component after combination,and provide high pass rate and high efficiency guarantee for the whole machine to leave the factory. We use advanced computer software for design and demonstration,combined with years of experience in mechanical transmission and motion
control, to provide global motion and control solutions. Our products have the characteristics of high precision, large bearing torque, long life, low noise, stable operation, strong versatility and maintenance-free Quality is the foundation of enterprise survival. We provide the market with stable and high-quality products and provide more optimized automation
solutions. Always take “user demand” as the business purpose of the enterprise, take “scientific and
technological innovation” as the foundation of the company’s development, and implement the Iso
quality management system operation into all aspects of the company.
Our products are widely used in aerospace,CNC machine tools, cutting and welding equipment,textile printing and dyeing machinery packaging machinery, food machinerymedical machineryships,radardata communication systems,robots,robotic arms, composite materials equipmentprecision testing
Instruments, testing machines,plastic machinery, glass machinery,coal mining machinery,lifting machinery, metallurgical machinery,construction machinery and other fields.
The process of our pursuit of success is the process of continuous sublimation of our relationship with you. The success of the company is inseparable from the long-term support and help of many customers and friends. Facing the future, we will serve you more. HangZhou CHINAMFG Transmission Equipment Co.,Ltd. will go hand in hand with you to create brilliant!

Q: How to get a quick quote
A: Please provide the following information when contacting us

  1. Motor brand
  2. Motor model
  3. Motor dimension drawing
  4. What is the gear ratio

Q: How long is your delivery date
A: We all install it now, but it takes 3-5 days if it is not non-standard. Non standard 10-15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand

 

Warranty: 1 Year
Classification: Gear Parts
Processing Type: Metal Processing
Match Machine: Spinning Equipment
Material: Metal
Processing Level: Precision Finishing
Customization:
Available

|

variator motor

What factors should be considered when selecting a variator motor for a specific application?

When selecting a variator motor for a specific application, several factors should be considered to ensure optimal performance and compatibility. Here are some key factors to take into account:

  • Load Characteristics: Consider the specific characteristics of the load the motor will be driving. This includes factors such as the torque requirements, speed range, and variations in load demand. Understanding the load characteristics helps in selecting a variator motor with the appropriate power and speed capabilities to meet the application’s requirements.
  • Speed Range: Determine the required speed range for the application. Variator motors offer the advantage of adjustable speed control, but different models may have different speed ranges. Ensure that the selected variator motor can operate within the desired speed range to meet the application’s needs.
  • Power Rating: Consider the power rating required by the application. This involves assessing the motor’s ability to deliver the necessary torque and power output to drive the load effectively. It’s important to select a variator motor that can handle the power requirements of the application without operating at its maximum capacity continuously.
  • Environmental Conditions: Evaluate the environmental conditions in which the variator motor will operate. Factors such as temperature, humidity, dust, vibrations, and corrosive substances can impact motor performance and longevity. Choose a variator motor that is designed to withstand the specific environmental conditions of the application, such as motors with appropriate protection ratings or specialized coatings.
  • Efficiency and Energy Savings: Consider the desired energy efficiency of the system. Variator motors can offer energy savings through adjustable speed control, but efficiency levels can vary between models. Look for motors with high efficiency ratings, such as those meeting energy efficiency standards like IE3 or IE4, to optimize energy consumption and reduce operating costs.
  • Control and Integration Requirements: Assess the control and integration needs of the application. Determine whether the variator motor requires specific control interfaces or communication protocols to integrate with the automation system effectively. Consider compatibility with existing control systems, such as programmable logic controllers (PLCs) or industrial communication networks, to ensure seamless integration and ease of operation.
  • Reliability and Maintenance: Evaluate the reliability and maintenance requirements of the variator motor. Consider factors such as the expected lifespan, durability of components, availability of spare parts, and ease of maintenance. Choosing a motor from a reputable manufacturer with a track record of reliable products and good customer support can help ensure long-term performance and minimize downtime.
  • Cost Considerations: Finally, consider the cost of the variator motor, including the initial purchase cost as well as long-term operating costs. While it’s important to find a motor that meets the application’s requirements, it’s also essential to consider the overall cost-effectiveness and return on investment. This includes factors such as energy savings, maintenance costs, and potential productivity gains.

By carefully considering these factors, you can select a variator motor that is well-suited to the specific application, delivering optimal performance, energy efficiency, and reliability.

variator motor

What are the key components and technologies used in modern variator motors?

Modern variator motors incorporate several key components and technologies to enable their variable speed and adjustable torque capabilities. Here’s a detailed explanation:

1. Motor Stator and Rotor: The motor stator and rotor are fundamental components of variator motors. The stator consists of a stationary set of windings that generate a rotating magnetic field when energized. The rotor, typically mounted on the motor shaft, contains conductive bars or coils that interact with the magnetic field and produce mechanical rotation.

2. Power Electronics: Variator motors rely on power electronics components, such as inverters or variable frequency drives (VFDs), to control the motor’s speed and torque. These devices convert the incoming AC power supply into the appropriate voltage and frequency required by the motor. Power electronics also enable smooth and precise adjustment of motor operating parameters, facilitating variable speed operation.

3. Sensors and Feedback Devices: Variator motors often incorporate sensors and feedback devices to monitor motor performance and provide input for control algorithms. Common sensors used include speed sensors, position sensors, temperature sensors, and current sensors. These sensors provide real-time information about the motor’s operating conditions, allowing the control system to adjust motor parameters accordingly.

4. Control Algorithms and Software: Modern variator motors employ sophisticated control algorithms and software to regulate motor speed, torque, and other operating parameters. These algorithms process the sensor data and generate control signals to adjust the power electronics and optimize motor performance. Advanced control techniques, such as field-oriented control (FOC) or model predictive control (MPC), may be used to achieve precise and efficient motor operation.

5. Variable Speed Drive Mechanisms: Variator motors employ various mechanisms to achieve variable speed operation. These mechanisms can include adjustable pulley systems, belt drives, gearboxes, or electronic control of motor winding configurations. The specific mechanism depends on the motor’s design and application requirements.

6. Efficiency-Enhancing Technologies: Modern variator motors incorporate technologies aimed at improving energy efficiency and reducing losses. These technologies may include the use of high-efficiency motor designs, such as permanent magnet motors or synchronous reluctance motors. Additionally, advanced insulation materials, optimized motor cooling systems, and reduced friction bearings can contribute to enhanced motor efficiency.

7. Communication and Networking: Some variator motors feature communication and networking capabilities to enable integration with industrial automation systems or the Internet of Things (IoT). These capabilities facilitate remote monitoring, control, and data exchange, allowing for enhanced motor performance analysis, predictive maintenance, and system integration.

8. Safety and Protection Features: Modern variator motors incorporate safety and protection features to safeguard the motor and the surrounding equipment. These features may include overcurrent protection, overvoltage protection, short-circuit protection, thermal protection, and fault detection mechanisms. These measures ensure safe and reliable operation and help prevent damage to the motor in case of abnormal operating conditions.

The specific components and technologies used in variator motors can vary depending on the motor’s type, design, and application requirements. Motor manufacturers continuously innovate and incorporate advancements in materials, electronics, and control systems to improve motor performance, efficiency, and reliability.

variator motor

Can you explain the principle behind the variable speed control in variator motors?

The variable speed control in variator motors is achieved through various mechanisms depending on the specific type of variator motor. Here, we’ll explore a few common principles behind variable speed control:

  • Adjustable Transmission Systems: Many variator motors utilize adjustable transmission systems to achieve variable speed control. One common example is the use of variable frequency drives (VFDs) in electric motors. VFDs facilitate speed control by adjusting the frequency of the electrical power supplied to the motor. By modifying the frequency, the VFD can change the rotational speed of the motor. Another example is the use of mechanical gearboxes with different gear ratios. By selecting different gears, the input speed can be converted to various output speeds, allowing for speed control.
  • Electronic Control Systems: Some variator motors employ electronic control systems to achieve variable speed control. These control systems typically consist of microprocessors, sensors, and feedback mechanisms. The motor speed is adjusted based on input signals or commands received by the control system. The control system then modulates the power supplied to the motor to achieve the desired speed. This approach is often used in applications where precise speed control and automation are required.
  • Hydraulic Control Systems: In hydraulic variator motors, speed control is achieved through hydraulic control systems. These systems use hydraulic pumps, valves, and actuators to adjust the motor speed. By controlling the flow rate and pressure of the hydraulic fluid, the speed of the motor can be modulated. Hydraulic variator motors are commonly used in applications where high torque and ruggedness are required, such as heavy machinery and construction equipment.

Regardless of the specific mechanism used, the principle behind variable speed control in variator motors involves adjusting the input power, transmission, or control system to modify the rotational speed of the motor. This flexibility in controlling the speed allows for precise matching of the motor’s output to the requirements of the application, resulting in improved efficiency, reduced energy consumption, and enhanced performance.

China manufacturer Right Angle Commutator Precision Planetary Reducer Stepper Servo Motor   vacuum pump oil	China manufacturer Right Angle Commutator Precision Planetary Reducer Stepper Servo Motor   vacuum pump oil
editor by CX 2023-12-15

China best 120mm Precision Planetary Gear Reducer 1.5kw Servo Motor vacuum pump adapter

Product Description

Product Description

120mm Precision Planetary Gear Reducer 1.5kw Servo Motor  is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.
120mm Precision Planetary Gear Reducer 1.5kw Servo Motor  is often used in the field of precision motion control to meet the application requirements of high torque, high torsional rigidity and low backbacklash. The planetary reducer is also called helical gear reducer, the internal use of carbon chromium molybdenum alloy steel helical gear, hardness 860HV. This also makes the gear set of the reducer very strong and stable, the thickness of the gear distributes the load acting on the gear. Large span bearing groups provide a stable structure. The precise gear sets are closely engaged, so that the load is distributed across the planetary gears to withstand the torque load. In this design, the Fubao planetary high precision reducer, helical gear reducer to run at the best speed to achieve better results, reduce the moment of inertia of the load, so as to increase the stability of equipment.

Product Parameters

 

WPG/WPGL series parameters Model number WPG/WPGL60 WPG/WPGL80 WPG/WPGL90 WPG/WPGL160
Rated output torque 15~39Nm 50~100Nm 50~100Nm 160~600Nm
Reduction ratio L1: 4, 5, 7, 10  L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100
Planetary gear backlash L1: ≤10  L2: ≤12

Detailed Photos

Fubao High precision planetary reducer with the following advantages:

1, compact structure: the characteristics of large torque planetary reducer is to make full use of space, limited space design bearing and gear ratio, so that the product is smaller than the traditional reducer volume can save space.
 

2, high efficiency: the planetary gear group will be in a completely tight meshing state when running, reducing gear collision or local meshing resulting in gear damage. The completely tight meshing characteristic makes the efficiency loss of each gear transmission only 3%. This type of transmission mode can ensure that the kinetic energy input reducer to the mechanical end of the process, still can maintain high transmission efficiency, avoid the internal gear friction, sliding, mechanical loss.
 

3, high axial and radial load capacity: the output shaft of Fubao technology’s high-torque planetary reducer adopts a large-span style, so that the bearing is configured at both ends of the output shaft. The design can effectively disperse the force acting on the output shaft and reduce the load of the bearing. In other words, the product strengthens the bearing and radial load capacity under the same size.
 

4, high strength: large torque planetary reducer gear group is very strong and stable, the thickness of the gear dispersed the load on the gear. The large span bearing group provides a stable structure, and the precision gear group allows the load to be distributed to each planetary gear under tight meshing to withstand the torque load.
 

5, high stability: precision processing to ensure that the product coaxial and concentric, coupled with bearing large span design, so that large torque planetary reducer with excellent stability.

Product Details

Other products

 

Company Profile

 

Factory Display

FAQ

Q: Speed reducer grease replacement time 

A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time 
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection 
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer 
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Application: Motor, Machinery, Agricultural Machinery, CNC Machine Toolmechanical Equipment
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

variator motor

What factors should be considered when selecting a variator motor for a specific application?

When selecting a variator motor for a specific application, several factors should be considered to ensure optimal performance and compatibility. Here are some key factors to take into account:

  • Load Characteristics: Consider the specific characteristics of the load the motor will be driving. This includes factors such as the torque requirements, speed range, and variations in load demand. Understanding the load characteristics helps in selecting a variator motor with the appropriate power and speed capabilities to meet the application’s requirements.
  • Speed Range: Determine the required speed range for the application. Variator motors offer the advantage of adjustable speed control, but different models may have different speed ranges. Ensure that the selected variator motor can operate within the desired speed range to meet the application’s needs.
  • Power Rating: Consider the power rating required by the application. This involves assessing the motor’s ability to deliver the necessary torque and power output to drive the load effectively. It’s important to select a variator motor that can handle the power requirements of the application without operating at its maximum capacity continuously.
  • Environmental Conditions: Evaluate the environmental conditions in which the variator motor will operate. Factors such as temperature, humidity, dust, vibrations, and corrosive substances can impact motor performance and longevity. Choose a variator motor that is designed to withstand the specific environmental conditions of the application, such as motors with appropriate protection ratings or specialized coatings.
  • Efficiency and Energy Savings: Consider the desired energy efficiency of the system. Variator motors can offer energy savings through adjustable speed control, but efficiency levels can vary between models. Look for motors with high efficiency ratings, such as those meeting energy efficiency standards like IE3 or IE4, to optimize energy consumption and reduce operating costs.
  • Control and Integration Requirements: Assess the control and integration needs of the application. Determine whether the variator motor requires specific control interfaces or communication protocols to integrate with the automation system effectively. Consider compatibility with existing control systems, such as programmable logic controllers (PLCs) or industrial communication networks, to ensure seamless integration and ease of operation.
  • Reliability and Maintenance: Evaluate the reliability and maintenance requirements of the variator motor. Consider factors such as the expected lifespan, durability of components, availability of spare parts, and ease of maintenance. Choosing a motor from a reputable manufacturer with a track record of reliable products and good customer support can help ensure long-term performance and minimize downtime.
  • Cost Considerations: Finally, consider the cost of the variator motor, including the initial purchase cost as well as long-term operating costs. While it’s important to find a motor that meets the application’s requirements, it’s also essential to consider the overall cost-effectiveness and return on investment. This includes factors such as energy savings, maintenance costs, and potential productivity gains.

By carefully considering these factors, you can select a variator motor that is well-suited to the specific application, delivering optimal performance, energy efficiency, and reliability.

variator motor

What resources are available for further learning about the principles and applications of variator motors?

There are several resources available for further learning about the principles and applications of variator motors. Here’s a detailed explanation:

1. Books and Publications: Numerous books and publications cover the principles, design, and applications of variator motors. Some recommended titles include “Variable Speed AC Drives with Inverter Output Filters” by Jaroslaw Guzinski and Haitham Abu-Rub, “Electric Motors and Drives: Fundamentals, Types, and Applications” by Austin Hughes and Bill Drury, and “Variable Frequency Drives: Installation and Troubleshooting” by Glen A. Mazur. These resources provide in-depth knowledge on variator motor technology, control strategies, and practical implementation.

2. Online Courses and Tutorials: Online learning platforms like Udemy, Coursera, and edX offer courses and tutorials on electric motors, motor control, and power electronics. These courses cover variator motor principles, operation, and applications, providing a structured learning experience with video lectures, quizzes, and assignments. Some courses are specifically focused on variable frequency drives (VFDs) and their applications.

3. Technical Documentation and Application Notes: Manufacturers of variator motors and associated equipment often provide technical documentation, application notes, and white papers that delve into the principles and applications of variator motors. These resources can be found on the manufacturers’ websites and offer valuable insights into motor selection, installation, and operation.

4. Professional Journals and Research Papers: Academic and professional journals in the fields of electrical engineering, power electronics, and industrial automation publish research papers and articles on variator motors. IEEE Transactions on Industrial Electronics, IEEE Industry Applications Magazine, and International Journal of Electrical Power & Energy Systems are some examples of publications that cover topics related to variator motors. Access to these resources may require subscriptions or membership in relevant professional organizations.

5. Webinars and Online Presentations: Webinars and online presentations hosted by motor manufacturers, industry associations, or technology companies can provide valuable insights into the principles and applications of variator motors. These events often feature subject matter experts who share their knowledge, discuss case studies, and answer questions from participants. Recordings of past webinars are sometimes made available for on-demand viewing.

6. Industry Forums and Discussion Groups: Online forums and discussion groups focused on electrical engineering, motor control, or industrial automation can be valuable resources for learning about variator motors. Platforms like Electrical Engineering Stack Exchange, Control.com, and LinkedIn groups dedicated to motor control offer opportunities to ask questions, engage in discussions, and learn from the experiences of industry professionals.

7. Manufacturer Training Programs: Some variator motor manufacturers offer training programs and workshops that cover the principles, operation, and applications of their products. These programs may include hands-on exercises, demonstrations, and technical support. Contacting the manufacturers directly or checking their websites can provide information on available training opportunities.

When exploring these resources, it’s important to consider the credibility of the source, relevance to specific applications, and the date of publication to ensure the information aligns with the latest advancements in variator motor technology.

By utilizing these resources, individuals can deepen their understanding of variator motors and enhance their knowledge of the principles and applications associated with this technology.

variator motor

Can you explain the principle behind the variable speed control in variator motors?

The variable speed control in variator motors is achieved through various mechanisms depending on the specific type of variator motor. Here, we’ll explore a few common principles behind variable speed control:

  • Adjustable Transmission Systems: Many variator motors utilize adjustable transmission systems to achieve variable speed control. One common example is the use of variable frequency drives (VFDs) in electric motors. VFDs facilitate speed control by adjusting the frequency of the electrical power supplied to the motor. By modifying the frequency, the VFD can change the rotational speed of the motor. Another example is the use of mechanical gearboxes with different gear ratios. By selecting different gears, the input speed can be converted to various output speeds, allowing for speed control.
  • Electronic Control Systems: Some variator motors employ electronic control systems to achieve variable speed control. These control systems typically consist of microprocessors, sensors, and feedback mechanisms. The motor speed is adjusted based on input signals or commands received by the control system. The control system then modulates the power supplied to the motor to achieve the desired speed. This approach is often used in applications where precise speed control and automation are required.
  • Hydraulic Control Systems: In hydraulic variator motors, speed control is achieved through hydraulic control systems. These systems use hydraulic pumps, valves, and actuators to adjust the motor speed. By controlling the flow rate and pressure of the hydraulic fluid, the speed of the motor can be modulated. Hydraulic variator motors are commonly used in applications where high torque and ruggedness are required, such as heavy machinery and construction equipment.

Regardless of the specific mechanism used, the principle behind variable speed control in variator motors involves adjusting the input power, transmission, or control system to modify the rotational speed of the motor. This flexibility in controlling the speed allows for precise matching of the motor’s output to the requirements of the application, resulting in improved efficiency, reduced energy consumption, and enhanced performance.

China best 120mm Precision Planetary Gear Reducer 1.5kw Servo Motor   vacuum pump adapter	China best 120mm Precision Planetary Gear Reducer 1.5kw Servo Motor   vacuum pump adapter
editor by CX 2023-12-12

China 2500PPR Large High Torque 24V 400W Brushless DC Servo Motors with Precision Planetary Gear Reducer Brushless DC Motor with Hot selling

Solution Description

 Custom Substantial Torque 24V DC Planetary Gear Robotic Motor 24V BLDC Motor with Corridor Encoder
 
Product Number:KY80AS5714-15PGL60-ten
Utilization:Boat, Car, Admirer
Certification:CE
Sort:Servo Motor
Torque:22N.M
Building:Long term Magnet
Commutation:Brushless
Safeguard Characteristic:Drip-evidence
Speed(RPM):150r/min
Steady Current(A):22A
Output Energy:400W
Voltage(V):24VDC
Performance:IE 1
Software:robotic
Item Name:24v bldc motor with corridor encoder
Motor type:BLDC MOTOR
Keywords and phrases:SERVO MOTOR
Rated Voltage:24VDC
Color:Black
Diameter:80MM
Energy:400W
Rated speed:1500 ten%rpm
MOTOR TORQUE:2.55N.M

Item Description

 

Product Attributes:
*Large Torque to inertia ratio&up to 15000Nm/kgm²
*Quickly dynamic reaction *time consistent <20ms
*Broad velocity altering&feedback up to a thousand:one
*Continual pace precision up to .5%
*Substantial overload,2Mn/30s,3.5N.m/10s
*Small volume and light-weight
*Silent,the least expensive sound is only 45dB(A)
*Protected with IP65,Course F insulation
Market course
1.The altitude should be more than 1000 meters earlier mentioned sea degree
2.Atmosphere temperature:+5ºC~+40ºC
three.The thirty day period average tallest relative humidity is ninety%,at the same the thirty day period common lowest temperature is significantly less than 25ºC.

Parameters

 

Product

Volt

Power

Rated Torque

Rated Speed

Rated Present

Peak Torque

Encoder

Weight

Unit

V

W

Nm

r/min

A

Nm

P/R

kg

KY60AS5711-thirty

24

one hundred

.318

3000

five.four

.95

2500

one.5

KY80AS5712-fifteen

twelve

200

1.27

1500

22

three.eight

2500

2.two

KY80AS5712-fifteen

24/48

200

1.27

1500

nine.4

three.8

2500

2.2

KY80AS5714-fifteen

twelve

400

two.fifty five

1500

forty four

seven.65

2500

three.6

KY80AS5714-fifteen

24/48

400

two.fifty five

1500

21.3

seven.sixty five

2500

3.six

KY80AS5714-30

twelve

four hundred

1.27

3000

forty four

3.eight

2500

two.2

KY80AS5714-thirty

24/48

400

1.27

3000

eighteen.eight

three.eight

2500

2.two

KY110AS0405-15

forty eight

five hundred

3.one

1500

14

10.8

2500

six

KY110AS5717-fifteen

24

750

four.77

1500

41

sixteen.six

2500

six

KY110AS0408-fifteen

forty eight

800

5

1500

22

17.nine

2500

seven.8

KY110AS5710-15

24

one thousand

6.three

1500

fifty five

21.four

2500

seven.8

KY110AS571-fifteen

forty eight

a thousand

six.three

1500

28

22

2500

seven.8

KY110AS 0571 -twelve

forty eight

1200

four.5

2500

33

fifteen.seven

2500

seven.8

KY110AS571-fifteen

48

1500

9.5

1500

37.5

28

2500

ten

KY110AS0420-twenty five

forty eight

2000

seven.six

2500

55

26

2500

10

KY130AS0430-fifteen

forty eight

3000

19

1500

73

fifty seven

2500

14

Gear ratio 1:7.5 one:10 one:fifteen one:20 1:25 1:30 1:forty one:fifty 1:sixty

 

 

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Industrial
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 285/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model

Volt

Power

Rated Torque

Rated Speed

Rated Current

Peak Torque

Encoder

Weight

Unit

V

W

Nm

r/min

A

Nm

P/R

kg

KY60AS0201-30

24

100

0.318

3000

5.4

0.95

2500

1.5

KY80AS0102-15

12

200

1.27

1500

22

3.8

2500

2.2

KY80AS0202-15

24/48

200

1.27

1500

9.4

3.8

2500

2.2

KY80AS0104-15

12

400

2.55

1500

44

7.65

2500

3.6

KY80AS0204-15

24/48

400

2.55

1500

21.3

7.65

2500

3.6

KY80AS0104-30

12

400

1.27

3000

44

3.8

2500

2.2

KY80AS0204-30

24/48

400

1.27

3000

18.8

3.8

2500

2.2

KY110AS0405-15

48

500

3.1

1500

14

10.8

2500

6

KY110AS0207-15

24

750

4.77

1500

41

16.6

2500

6

KY110AS0408-15

48

800

5

1500

22

17.9

2500

7.8

KY110AS0210-15

24

1000

6.3

1500

55

21.4

2500

7.8

KY110AS0410-15

48

1000

6.3

1500

28

22

2500

7.8

KY110AS0412-12

48

1200

4.5

2500

33

15.7

2500

7.8

KY110AS0415-15

48

1500

9.5

1500

37.5

28

2500

10

KY110AS0420-25

48

2000

7.6

2500

55

26

2500

10

KY130AS0430-15

48

3000

19

1500

73

57

2500

14

###

Gear ratio 1:7.5 1:10 1:15 1:20 1:25 1:30 1:40 1:50 1:60
To Be Negotiated 1 Piece
(Min. Order)

###

Application: Industrial
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 285/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model

Volt

Power

Rated Torque

Rated Speed

Rated Current

Peak Torque

Encoder

Weight

Unit

V

W

Nm

r/min

A

Nm

P/R

kg

KY60AS0201-30

24

100

0.318

3000

5.4

0.95

2500

1.5

KY80AS0102-15

12

200

1.27

1500

22

3.8

2500

2.2

KY80AS0202-15

24/48

200

1.27

1500

9.4

3.8

2500

2.2

KY80AS0104-15

12

400

2.55

1500

44

7.65

2500

3.6

KY80AS0204-15

24/48

400

2.55

1500

21.3

7.65

2500

3.6

KY80AS0104-30

12

400

1.27

3000

44

3.8

2500

2.2

KY80AS0204-30

24/48

400

1.27

3000

18.8

3.8

2500

2.2

KY110AS0405-15

48

500

3.1

1500

14

10.8

2500

6

KY110AS0207-15

24

750

4.77

1500

41

16.6

2500

6

KY110AS0408-15

48

800

5

1500

22

17.9

2500

7.8

KY110AS0210-15

24

1000

6.3

1500

55

21.4

2500

7.8

KY110AS0410-15

48

1000

6.3

1500

28

22

2500

7.8

KY110AS0412-12

48

1200

4.5

2500

33

15.7

2500

7.8

KY110AS0415-15

48

1500

9.5

1500

37.5

28

2500

10

KY110AS0420-25

48

2000

7.6

2500

55

26

2500

10

KY130AS0430-15

48

3000

19

1500

73

57

2500

14

###

Gear ratio 1:7.5 1:10 1:15 1:20 1:25 1:30 1:40 1:50 1:60

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China 2500PPR Large High Torque 24V 400W Brushless DC Servo Motors with Precision Planetary Gear Reducer Brushless DC Motor     with Hot selling	China 2500PPR Large High Torque 24V 400W Brushless DC Servo Motors with Precision Planetary Gear Reducer Brushless DC Motor     with Hot selling
editor by czh 2022-12-14