Tag Archives: servo gear motor

China best 120mm Precision Planetary Gear Reducer 1.5kw Servo Motor vacuum pump adapter

Product Description

Product Description

120mm Precision Planetary Gear Reducer 1.5kw Servo Motor  is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.
120mm Precision Planetary Gear Reducer 1.5kw Servo Motor  is often used in the field of precision motion control to meet the application requirements of high torque, high torsional rigidity and low backbacklash. The planetary reducer is also called helical gear reducer, the internal use of carbon chromium molybdenum alloy steel helical gear, hardness 860HV. This also makes the gear set of the reducer very strong and stable, the thickness of the gear distributes the load acting on the gear. Large span bearing groups provide a stable structure. The precise gear sets are closely engaged, so that the load is distributed across the planetary gears to withstand the torque load. In this design, the Fubao planetary high precision reducer, helical gear reducer to run at the best speed to achieve better results, reduce the moment of inertia of the load, so as to increase the stability of equipment.

Product Parameters

 

WPG/WPGL series parameters Model number WPG/WPGL60 WPG/WPGL80 WPG/WPGL90 WPG/WPGL160
Rated output torque 15~39Nm 50~100Nm 50~100Nm 160~600Nm
Reduction ratio L1: 4, 5, 7, 10  L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100
Planetary gear backlash L1: ≤10  L2: ≤12

Detailed Photos

Fubao High precision planetary reducer with the following advantages:

1, compact structure: the characteristics of large torque planetary reducer is to make full use of space, limited space design bearing and gear ratio, so that the product is smaller than the traditional reducer volume can save space.
 

2, high efficiency: the planetary gear group will be in a completely tight meshing state when running, reducing gear collision or local meshing resulting in gear damage. The completely tight meshing characteristic makes the efficiency loss of each gear transmission only 3%. This type of transmission mode can ensure that the kinetic energy input reducer to the mechanical end of the process, still can maintain high transmission efficiency, avoid the internal gear friction, sliding, mechanical loss.
 

3, high axial and radial load capacity: the output shaft of Fubao technology’s high-torque planetary reducer adopts a large-span style, so that the bearing is configured at both ends of the output shaft. The design can effectively disperse the force acting on the output shaft and reduce the load of the bearing. In other words, the product strengthens the bearing and radial load capacity under the same size.
 

4, high strength: large torque planetary reducer gear group is very strong and stable, the thickness of the gear dispersed the load on the gear. The large span bearing group provides a stable structure, and the precision gear group allows the load to be distributed to each planetary gear under tight meshing to withstand the torque load.
 

5, high stability: precision processing to ensure that the product coaxial and concentric, coupled with bearing large span design, so that large torque planetary reducer with excellent stability.

Product Details

Other products

 

Company Profile

 

Factory Display

FAQ

Q: Speed reducer grease replacement time 

A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time 
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection 
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer 
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Application: Motor, Machinery, Agricultural Machinery, CNC Machine Toolmechanical Equipment
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

variator motor

What factors should be considered when selecting a variator motor for a specific application?

When selecting a variator motor for a specific application, several factors should be considered to ensure optimal performance and compatibility. Here are some key factors to take into account:

  • Load Characteristics: Consider the specific characteristics of the load the motor will be driving. This includes factors such as the torque requirements, speed range, and variations in load demand. Understanding the load characteristics helps in selecting a variator motor with the appropriate power and speed capabilities to meet the application’s requirements.
  • Speed Range: Determine the required speed range for the application. Variator motors offer the advantage of adjustable speed control, but different models may have different speed ranges. Ensure that the selected variator motor can operate within the desired speed range to meet the application’s needs.
  • Power Rating: Consider the power rating required by the application. This involves assessing the motor’s ability to deliver the necessary torque and power output to drive the load effectively. It’s important to select a variator motor that can handle the power requirements of the application without operating at its maximum capacity continuously.
  • Environmental Conditions: Evaluate the environmental conditions in which the variator motor will operate. Factors such as temperature, humidity, dust, vibrations, and corrosive substances can impact motor performance and longevity. Choose a variator motor that is designed to withstand the specific environmental conditions of the application, such as motors with appropriate protection ratings or specialized coatings.
  • Efficiency and Energy Savings: Consider the desired energy efficiency of the system. Variator motors can offer energy savings through adjustable speed control, but efficiency levels can vary between models. Look for motors with high efficiency ratings, such as those meeting energy efficiency standards like IE3 or IE4, to optimize energy consumption and reduce operating costs.
  • Control and Integration Requirements: Assess the control and integration needs of the application. Determine whether the variator motor requires specific control interfaces or communication protocols to integrate with the automation system effectively. Consider compatibility with existing control systems, such as programmable logic controllers (PLCs) or industrial communication networks, to ensure seamless integration and ease of operation.
  • Reliability and Maintenance: Evaluate the reliability and maintenance requirements of the variator motor. Consider factors such as the expected lifespan, durability of components, availability of spare parts, and ease of maintenance. Choosing a motor from a reputable manufacturer with a track record of reliable products and good customer support can help ensure long-term performance and minimize downtime.
  • Cost Considerations: Finally, consider the cost of the variator motor, including the initial purchase cost as well as long-term operating costs. While it’s important to find a motor that meets the application’s requirements, it’s also essential to consider the overall cost-effectiveness and return on investment. This includes factors such as energy savings, maintenance costs, and potential productivity gains.

By carefully considering these factors, you can select a variator motor that is well-suited to the specific application, delivering optimal performance, energy efficiency, and reliability.

variator motor

What resources are available for further learning about the principles and applications of variator motors?

There are several resources available for further learning about the principles and applications of variator motors. Here’s a detailed explanation:

1. Books and Publications: Numerous books and publications cover the principles, design, and applications of variator motors. Some recommended titles include “Variable Speed AC Drives with Inverter Output Filters” by Jaroslaw Guzinski and Haitham Abu-Rub, “Electric Motors and Drives: Fundamentals, Types, and Applications” by Austin Hughes and Bill Drury, and “Variable Frequency Drives: Installation and Troubleshooting” by Glen A. Mazur. These resources provide in-depth knowledge on variator motor technology, control strategies, and practical implementation.

2. Online Courses and Tutorials: Online learning platforms like Udemy, Coursera, and edX offer courses and tutorials on electric motors, motor control, and power electronics. These courses cover variator motor principles, operation, and applications, providing a structured learning experience with video lectures, quizzes, and assignments. Some courses are specifically focused on variable frequency drives (VFDs) and their applications.

3. Technical Documentation and Application Notes: Manufacturers of variator motors and associated equipment often provide technical documentation, application notes, and white papers that delve into the principles and applications of variator motors. These resources can be found on the manufacturers’ websites and offer valuable insights into motor selection, installation, and operation.

4. Professional Journals and Research Papers: Academic and professional journals in the fields of electrical engineering, power electronics, and industrial automation publish research papers and articles on variator motors. IEEE Transactions on Industrial Electronics, IEEE Industry Applications Magazine, and International Journal of Electrical Power & Energy Systems are some examples of publications that cover topics related to variator motors. Access to these resources may require subscriptions or membership in relevant professional organizations.

5. Webinars and Online Presentations: Webinars and online presentations hosted by motor manufacturers, industry associations, or technology companies can provide valuable insights into the principles and applications of variator motors. These events often feature subject matter experts who share their knowledge, discuss case studies, and answer questions from participants. Recordings of past webinars are sometimes made available for on-demand viewing.

6. Industry Forums and Discussion Groups: Online forums and discussion groups focused on electrical engineering, motor control, or industrial automation can be valuable resources for learning about variator motors. Platforms like Electrical Engineering Stack Exchange, Control.com, and LinkedIn groups dedicated to motor control offer opportunities to ask questions, engage in discussions, and learn from the experiences of industry professionals.

7. Manufacturer Training Programs: Some variator motor manufacturers offer training programs and workshops that cover the principles, operation, and applications of their products. These programs may include hands-on exercises, demonstrations, and technical support. Contacting the manufacturers directly or checking their websites can provide information on available training opportunities.

When exploring these resources, it’s important to consider the credibility of the source, relevance to specific applications, and the date of publication to ensure the information aligns with the latest advancements in variator motor technology.

By utilizing these resources, individuals can deepen their understanding of variator motors and enhance their knowledge of the principles and applications associated with this technology.

variator motor

Can you explain the principle behind the variable speed control in variator motors?

The variable speed control in variator motors is achieved through various mechanisms depending on the specific type of variator motor. Here, we’ll explore a few common principles behind variable speed control:

  • Adjustable Transmission Systems: Many variator motors utilize adjustable transmission systems to achieve variable speed control. One common example is the use of variable frequency drives (VFDs) in electric motors. VFDs facilitate speed control by adjusting the frequency of the electrical power supplied to the motor. By modifying the frequency, the VFD can change the rotational speed of the motor. Another example is the use of mechanical gearboxes with different gear ratios. By selecting different gears, the input speed can be converted to various output speeds, allowing for speed control.
  • Electronic Control Systems: Some variator motors employ electronic control systems to achieve variable speed control. These control systems typically consist of microprocessors, sensors, and feedback mechanisms. The motor speed is adjusted based on input signals or commands received by the control system. The control system then modulates the power supplied to the motor to achieve the desired speed. This approach is often used in applications where precise speed control and automation are required.
  • Hydraulic Control Systems: In hydraulic variator motors, speed control is achieved through hydraulic control systems. These systems use hydraulic pumps, valves, and actuators to adjust the motor speed. By controlling the flow rate and pressure of the hydraulic fluid, the speed of the motor can be modulated. Hydraulic variator motors are commonly used in applications where high torque and ruggedness are required, such as heavy machinery and construction equipment.

Regardless of the specific mechanism used, the principle behind variable speed control in variator motors involves adjusting the input power, transmission, or control system to modify the rotational speed of the motor. This flexibility in controlling the speed allows for precise matching of the motor’s output to the requirements of the application, resulting in improved efficiency, reduced energy consumption, and enhanced performance.

China best 120mm Precision Planetary Gear Reducer 1.5kw Servo Motor   vacuum pump adapter	China best 120mm Precision Planetary Gear Reducer 1.5kw Servo Motor   vacuum pump adapter
editor by CX 2023-12-12

China Hot selling 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Pump Fan Chain Grinder motor engine

Product Description

 

Product Description

 

model Number of poles Phase Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 0.192 0.16 50 0.48

 

model Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation weight
Units A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 0.05 3.947 14.6 134 24~48 1000~3000 1.0 

Product Parameters

Quiet stable and reliable for long life operation

1.Voltage: 24 VDC
2.Number of phases: 3
3.Number of levels: 4
4.Line-to-line resistance: 1.45±10%ohms
5.Line-to-line inductance: 1.27±20%mH
6.Rated current: 3.2A
7.Rated power: 50W
8.No-load speed: 4300 rpm
9.Insulation class: B
10.Reduction ratio: 1:58.22
11.Output torque: 7.5 N.m
12.Output speed: 51.5 rpm
13.We can design the special voltage and shaft and so on

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8
Samples:
US$ 162/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China Hot selling 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Pump Fan Chain Grinder   motor engine	China Hot selling 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Pump Fan Chain Grinder   motor engine
editor by CX 2023-06-05

China 2500PPR Large High Torque 24V 400W Brushless DC Servo Motors with Precision Planetary Gear Reducer Brushless DC Motor with Hot selling

Solution Description

 Custom Substantial Torque 24V DC Planetary Gear Robotic Motor 24V BLDC Motor with Corridor Encoder
 
Product Number:KY80AS5714-15PGL60-ten
Utilization:Boat, Car, Admirer
Certification:CE
Sort:Servo Motor
Torque:22N.M
Building:Long term Magnet
Commutation:Brushless
Safeguard Characteristic:Drip-evidence
Speed(RPM):150r/min
Steady Current(A):22A
Output Energy:400W
Voltage(V):24VDC
Performance:IE 1
Software:robotic
Item Name:24v bldc motor with corridor encoder
Motor type:BLDC MOTOR
Keywords and phrases:SERVO MOTOR
Rated Voltage:24VDC
Color:Black
Diameter:80MM
Energy:400W
Rated speed:1500 ten%rpm
MOTOR TORQUE:2.55N.M

Item Description

 

Product Attributes:
*Large Torque to inertia ratio&up to 15000Nm/kgm²
*Quickly dynamic reaction *time consistent <20ms
*Broad velocity altering&feedback up to a thousand:one
*Continual pace precision up to .5%
*Substantial overload,2Mn/30s,3.5N.m/10s
*Small volume and light-weight
*Silent,the least expensive sound is only 45dB(A)
*Protected with IP65,Course F insulation
Market course
1.The altitude should be more than 1000 meters earlier mentioned sea degree
2.Atmosphere temperature:+5ºC~+40ºC
three.The thirty day period average tallest relative humidity is ninety%,at the same the thirty day period common lowest temperature is significantly less than 25ºC.

Parameters

 

Product

Volt

Power

Rated Torque

Rated Speed

Rated Present

Peak Torque

Encoder

Weight

Unit

V

W

Nm

r/min

A

Nm

P/R

kg

KY60AS5711-thirty

24

one hundred

.318

3000

five.four

.95

2500

one.5

KY80AS5712-fifteen

twelve

200

1.27

1500

22

three.eight

2500

2.two

KY80AS5712-fifteen

24/48

200

1.27

1500

nine.4

three.8

2500

2.2

KY80AS5714-fifteen

twelve

400

two.fifty five

1500

forty four

seven.65

2500

three.6

KY80AS5714-fifteen

24/48

400

two.fifty five

1500

21.3

seven.sixty five

2500

3.six

KY80AS5714-30

twelve

four hundred

1.27

3000

forty four

3.eight

2500

two.2

KY80AS5714-thirty

24/48

400

1.27

3000

eighteen.eight

three.eight

2500

2.two

KY110AS0405-15

forty eight

five hundred

3.one

1500

14

10.8

2500

six

KY110AS5717-fifteen

24

750

four.77

1500

41

sixteen.six

2500

six

KY110AS0408-fifteen

forty eight

800

5

1500

22

17.nine

2500

seven.8

KY110AS5710-15

24

one thousand

6.three

1500

fifty five

21.four

2500

seven.8

KY110AS571-fifteen

forty eight

a thousand

six.three

1500

28

22

2500

seven.8

KY110AS 0571 -twelve

forty eight

1200

four.5

2500

33

fifteen.seven

2500

seven.8

KY110AS571-fifteen

48

1500

9.5

1500

37.5

28

2500

ten

KY110AS0420-twenty five

forty eight

2000

seven.six

2500

55

26

2500

10

KY130AS0430-fifteen

forty eight

3000

19

1500

73

fifty seven

2500

14

Gear ratio 1:7.5 one:10 one:fifteen one:20 1:25 1:30 1:forty one:fifty 1:sixty

 

 

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Industrial
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 285/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model

Volt

Power

Rated Torque

Rated Speed

Rated Current

Peak Torque

Encoder

Weight

Unit

V

W

Nm

r/min

A

Nm

P/R

kg

KY60AS0201-30

24

100

0.318

3000

5.4

0.95

2500

1.5

KY80AS0102-15

12

200

1.27

1500

22

3.8

2500

2.2

KY80AS0202-15

24/48

200

1.27

1500

9.4

3.8

2500

2.2

KY80AS0104-15

12

400

2.55

1500

44

7.65

2500

3.6

KY80AS0204-15

24/48

400

2.55

1500

21.3

7.65

2500

3.6

KY80AS0104-30

12

400

1.27

3000

44

3.8

2500

2.2

KY80AS0204-30

24/48

400

1.27

3000

18.8

3.8

2500

2.2

KY110AS0405-15

48

500

3.1

1500

14

10.8

2500

6

KY110AS0207-15

24

750

4.77

1500

41

16.6

2500

6

KY110AS0408-15

48

800

5

1500

22

17.9

2500

7.8

KY110AS0210-15

24

1000

6.3

1500

55

21.4

2500

7.8

KY110AS0410-15

48

1000

6.3

1500

28

22

2500

7.8

KY110AS0412-12

48

1200

4.5

2500

33

15.7

2500

7.8

KY110AS0415-15

48

1500

9.5

1500

37.5

28

2500

10

KY110AS0420-25

48

2000

7.6

2500

55

26

2500

10

KY130AS0430-15

48

3000

19

1500

73

57

2500

14

###

Gear ratio 1:7.5 1:10 1:15 1:20 1:25 1:30 1:40 1:50 1:60
To Be Negotiated 1 Piece
(Min. Order)

###

Application: Industrial
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 285/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model

Volt

Power

Rated Torque

Rated Speed

Rated Current

Peak Torque

Encoder

Weight

Unit

V

W

Nm

r/min

A

Nm

P/R

kg

KY60AS0201-30

24

100

0.318

3000

5.4

0.95

2500

1.5

KY80AS0102-15

12

200

1.27

1500

22

3.8

2500

2.2

KY80AS0202-15

24/48

200

1.27

1500

9.4

3.8

2500

2.2

KY80AS0104-15

12

400

2.55

1500

44

7.65

2500

3.6

KY80AS0204-15

24/48

400

2.55

1500

21.3

7.65

2500

3.6

KY80AS0104-30

12

400

1.27

3000

44

3.8

2500

2.2

KY80AS0204-30

24/48

400

1.27

3000

18.8

3.8

2500

2.2

KY110AS0405-15

48

500

3.1

1500

14

10.8

2500

6

KY110AS0207-15

24

750

4.77

1500

41

16.6

2500

6

KY110AS0408-15

48

800

5

1500

22

17.9

2500

7.8

KY110AS0210-15

24

1000

6.3

1500

55

21.4

2500

7.8

KY110AS0410-15

48

1000

6.3

1500

28

22

2500

7.8

KY110AS0412-12

48

1200

4.5

2500

33

15.7

2500

7.8

KY110AS0415-15

48

1500

9.5

1500

37.5

28

2500

10

KY110AS0420-25

48

2000

7.6

2500

55

26

2500

10

KY130AS0430-15

48

3000

19

1500

73

57

2500

14

###

Gear ratio 1:7.5 1:10 1:15 1:20 1:25 1:30 1:40 1:50 1:60

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China 2500PPR Large High Torque 24V 400W Brushless DC Servo Motors with Precision Planetary Gear Reducer Brushless DC Motor     with Hot selling	China 2500PPR Large High Torque 24V 400W Brushless DC Servo Motors with Precision Planetary Gear Reducer Brushless DC Motor     with Hot selling
editor by czh 2022-12-14

China Siheng motor factory Ce Quality 380V 130mm AC Servo Motor 2.3kw 15nm Motor, Gear Motor, Stepper Motor for Lathe Machine with Hot selling

Warranty: 3months-1year
Model Number: 130SF-M15015+KB10
Type: SERVO MOTOR
Frequency: 50-60HZ
Phase: Single-phase
AC Voltage: 380V
Efficiency: Ie 3
Power: 2.3KW
Voltage: 380V
Encoder linear number: 2500 wires
Overload ability: 3times
Rated Torque(N.M): 15N.M
Peak Torque(N.M): 45N.M
Certificate: CE,ISO
Key words: servo motor with driver
Certification: ce, ISO
Packaging Details: Carton with Inner Foam Box,Pallet,OEM

Driver Details: Why Choose Us Get The Lowest Price or Sample Services Now Company Profile ZheJiang Siheng motor co., LTD.we have through ISO9001,and CE certificate,we are adhering to the “integrity-based, customer first, quality first, full participation, continuous improvement, the pursuit of excellence” .We promise the excellent quality, reasonable prices, value service, look forward to your guidance and sincere cooperation. Packing and Shipping FAQ 1. How can we know the product quality?
A1: We suggest you to order a sample. Also, you can send us email for detail photos for checking if you cannot get enough information in the product page.

2. How can we get your catalog?
A2: Please go to below website link to download it .-http:// /download.php

3. Can we have free sample?
A3: Yes sure, but please pay the shipping cost by youself.

4. Is this your final price? May i have the discount?
A4: Our price is the factory price, and if your quantity is larger, we will allow the discount for you.

5.Is there cheap shipping cost to import to our country?
A5: Yes, we have our regular shipping company, they have very good price.

6. Can we visit your factory?
A6: Yes welcome warmly. Our address is Floor 3,B building,No 388,Songhuang Road, Xihu (West Lake) Dis. District, ZheJiang City, China.

7.What is the Warranty for your products?
A7: One year warranty for all electronic products. If any quality problems on our side occured in this period, we will take on the shipping cost and replacement.

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China Siheng motor factory Ce Quality 380V 130mm AC Servo Motor 2.3kw 15nm Motor, Gear Motor, Stepper Motor for Lathe Machine     with Hot selling	China Siheng motor factory Ce Quality 380V 130mm AC Servo Motor 2.3kw 15nm Motor, Gear Motor, Stepper Motor for Lathe Machine     with Hot selling
editor by czh

China y2 series motorized auto car engine spare parts 12v 24v DC AC gear brushless Stepper servo synchronous electric motor motor electric

Warranty: 3 months
Model Number: Y2-62M2-4
Type: Asynchronous Motor
Frequency: 50Hz
Phase: Three-phase
Protect Feature: Waterproof
AC Voltage: 208-230 / 240 V
Efficiency: IE 4
Rated Power: 0.18kw
rated power: 0.24 hp
asynchronous speed (r/min): 1330
Efficiency (%): 60
power factor: 0.73
unloaded noise(mm/s): 52
locked rotor current rated current: 4.4
(locked rotor torque)/(rated torque): 2.1
Max torque/ rated torque: 2.2
Housing: Aluminum Housing Motor
Packaging Details: cartoon case
Port: ZheJiang /HangZhou

10 hp dc electric motorEver-Power electirc motor factory is 1 of the biggest reducer and geared motor manufacturer in China,main products range:Worm geared motors, Helical geared motors, Planetary geared motors, cyclo gear motor, servo gear motor + Y2 series motors, + Y series motors , + YD series multi-speed motors+ YS series motors, + YC YL series motors, + Y3 series motors+ YEJ motors, + Mortor components, + TYGZ synchronous motors+ TYBZ synchronous motors, + Servo motors, + Brushles dc motors+ Electirc Motor, + Rare-Earth-Permanent-Magnet motors(REPM MOTORS)Due to limitation of website, please kindly contact us for free catalog in case of need, do not hesitate to inquire us with item + QTY. You will win in your market with our high quality and lower cost products… Click here for the latest quotation!

for more sizes, please contact us.
Click Here for more types! Related Products Click the picture below to view more raleted products! Company Information FAQ

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China y2 series motorized auto car engine spare parts 12v 24v DC AC gear brushless Stepper servo synchronous electric motor     motor electric	China y2 series motorized auto car engine spare parts 12v 24v DC AC gear brushless Stepper servo synchronous electric motor     motor electric
editor by czh