Tag Archives: 12v dc motor gear

China Hot selling 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Pump Fan Chain Grinder motor engine

Product Description

 

Product Description

 

model Number of poles Phase Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 0.192 0.16 50 0.48

 

model Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation weight
Units A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 0.05 3.947 14.6 134 24~48 1000~3000 1.0 

Product Parameters

Quiet stable and reliable for long life operation

1.Voltage: 24 VDC
2.Number of phases: 3
3.Number of levels: 4
4.Line-to-line resistance: 1.45±10%ohms
5.Line-to-line inductance: 1.27±20%mH
6.Rated current: 3.2A
7.Rated power: 50W
8.No-load speed: 4300 rpm
9.Insulation class: B
10.Reduction ratio: 1:58.22
11.Output torque: 7.5 N.m
12.Output speed: 51.5 rpm
13.We can design the special voltage and shaft and so on

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8
Samples:
US$ 162/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China Hot selling 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Pump Fan Chain Grinder   motor engine	China Hot selling 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Pump Fan Chain Grinder   motor engine
editor by CX 2023-06-05

China Best Sales CZPT Pd016016-6 12V 24V 1250rpm 3kg. Cm High Torque High Speed Planetary Gearbox Brush DC Gear Motor for Smart Blender motor brushes

Product Description

16MM DC Planetary plastic dc Gear Motor
 

Product Description

above specifications just for reference and customizable according to requirements.

motor specifications:16mm motor
motors (optional) brushless dc motor,brushed dc motor,stepper motor,coreless motor
voltage(optional) 3-24v
input speed <=30000rpm
current 250mA max

performance Data:16mm Planetary plastic Gearbox brush motor / brushless motor / Stepper Motor / Coreless Motor
Model Rated Speed Max Speed Max Rated Torque Max Instant Torque Reduction Ratio Gearbox Length Overall Length
  rpm rpm gf.cm gf.cm   mm mm
PD016016-4 1875 7500 3000 6000 4 11.5 38.4
PD016016-6 1250 5000 3000 6000 6 11.5 38.4
PD016016-16 469 1875 3000 6000 16 14.8 41.7
PD016016-24 313 1250 3000 6000 24 14.8 41.7
PD016016-36 208 833 3000 6000 36 14.8 41.7
PD016016-64 117 469 3000 6000 64 18.1 45.0
PD016016-96 78 313 3000 6000 96 18.1 45.0
PD016016-144 52 208 3000 6000 144 18.1 45.0
PD016016-216 35 139 3000 6000 216 18.1 45.0
PD016016-256 29 117 3000 6000 256 21.4 48.3
PD016016-384 20 78 3000 6000 384 21.4 48.3
PD016016-576 13 52 3000 6000 576 21.4 48.3
PD016016-864 9 35 3000 6000 864 21.4 48.3
PD016016-1296 6 23 3000 6000 1296 21.4 48.3
* The above specifications are subject to change without prior notice. They are for reference only and can be customized as required.

Please let us know your requirements and we will provide you with micro transmission solutions.
 

Product details show:

 

Application

Smart wearable devices   watch,VR,AR,XR and etc.
Household application kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc.
communication equipment 5G base station,video conference,mobile phone and etc.
Office automation equipments   scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine,  screen, lifting socket,  display,notebook PC and etc.
Automotive products  conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc.
Toys and models  radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc.
Medical equipments  blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc.
Industrials   flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc.
Electric power tools  electric drill, screwdriver,garden tool and etc.
Precision instruments  optics instruments,automatic vending machine, wire-stripping machine and etc.
Personal care tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc.
Consumer electronics camera, mobile phone,digital camera, automatic retracting device,camcorder,  kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc.
robots educational robot, programming robot, medical robot, escort robot and etc.

Company Profile

HangZhou CZPT Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly. 

Workshop

Testing Equipment

1) Competitive Advantages

  • 1) Competitive Advantages
    19+year experience in manufacturing motor gearbox
    We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
    Competitive Price
    Product Performance: Low noise, High efficiency, Long lifespan
    Prompt Delivery: 15 working days after payment
    Small Orders Accepted

 2) Main Products

  • Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,

  • Customized worm and gear transmission machinery;
  • Precise electromechanical motion module;
  • Precise component and assembly of plastic and metal powder injection.

Our Services

  • ODM & OEM
  • Gearbox design and development
  • Related technology support
  • Micro drive gearbox custom solution

Packaging & Shipping

1) Packing Details

packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
Or according to client’s requirement.

2) Shipping Details

samples will be shipped within 10 days;
batch order leading time according to the actual situation.

Certifications

Certifications

We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and more…

FAQ

FAQ

1. Can you make the gearbox with custom specifications?
YES. We have design and development team, also a great term of engineers, each of them have
many work years experience.

2.Do you provide the samples?
YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.

3.What is your MOQ?
Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.

4. Do you have the item in stock?
I am sorry we donot have the item in stock, All products are made with orders.

5. Do you provide technology support?
YES. Our company have design and development team, we can provide technology support if you
need.

6.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide. 

7.How to pay the money?
We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.

8. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

9. Can I come to your company to visit?
YES, you can come to our company to visit at anytime, and welcome to visit our company.

10. How do contact us ?
Please send an inquiry

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Permanent Magnet
Function: Control, Driving
Casing Protection: Drip-Proof
Number of Poles: 4
Customization:
Available

|

Customized Request

Motor

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China Best Sales CZPT Pd016016-6 12V 24V 1250rpm 3kg. Cm High Torque High Speed Planetary Gearbox Brush DC Gear Motor for Smart Blender   motor brushesChina Best Sales CZPT Pd016016-6 12V 24V 1250rpm 3kg. Cm High Torque High Speed Planetary Gearbox Brush DC Gear Motor for Smart Blender   motor brushes
editor by CX 2023-06-01

China OEM Label Stripping 12V Electric Planetary DC Gear Motor ac motor

Product Description

Label stripping 12V electric planetary DC Gear motor

 

Product Description

Can be customized
12V plastic DC gear motor

Model Application Parameters Rated Torque of Gear Box Instant Torque of Gear Box Gear Ratio Gear Box Length
L1
Rated At No Load At Rated Load Overall Length
L
Voltage Speed Current Speed Current Torque
VDC rpm mA rpm mA gf.cm mN.m mm gf.cm gf.cm mm
ZWBPD032032-16 12.0 337 215 303 715 1229 121 78.2 25000 80000 16 35.7
ZWBPD032032-24 12.0 225 215 202 715 1843 181 25000 80000 24
ZWBPD032032-33 12.0 163 215 147 715 2534 249 20000 80000 33
ZWBPD032032-67 12.0 80 230 72 715 3392 333 88.2 25000 80000 67 45.7
ZWBPD032032-94 12.0 57 230 52 715 4759 467 25000 80000 94
ZWBPD032032-133 12.0 41 230 36 715 6733 660 25000 80000 133
ZWBPD032032-188 12.0 29 230 26 715 9518 933 20000 80000 188
ZWBPD032032-272 12.0 20 265 18 715 10328 1013 98.2 25000 80000 272 55.7
ZWBPD032032-383 12.0 14 265 13 715 14542 1426 25000 80000 383
ZWBPD032032-540 12.0 10 265 9 715 20503 2011 25000 80000 540
ZWBPD032032-763 12.0 7 265 6 715 25000 2452 25000 80000 763
ZWBPD032032-1076 12.0 5 265 5 715 20000 1961 20000 80000 1076

above specifications just for reference and customizable according to requirements.

Integrated Drive Control Module.

Please let us know your requirements and we will provide you with micro transmission solutions.

2D Drawing

Detailed Photos

Application

Smart wearable devices   watch,VR,AR,XR and etc.
Household application kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc.
communication equipment 5G base station,video conference,mobile phone and etc.
Office automation equipments   scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine,  screen, lifting socket,  display,notebook PC and etc.
Automotive products  conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc.
Toys and models  radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc.
Medical equipments  blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc.
Industrials   flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc.
Electric power tools  electric drill, screwdriver,garden tool and etc.
Precision instruments  optics instruments,automatic vending machine, wire-stripping machine and etc.
Personal care tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc.
Consumer electronics camera, mobile phone,digital camera, automatic retracting device,camcorder,  kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc.
robots educational robot, programming robot, medical robot, escort robot and etc.

 

Company Profile

HangZhou CZPT Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly. 

Workshop


Testing Equipment

1) Competitive Advantages

  • 1) Competitive Advantages
    19+year experience in manufacturing motor gearbox
    We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
    Competitive Price
    Product Performance: Low noise, High efficiency, Long lifespan
    Prompt Delivery: 15 working days after payment
    Small Orders Accepted

 2) Main Products

  • Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,

  • Customized worm and gear transmission machinery;
  • Precise electromechanical motion module;
  • Precise component and assembly of plastic and metal powder injection.

 

Our Services

  • ODM & OEM
  • Gearbox design and development
  • Related technology support
  • Micro drive gearbox custom solution

Packaging & Shipping

1) Packing Details

packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
Or according to client’s requirement.

2) Shipping Details

samples will be shipped within 10 days;
batch order leading time according to the actual situation.

 

Certifications

Certifications

We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and more…

 

FAQ

FAQ

1. Can you make the gearbox with custom specifications?
YES. We have design and development team, also a great term of engineers, each of them have
many work years experience.

2.Do you provide the samples?
YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.

3.What is your MOQ?
Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.

4. Do you have the item in stock?
I am sorry we donot have the item in stock, All products are made with orders.

5. Do you provide technology support?
YES. Our company have design and development team, we can provide technology support if you
need.

6.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide. 

7.How to pay the money?
We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.

8. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

9. Can I come to your company to visit?
YES, you can come to our company to visit at anytime, and welcome to visit our company.

10. How do contact us ?
Please send an inquiry

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Drip-Proof
Function: Control
Casing Protection: Closed Type
Number of Poles: 4
Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China OEM Label Stripping 12V Electric Planetary DC Gear Motor   ac motor	China OEM Label Stripping 12V Electric Planetary DC Gear Motor   ac motor
editor by CX 2023-05-19

China OEM Series Pm DC Planetary Gear Motor 12V 24V 36V 48V with Planet Gear Reducer with Good quality

Product Description

Series Pm DC Planetary Gear Motor 12V 24V 36V 48V with Planet Gear Reducer

PG36M555 SERIES

voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Speed range: 3 12 ≤140 3 12 ≤220 45 12 ≤350 6 24 ≤70 3 24 ≤110 45 24 ≤180 6-99.5K    Motor please refer to the motor data RS-555123000.
          Gearbox please refer to gearbox data reduction ratio99.5 .Related to gearmotor output speed and torque please 
          refer to motor data. 
   2\ Motor can be installed wiht magnetic encorder. encorder parameters please refer to  me-37.htm .
   3\Standard output shaft after reducing: 8.0mm. other sizes of then output shaft can make as client request.
   4\Chart only for reference,products shall prevail the entity.

Company Introduction

 

Type: Circular Gear
Dia.: 36X(84~110)mm
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Transport Package: CTN Size: 32X28xh26cm 40PCS/CTN G. W. 16kgs
Specification: CE, Rohs
Customization:
Available

|

Customized Request

Motor

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China OEM Series Pm DC Planetary Gear Motor 12V 24V 36V 48V with Planet Gear Reducer   with Good qualityChina OEM Series Pm DC Planetary Gear Motor 12V 24V 36V 48V with Planet Gear Reducer   with Good quality
editor by CX 2023-04-20

China Micro 12V DC planetary gear motor for automatic lift trucks wholesaler

Solution Description

Micro 12V dc planetary equipment motor for automatic elevate trucks

Main Attributes
one.OEM&solODM 58mm Planetary gearbox additionally 60mm dc motor and 57mm brushless motor
two.Little dimensions dc equipment motor with lower speed and big torque
3.60mm equipment motor offer 30.0Nm torque and more dependable
four.Suitable to little diameter, low noise and massive torque application
5.Reduction ratio:4,thirteen,15,eighteen,forty seven,55,65,77,168,198,234,276,326
 
   

Motor design no. Rated voltage No-load speed No-load recent Rated velocity Rated torque Rated present Output power Stall torque Stall current
VDC r&solmin mA r&solmin g.cm mA W g.cm A
TRK-6097-2425 24 2500 .25 2000 1500 1.eight 30 7500 eight.
TRK-6097-2460 24 6000 .75 4500 3000 8.2 138 12000 twelve.

Equipment motor technological data : GMP60-6097-2425-xxx

Reduction ratio 4 thirteen eighteen 47 fifty five seventy seven 168 198 326
Duration mm 36 forty eight 48 59 59 59 70.2 70.two 70.two
No-load pace rpm 690 a hundred ninety 138 fifty three forty five 32 15 13 8
Rated speed rpm 555 153 a hundred and ten 42 36 26 12 ten six
Rated torque kg.cm 6 13 eighteen 40 55 sixty five one hundred twenty 145 a hundred ninety
Max.momentary tolerance torque kg.cm 30 80 80 a hundred and eighty a hundred and eighty a hundred and eighty three hundred 300 300

Equipment motor technical info : GMP60-6097-2460-xxx

Reduction ratio 4 13 18 forty seven fifty five seventy seven 168 198 326
Size mm 36 forty eight 48 59 59 59 70.two 70.two 70.two
No-load velocity rpm 1665 460 333 127 108 78 36 30 18
Rated pace rpm 1250 345 250 ninety five 80 fifty eight 26 22 14
Rated torque kg.cm eight twenty five 35 70 eighty 110 one hundred seventy 210 260
Max.momentary tolerance torque kg.cm 30 eighty eighty 200 two hundred two hundred three hundred three hundred 300

Merchandise Application

Automated doorway operators, automatic energy preserving tub,electrical controlled valve,oxygen equipment,optical products, Automat cordless electrical power device,lights,and so on.
 

Other Programs:
Organization Equipment: ATM, Copiers and Scanners, Currency Handling, Stage of Sale, Printers, Vending Equipment.
Food and Beverage: Beverage Dispensing, Hand Blenders, Blenders, Mixers, Espresso Machines, Foods Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
House Amusement and Gaming: Gaming Devices, Video clip Games, Optical Disk Drives, RC and Energy Toys.
Residence Systems: House Ventilation, Air Purifiers and Dehumidifiers, Variety Hoods, Washers and Dryers, Refrigerators, Dishwashers, Floor Treatment, Whirlpool and Spa, Showers, Intelligent Metering, Coffee Equipment.
Garden and Garden: Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Personal Treatment: Hair Slicing, Hair Treatment, Massagers.
Electrical power Equipment: Drills and Drivers, Sanders, Grinders, Polishers, Saws.
Digital camera and Optical: Online video, Cameras, Projectors.

Packing & Delivery
Packaging: one carton packing, 100 pieces for each box.
Transport time:
DHL: 3-5 functioning days &semi
UPS: 5-7 operating days&semi
TNT: 5-7 working days&semi
FedEx: 7-9 operating days&semi
EMS: twelve-fifteen operating times&semi
By Sea: Is dependent on which country

Our Firm
TT Motor &lparHK) Industrial Co., Ltd has been specializing in micro motors, gear motors and their respective components given that 2000.
Our goods are extensively employed in leisure methods, automobiles, residence and industrial appliances and equipment and a lot of other people. Our merchandise are trustworthy and prolonged-long lasting, and backed by years of expertise. We export ninety eight&percnt of our output throughout the world. 
By leveraging our difficult-gained popularity for honesty, dependability and quality, TT Motor aims to continue as a pioneer in the income overseas by seeking world-wide associates. If your business is an finish-consumer of micro-motors, a distributor or an agent, you should get in touch with us. We appear ahead to being CZPT to operate collectively with you in the around long term.

FAQ
Q: How to get&quest
A: ship us inquiry &rightarrow receive our quotation &rightarrow negotiate details &rightarrow confirm the sample &rightarrow sign contract&soldeposit &rightarrow mass manufacturing &rightarrow cargo ready &rightarrow balance&soldelivery &rightarrow further cooperation.
Q: How about Sample order&quest
A: Sample is available for you. remember to speak to us for information. Contact us
Q: Which shipping way is avaliable&quest
A: DHL, UPS, FedEx, TNT, EMS, China Post,Sea are obtainable.The other transport techniques are also accessible, remember to speak to us if you need ship by the other delivery way. 
Q: How lengthy is the supply&quest
A: Devliver time is dependent on the quantity you buy. usually it takes fifteen-25 functioning days.
Q: My package has lacking products. What can I do&quest
A: Make sure you contact our support staff and we will verify your get with the deal contents.We apologize for any inconveniences. 
Q: How to confirm the payment&quest
A: We settle for payment by T&solT, PayPal, the other payment methods also could be approved,You should speak to us prior to you shell out by the other payment approaches. Also thirty-fifty&percnt deposit is accessible, the harmony funds should be paid just before shipping and delivery.


/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Motor model no&period; Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r&sol;min mA r&sol;min g&period;cm mA W g&period;cm A
TRK-6097-2425 24 2500 0&period;25 2000 1500 1&period;8 30 7500 8&period;0
TRK-6097-2460 24 6000 0&period;75 4500 3000 8&period;2 138 12000 12&period;0

###

Reduction ratio 4 13 18 47 55 77 168 198 326
Length mm 36 48 48 59 59 59 70&period;2 70&period;2 70&period;2
No-load speed rpm 690 190 138 53 45 32 15 13 8
Rated speed rpm 555 153 110 42 36 26 12 10 6
Rated torque kg&period;cm 6 13 18 40 55 65 120 145 190
Max&period;momentary tolerance torque kg&period;cm 30 80 80 180 180 180 300 300 300

###

Reduction ratio 4 13 18 47 55 77 168 198 326
Length mm 36 48 48 59 59 59 70&period;2 70&period;2 70&period;2
No-load speed rpm 1665 460 333 127 108 78 36 30 18
Rated speed rpm 1250 345 250 95 80 58 26 22 14
Rated torque kg&period;cm 8 25 35 70 80 110 170 210 260
Max&period;momentary tolerance torque kg&period;cm 30 80 80 200 200 200 300 300 300

###

Other Applications&colon;
Business Machines&colon; ATM&comma; Copiers and Scanners&comma; Currency Handling&comma; Point of Sale&comma; Printers&comma; Vending Machines&period;
Food and Beverage&colon; Beverage Dispensing&comma; Hand Blenders&comma; Blenders&comma; Mixers&comma; Coffee Machines&comma; Food Processors&comma; Juicers&comma; Fryers&comma; Ice Makers&comma; Soy Bean Milk Makers&period;
Home Entertainment and Gaming&colon; Gaming Machines&comma; Video Games&comma; Optical Disk Drives&comma; RC and Power Toys&period;
Home Technologies&colon; Home Ventilation&comma; Air Purifiers and Dehumidifiers&comma; Range Hoods&comma; Washers and Dryers&comma; Refrigerators&comma; Dishwashers&comma; Floor Care&comma; Whirlpool and Spa&comma; Showers&comma; Smart Metering&comma; Coffee Machines&period;
Lawn and Garden&colon; Lawn Mowers&comma; Snow Blowers&comma; Trimmers&comma; Leaf Blowers&period;
Personal Care&colon; Hair Cutting&comma; Hair Care&comma; Massagers&period;
Power Tools&colon; Drills and Drivers&comma; Sanders&comma; Grinders&comma; Polishers&comma; Saws&period;
Camera and Optical&colon; Video&comma; Cameras&comma; Projectors&period;

/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Motor model no&period; Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r&sol;min mA r&sol;min g&period;cm mA W g&period;cm A
TRK-6097-2425 24 2500 0&period;25 2000 1500 1&period;8 30 7500 8&period;0
TRK-6097-2460 24 6000 0&period;75 4500 3000 8&period;2 138 12000 12&period;0

###

Reduction ratio 4 13 18 47 55 77 168 198 326
Length mm 36 48 48 59 59 59 70&period;2 70&period;2 70&period;2
No-load speed rpm 690 190 138 53 45 32 15 13 8
Rated speed rpm 555 153 110 42 36 26 12 10 6
Rated torque kg&period;cm 6 13 18 40 55 65 120 145 190
Max&period;momentary tolerance torque kg&period;cm 30 80 80 180 180 180 300 300 300

###

Reduction ratio 4 13 18 47 55 77 168 198 326
Length mm 36 48 48 59 59 59 70&period;2 70&period;2 70&period;2
No-load speed rpm 1665 460 333 127 108 78 36 30 18
Rated speed rpm 1250 345 250 95 80 58 26 22 14
Rated torque kg&period;cm 8 25 35 70 80 110 170 210 260
Max&period;momentary tolerance torque kg&period;cm 30 80 80 200 200 200 300 300 300

###

Other Applications&colon;
Business Machines&colon; ATM&comma; Copiers and Scanners&comma; Currency Handling&comma; Point of Sale&comma; Printers&comma; Vending Machines&period;
Food and Beverage&colon; Beverage Dispensing&comma; Hand Blenders&comma; Blenders&comma; Mixers&comma; Coffee Machines&comma; Food Processors&comma; Juicers&comma; Fryers&comma; Ice Makers&comma; Soy Bean Milk Makers&period;
Home Entertainment and Gaming&colon; Gaming Machines&comma; Video Games&comma; Optical Disk Drives&comma; RC and Power Toys&period;
Home Technologies&colon; Home Ventilation&comma; Air Purifiers and Dehumidifiers&comma; Range Hoods&comma; Washers and Dryers&comma; Refrigerators&comma; Dishwashers&comma; Floor Care&comma; Whirlpool and Spa&comma; Showers&comma; Smart Metering&comma; Coffee Machines&period;
Lawn and Garden&colon; Lawn Mowers&comma; Snow Blowers&comma; Trimmers&comma; Leaf Blowers&period;
Personal Care&colon; Hair Cutting&comma; Hair Care&comma; Massagers&period;
Power Tools&colon; Drills and Drivers&comma; Sanders&comma; Grinders&comma; Polishers&comma; Saws&period;
Camera and Optical&colon; Video&comma; Cameras&comma; Projectors&period;

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Micro 12V DC planetary gear motor for automatic lift trucks     wholesaler China Micro 12V DC planetary gear motor for automatic lift trucks     wholesaler
editor by CX 2023-03-31

China High Torque 16mm 6v 64rpm Planetary 12v dc gear micro stepper motor 3nm gearbox dc motor dc motor

Guarantee: Other
Design Quantity: 16mm gear motor
Usage: BOAT, Auto, Electric powered Bicycle, Fan, House Appliance, Beauty instrument, Intelligent Home
Kind: Micro Motor, Dc Equipment Motor
Torque: custom made
Building: Series Wound
Commutation: Brushless
Safeguard Characteristic: Totally Enclosed
Velocity(RPM): custom
Ongoing Current(A): custom
Effectiveness: IE four
Voltage: 6V
No-load existing: 120mA
Load Existing: 200mA
Rated Torque: 41-1,000gf.cm
Rated Torque of Equipment Box: 1,000-1,500gf.cm
Instantaneous Torque of Gear Box: 4,000-5, Bicycle Tricycle Brush Motor Reduction Motor MY1016Z3 24V350W Large Torque Motor Reduced Value 000gf.cm
Equipment Ratio: sixteen-1296
Equipment content: POM Gears
Certification: CE,ISO9001,ISO14001,ISO13485,IATF16949
Packaging Specifics: Common packing or in accordance to client’s requirement.
Port: HangZhou

provide micro gear gearbox motor drives technique custom services.
dc gear motor(dimension)Rated Voltagespeedload existing
3.4mm 1.5-5V 3.5-300rpm100mA-220mA
4mm 2.4-300rpm 340mA
6mm 3 – 12VNo Load Pace: eleven-3824 rpm
Rated Load Speed: 10-3229 rpm
No Load Existing: 40 mA
Rated Load Recent: a hundred mA
8mm 14 – 3111 rpm Gear Levels: 1 – four
10mm 3-24 V No Load Speed: 20-4318 rpm
Rated Load Speed: eighteen-3625 rpm
No-load Existing: sixty-eighty mA
12mm 7 – 254 rpm Equipment Phases: 1 – 4
16mm No-load Pace: 4-1,373 rpm
Rated Load Velocity: 3-1,a hundred twenty five rpm
No-load Existing: eighty five-110 mA
Rated Load Recent: 130-a hundred and fifty mA
20mm No-load Pace: 7-1, Authentic Delta AC Servo Travel ASDA-A2 And Servo Motor ECMA Sequence 636 rpm
Rated Load Pace: 7-1,420 rpm
No-load Current: 70-90 mA
Rated Load Current: one hundred twenty five-a hundred thirty mA
22mm No-load Velocity: 6-1,886 rpm
Rated Load Pace: 5-1,675 rpm
No-load Current: one hundred-120 mA
Rated Load Existing: 295-300 mA
24mmNo-load Velocity: 5-1,460 rpm
Rated Load Velocity: 4-1,259 rpm
No-load Existing: 70-80 mA
Rated Load Existing: 215-220 mA
28mm 5 – 1658 rpm 300mA max
Equipment Levels: 1 – 4
32mm 5 – 1348 rpm Gear Levels: 1 – four
38mm No-load Pace: 3-1,386 rpm
Rated Load Speed: 3-1,294 rpm
No-load Existing: 315-335 mA
Rated Load Existing: 1, Customized fast launch break up hex 1 2 piece shaft collar clamp 679-1,684 mA

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China High Torque 16mm 6v 64rpm Planetary 12v dc gear micro stepper motor 3nm gearbox dc motor     dc motor	China High Torque 16mm 6v 64rpm Planetary 12v dc gear micro stepper motor 3nm gearbox dc motor     dc motor
editor by czh 2023-02-19

China 42mm 12V Electric High Torque Low Rpm Slotless Brushless DC Planetary Gear Motor for Industrial Control manufacturer

Item Description

BGBL42 DC Brushless Motor 
Environmental Circumstances -20ºC~50ºC
Insulation Clase B
Safety course IP44
Sounds ≤65dB
Amount of Poles/ phases 8/3
Lifespan >5000h

Electrical Requirements
Product RATED LOAD NO LOAD   STALL
Voltage   Power Velocity Torque  Current    Speed    Current    Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG42BL01 12 17 3400 .05 two.5 5000 .three   .15  4
BG42BL02 24 18 3550 .05 one.three 5000 .14 .seventeen 4
We can also customize items in accordance to consumer needs.

 Planetary Equipment Motor Technological Information-BG

Ratio three 14  19  27 51 seventy one 100 139
NO-load speed 1200 357 250 185 ninety six 70 50 35
Rated pace(rpm) 850 242 a hundred and eighty 126 sixty five 63 34 24
Rated torque(N.m .eighteen .five .eight one 1.8 two.4 3.5 5

Set up in 1994, HangZhou BG Motor Factory is a professional manufacturer of brushless DC motors, brushed DC motors, planetary equipment motors, worm equipment motors, Common motors and AC motors. We have a plant region of 6000 sq. meters, numerous patent certificates, and we have the unbiased style and development abilities and robust technical force, with an once-a-year output of a lot more than 1 million models. Since the commencing of its establishment, BG motor has concentrated on the overall remedy of motors. We manufacture and layout motors, give specialist custom-made solutions, respond speedily to consumer wants, and actively help customers to resolve difficulties. Our motor items are exported to twenty countries, such as the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. Solar, has more than forty many years of experience in motor technological innovation, and our other engineers also have far more than fifteen several years of encounter, and 60% of our employees have a lot more than ten many years of encounter, and we can assure you that the top quality of our motors is leading notch.
The products cover AGV, underwater robots, robots, sewing equipment business, cars, health-related products, automatic doorways, lifting gear, industrial products and have a broad range of applications.
We try for CZPT in the high quality of every single solution, and we are only a little and innovative maker.
Our eyesight: Drive the entire world forward and make life much better!

Q:1.What kind of motors can you supply?

A:At current, we primarily generate brushless DC motors, brush DC motors, AC motors, Universal Motors the electrical power of the motor is less than 5000W, and the diameter of the motor is not more than 200mm

Q:2.Can you ship me a price listing?

A:For all of our motors, they are tailored based on different requirements like lifetime, sounds,voltage,and shaft and so on. The price tag also varies in accordance to yearly amount. So it is genuinely difficult for us to provide a cost record. If you can share your comprehensive demands and once-a-year quantity, we are going to see what supply we can supply.

Q:3.Can l get some samples?

A:It is dependent. If only a handful of samples for personalized use or substitution, I am afraid it’ll be tough for us to provide since all of our motors are custom made produced and no stock accessible if there are no even more requirements. If just sample testing just before the formal buy and our MOQ,value and other terms are satisfactory,we would love to supply samples.

This autumn:Can you supply OEM or ODM services?

A:Sure,OEM and ODM are each obtainable, we have the specialist R&D dept which can provide professional options for you.

Q5:Can l check out your manufacturing unit just before we location an order?

A:welcome to visit our manufacturing unit,put on each and every happy if we have the chance to know every other far more.

Q:6.What is actually the lead time for a regular purchase?

A:For orders, the standard lead time is fifteen-twenty days and this time can be shorter or lengthier based mostly on the different model,period and quantity.

US $23.99-29.99
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

BGBL42 DC Brushless Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Number of Poles/ phases 8/3
Lifespan >5000h

###

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG42BL01 12 17 3400 0.05 2.5 5000 0.3   0.15  4
BG42BL02 24 18 3550 0.05 1.3 5000 0.14 0.17 4
We can also customize products according to customer requirements.

###

 Planetary Gear Motor Technical Data-BG

Ratio 3 14  19  27 51 71 100 139
NO-load speed 1200 357 250 185 96 70 50 35
Rated speed(rpm) 850 242 180 126 65 63 34 24
Rated torque(N.m 0.18 0.5 0.8 1 1.8 2.4 3.5 5
US $23.99-29.99
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

BGBL42 DC Brushless Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Number of Poles/ phases 8/3
Lifespan >5000h

###

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG42BL01 12 17 3400 0.05 2.5 5000 0.3   0.15  4
BG42BL02 24 18 3550 0.05 1.3 5000 0.14 0.17 4
We can also customize products according to customer requirements.

###

 Planetary Gear Motor Technical Data-BG

Ratio 3 14  19  27 51 71 100 139
NO-load speed 1200 357 250 185 96 70 50 35
Rated speed(rpm) 850 242 180 126 65 63 34 24
Rated torque(N.m 0.18 0.5 0.8 1 1.8 2.4 3.5 5

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China 42mm 12V Electric High Torque Low Rpm Slotless Brushless DC Planetary Gear Motor for Industrial Control     manufacturer China 42mm 12V Electric High Torque Low Rpm Slotless Brushless DC Planetary Gear Motor for Industrial Control     manufacturer
editor by czh 2023-01-25

China Micro 16mm 12V High Speed Single Phase DC Gear Motor with Planetary Gear Box brushless motor

Product Description

I. CH movement source China DC Planetary Equipment Motor

Feature:

I. CH planetary gearbox makes use of substantial precision chopping gears that the most critical parts of the planetary gearbox, Our micro DC Planetary Gear Motor are characterized by large precision, higher reduction equipment ratio, low sounds, prolonged support lifestyle, big bearing capacity and excellent interruption resistance and good quality can exchange imports with high-conclude models in Europe, The usa, Japan item.

Application:

DC Planetary Gear Motor commonly applied in place of work automation, intelligence household furniture, creation automation, health care tools, fiscal equipment and recreation equipment sectors, this sort of as computerized window opener, glass curtain wall, vehicle curtain, lender ATM, automated income sign up, note vending device, phase limelight, and other computerized units.

Drawing:

 

                                                                                                        GEARBOX MOTOR SPECIFICATION
Variety Ratio one: four one: five one: fifteen one: 23 one: 36 1: 57 1: sixty nine 1: one hundred one: 129 1: 167 one: 222 one: 267 1: 320 1: 385 one: 415 one: 536 1: 834 1: 1296
D163 Rated torque kg. cm .02 .02 .06 .11 .sixteen .24 .32 .42 .six .seven .83 1 one.two 1.455 1.fifty six two.02 2.8 three
Rated velocity rpm 1532 1226 409 267 one hundred seventy 108 89 sixty one forty eight 37 28 23 19 16 15 11 7 5
Gearbox Instantaneous torque Kg. cm 1.5 2 3 3.seventy five 4.five
Allowable torque Kg. cm 1 1.five 2 2.5 3
Length mm 14 17.9 21.8 25.seven 29.6
Backlash O 0.7 0.8 1 1 1.five
Fat g 18 23 28 31 36

 

                                                                                                                MOTOR Knowledge
Frames volt (V) No-load velocity (rpm) No road present (mA) Rated torsion (g. cm) Raterd velocity (rpm) Raterd current (mA) Output energy (w) Bodyweight (g)
1B7K5-12 7500 20 nine 6130 89 .568 22
Note: Merchandise voltage, output shaft measurement, electrical efficiency, you can request customized-manufactured!

About Us:

We specialized in exploring, creating, and servicing electric powered motors, gearbox, and higher precision gears with the tiny modules.

Soon after a long time of improvement, we have an independent product layout and the R&D group, services team, and specialist quality manage group.

What’s far more, we have 2 joint ventures. One particular is found in HangZhou, which makes hybrid stepper motor, valuable linear stepper motor, brushless DC motor, servo motor, stepper motor driver, brushless motor driver, encoder and brake.

An additional 1 is situated in HangZhou, which creates DC equipment motor. The factory has dozens of CNC machines and large precision examination equipment, implements the process management and computerized procedure in most
creating method.

We also have 2 cooperation factories. One is generating AC reversible synchronous motor and AC servo motor, the other 1 is making linear everlasting stepper motor, everlasting stepper motors.

Certification:

Perform Flow:

Customer’s Go to:

Package deal:

US $3
/ Piece
|
1 Piece

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Power Tools
Operating Speed: High Speed
Function: Control, Driving
Casing Protection: Protection Type
Brand: I.CH
Size: 16mm

###

Customization:

###

                                                                                                        GEARBOX MOTOR SPECIFICATION
Type Ratio 1: 4 1: 5 1: 15 1: 23 1: 36 1: 57 1: 69 1: 100 1: 129 1: 167 1: 222 1: 267 1: 320 1: 385 1: 415 1: 536 1: 834 1: 1296
D163 Rated torque kg. cm 0.02 0.02 0.06 0.11 0.16 0.24 0.32 0.42 0.6 0.7 0.83 1 1.2 1.455 1.56 2.02 2.8 3
Rated speed rpm 1532 1226 409 267 170 108 89 61 48 37 28 23 19 16 15 11 7 5
Gearbox Instantaneous torque Kg. cm 1.5 2 3 3.75 4.5
Allowable torque Kg. cm 1 1.5 2 2.5 3
Length mm 14 17.9 21.8 25.7 29.6
Backlash O 0.7 0.8 1 1 1.5
Weight g 18 23 28 31 36

###

                                                                                                                MOTOR DATA
Frames volt (V) No-load speed (rpm) No road current (mA) Rated torsion (g. cm) Raterd speed (rpm) Raterd current (mA) Output power (w) Weight (g)
1B7K5-12 7500 20 9 6130 89 0.568 22
Note: Product voltage, output shaft size, electrical performance, you can request custom-made!
US $3
/ Piece
|
1 Piece

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Power Tools
Operating Speed: High Speed
Function: Control, Driving
Casing Protection: Protection Type
Brand: I.CH
Size: 16mm

###

Customization:

###

                                                                                                        GEARBOX MOTOR SPECIFICATION
Type Ratio 1: 4 1: 5 1: 15 1: 23 1: 36 1: 57 1: 69 1: 100 1: 129 1: 167 1: 222 1: 267 1: 320 1: 385 1: 415 1: 536 1: 834 1: 1296
D163 Rated torque kg. cm 0.02 0.02 0.06 0.11 0.16 0.24 0.32 0.42 0.6 0.7 0.83 1 1.2 1.455 1.56 2.02 2.8 3
Rated speed rpm 1532 1226 409 267 170 108 89 61 48 37 28 23 19 16 15 11 7 5
Gearbox Instantaneous torque Kg. cm 1.5 2 3 3.75 4.5
Allowable torque Kg. cm 1 1.5 2 2.5 3
Length mm 14 17.9 21.8 25.7 29.6
Backlash O 0.7 0.8 1 1 1.5
Weight g 18 23 28 31 36

###

                                                                                                                MOTOR DATA
Frames volt (V) No-load speed (rpm) No road current (mA) Rated torsion (g. cm) Raterd speed (rpm) Raterd current (mA) Output power (w) Weight (g)
1B7K5-12 7500 20 9 6130 89 0.568 22
Note: Product voltage, output shaft size, electrical performance, you can request custom-made!

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China Micro 16mm 12V High Speed Single Phase DC Gear Motor with Planetary Gear Box     brushless motor	China Micro 16mm 12V High Speed Single Phase DC Gear Motor with Planetary Gear Box     brushless motor
editor by czh 2022-12-12

China Elektromotor, DC Planetary Gear Box, 12V 1.2W 1.8W Electromotor, Induction Engine Electric Motor motor armature

Product Description

Elektromotor, DC Planetary Gear Box, 24V 2.8W 8W Electromotor, Induction Engine Electric Motor

Features:
1) Dimensions: 36*36mm
2) Power: 1.2W 1.8W
3) Voltage: 12V 
4) Rated speed: 2400rpm, 4300rpm
5) Reduction ratio: 3.7~ 720K

Product photo:

Specification for DC gear motor:

Motor type Brush type / Brushless type / Stepper type
Frame size 16mm ~ 130mm… can be customized
Running speed Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power 3W ~2200W… can be customized
Output shaft round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type 12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories Internal driver / External driver / Connector / Brake / Encoder…
 
Gearbox type Parallel shaft
Right angle hollow worm shaft Right angle bevel hollow shaft Flat type hollow shaft
Right angle solid worm shaft Right angle bevel solid shaft Flat type solid shaft
Planetary center shaft

FAQ

Q: Can you make the gear motor with customization?
A: Yes, we can customize per your request, like power, voltage, speed, shaft size, wires, connectors, IP grade, etc.

Q: Do you provide samples?
A: Yes. Sample is available for testing.

Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.

Q: What’s your lead time?
A: Standard product need 5-30days, a bit longer for customized products.

Q: Do you provide technology support?
A: Yes. Our company have design and development team, we can provide technology support if you
need.

Q: How to ship to us?
A: It is available by air, or by sea, or by train.

Q: How to pay the money?
A: T/T and L/C is preferred, with different currency, including USD, EUR, RMB, etc.

Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.
 

US $5-25
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Application: Universal, Industrial, Household Appliances, Power Tools, Lawn Mower
Operating Speed: Constant Speed
Excitation Mode: Excited

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Motor type Brush type / Brushless type / Stepper type
Frame size 16mm ~ 130mm… can be customized
Running speed Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power 3W ~2200W… can be customized
Output shaft round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type 12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories Internal driver / External driver / Connector / Brake / Encoder…
 
Gearbox type Parallel shaft
Right angle hollow worm shaft Right angle bevel hollow shaft Flat type hollow shaft
Right angle solid worm shaft Right angle bevel solid shaft Flat type solid shaft
Planetary center shaft
US $5-25
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Application: Universal, Industrial, Household Appliances, Power Tools, Lawn Mower
Operating Speed: Constant Speed
Excitation Mode: Excited

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Motor type Brush type / Brushless type / Stepper type
Frame size 16mm ~ 130mm… can be customized
Running speed Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power 3W ~2200W… can be customized
Output shaft round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type 12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories Internal driver / External driver / Connector / Brake / Encoder…
 
Gearbox type Parallel shaft
Right angle hollow worm shaft Right angle bevel hollow shaft Flat type hollow shaft
Right angle solid worm shaft Right angle bevel solid shaft Flat type solid shaft
Planetary center shaft

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Elektromotor, DC Planetary Gear Box, 12V 1.2W 1.8W Electromotor, Induction Engine Electric Motor     motor armatureChina Elektromotor, DC Planetary Gear Box, 12V 1.2W 1.8W Electromotor, Induction Engine Electric Motor     motor armature
editor by czh 2022-12-12

China 22mm High Toruqe 12V DC Planetary Gear Micro Motor for Smart Door Lock manufacturer

Product Description

Note:

22mm High Toruqe 12V DC Planetary Gear Micro Motor for Smart Door Lock

Main advantages:

1. Motor specs such as voltage, speed, torque,  the shaft, packing can be customized.
2. As a gear reduction motor, it is very suitable for application that requires low rpm and high torque

3. High sealing: the output part is equipped with an oil seal and O-ring, which can prevent the lubrication grease backflow in the gearbox, and avoid the aging or damage of oil seal insulation.

4. High efficiency: using a new pressed silicon steel sheet, high precision core, strong magnetic permeability. The profile uses the new heat dissipation structure.

5. Applicability: Compact size, suitable for various operating environments.
 

Planetary gearbox advantages:

1) Low speed: 12 – 1650 rpm.

2) High torque: 0.05 kg.cm to 5 kg.cm.

3) Small vibration, low noise, low energy consumption.

Application:

DC miniature Planetary Gear Motor widely applied in office automation, intelligence furniture, production automation, medical equipment, financial machinery and game machine sectors, such as automatic window opener, glass curtain wall, auto curtain, bank ATM, automatic cash register, note vending machine, stage limelight, and other automatic devices.

Parameter:

 

  Reduction ratio 1/5 1/18 1/20 1/25 1/66 1/77 1/90 1/110 1/136 1/246 1/336 1/393 1/484 1/597 1/735 1/1079 1/1475 1/2124 1/3968
12V Rated torque(g.cm) 170 560 650 820 1800 2100 2450 3000 3700 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1500 400 340 280 105 94 80 65 53 29 22 19 15.5 12.5 10 7.1 5.3 3.8 2.0
24V Rated torque(g.cm) 190 640 750 930 2000 2400 2800 3500 4000 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1600 420 350 290 110 98 84 68 55 31 23 20 16 13 10.5 7.4 5.5 3.9 2.0
  Rotation direction CW
  Length(L-mm) 23.3 29.5 35.7 41.9 48.1

 

Rated volt(V) Rated torque(g.cm) Rated speed(rpm) Rated current(mA) No-load speed(rpm) No load current(mA) Weight(g)
12 46 7230 <=500 9000 <=120 43
24 53 7550 <=300 9000 <=80 43

About Us:

I.CH was founded in 2006, located in HangZhou. We specialized in researching, developing, and servicing electric motors, gearbox, and high precision gears with the small module. After years of development, we have an independent product design and R&D team, service team, and a professional quality control team. To realize our service concept better, provide high-quality products and excellent service, we have been committed to the core ability and training. We have a holding factory in HangZhou, which produces high precision small mold gears, gear shaft, gearbox, and planetary gearbox assembling.

Our Product:
DC Gear Motor | DC Planetary Gear Motor
Planetary Gearbox | Spur Gearbox
Spur Gear | Helical Gear

Our Certificate:
As we all know, the success of the company is based on the quality of the motor. So, to get the acknowledgment in the market, we get ROHS, CE, ISO900 certificates.

Work-flow:

Service:

ODM & OEM
Gearbox design and development

Package&Ship:

Carton, pallet, or what you want
The delivery time is about 30-45 days.

Customer’s Visiting:

FAQ:

1. Can you custom gearbox?
YES.

2. DO you provide the sample?
YES.

3. Do you provide technical support?
YES

4. Do you have a factory?
Yes, we are a professional manufacturer.

5. Can I come to your company to visit?
YES

US $3
/ Piece
|
1 Piece

(Min. Order)

###

Operating Speed: Low Speed
Casing Protection: Protection Type
Rated Voltage: 12V, 24V
Gearbox Diameter: 22mm
Gearbox Type: Planetary Gearbox
Ratio: 1:5-1:3968

###

Customization:

###

  Reduction ratio 1/5 1/18 1/20 1/25 1/66 1/77 1/90 1/110 1/136 1/246 1/336 1/393 1/484 1/597 1/735 1/1079 1/1475 1/2124 1/3968
12V Rated torque(g.cm) 170 560 650 820 1800 2100 2450 3000 3700 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1500 400 340 280 105 94 80 65 53 29 22 19 15.5 12.5 10 7.1 5.3 3.8 2.0
24V Rated torque(g.cm) 190 640 750 930 2000 2400 2800 3500 4000 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1600 420 350 290 110 98 84 68 55 31 23 20 16 13 10.5 7.4 5.5 3.9 2.0
  Rotation direction CW
  Length(L-mm) 23.3 29.5 35.7 41.9 48.1

###

Rated volt(V) Rated torque(g.cm) Rated speed(rpm) Rated current(mA) No-load speed(rpm) No load current(mA) Weight(g)
12 46 7230 <=500 9000 <=120 43
24 53 7550 <=300 9000 <=80 43
US $3
/ Piece
|
1 Piece

(Min. Order)

###

Operating Speed: Low Speed
Casing Protection: Protection Type
Rated Voltage: 12V, 24V
Gearbox Diameter: 22mm
Gearbox Type: Planetary Gearbox
Ratio: 1:5-1:3968

###

Customization:

###

  Reduction ratio 1/5 1/18 1/20 1/25 1/66 1/77 1/90 1/110 1/136 1/246 1/336 1/393 1/484 1/597 1/735 1/1079 1/1475 1/2124 1/3968
12V Rated torque(g.cm) 170 560 650 820 1800 2100 2450 3000 3700 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1500 400 340 280 105 94 80 65 53 29 22 19 15.5 12.5 10 7.1 5.3 3.8 2.0
24V Rated torque(g.cm) 190 640 750 930 2000 2400 2800 3500 4000 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1600 420 350 290 110 98 84 68 55 31 23 20 16 13 10.5 7.4 5.5 3.9 2.0
  Rotation direction CW
  Length(L-mm) 23.3 29.5 35.7 41.9 48.1

###

Rated volt(V) Rated torque(g.cm) Rated speed(rpm) Rated current(mA) No-load speed(rpm) No load current(mA) Weight(g)
12 46 7230 <=500 9000 <=120 43
24 53 7550 <=300 9000 <=80 43

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China 22mm High Toruqe 12V DC Planetary Gear Micro Motor for Smart Door Lock     manufacturer China 22mm High Toruqe 12V DC Planetary Gear Micro Motor for Smart Door Lock     manufacturer
editor by czh 2022-12-07