Product Description
780-lock bottom-double aspect-straight line
Folding Gluing CZPT
Traits:
1.Driving by synchronous belt,ensure clean and accurate managing.
2.Inverter driving,secure and CZPT preserving.
three.Use electric modify,straightforward run.
4.Automated steady feeding,use a number of belt with vibrating motor to hold the feeding stable.
5.Automatic counting and kicking,quantity can preset.
six.Conveyer pressure adjustable according to the box to make certain best good quality.
two. Principal technical parameter:
| Design | ZH-780-Laptop |
| Appropriate substance | Card board 210-800gsm/E flute |
| Max approach | Automatic ongoing feeding |
| Max mechanical velocity | 350m/min |
| Total dimension | 14000*1500*1400mm |
| Fat | 5.5T |
| Electrical power intake | 11.8KW, 380V, 50HZ |
| Compressed air | 6 bar,10 m³/h,sixty L |
Device configuration
| Primary motor | Siemens |
| Touch display screen | Siemens |
| PLC | Siemens |
| Inverter | Siemens |
| Generate CZPT | NSK |
| Wall thickness | Double aspect 20mm tempered |
| Feeding belt | NITTA |
| Basic belt | NITTA Japan |
| Circuit Breaker | Schneider |
| Rely | Schneider |
| Button | Schneider |
| Change CZPT offer | Schneider |
| Picture Switch | Panasonic |
Attribute:
one.Feeder Segment
With independent transmission,lower noise,with CZPT adjustable wheels,max doing work capability can be achieved.
Feeding knives and left and right registers correcting bar are controlled up and down by pneumatic system effortlessly.
Feeding knifes are equipped with pneumatic system for smoother feeding.
Configure the exhibit, real-time monitoring of the paper is normal.
two.Paper Alignment System:
Computerized alignment program to appropriate the paper feeding,avoiding the paper likely to sides.
Configure the transmission to change the belt pace,Make the box much more neat.
three.Pre-fold Section:
The pre-fold segment has the gain to make the box more simple and easy to open up,even in some case the scoring is not very properly.
• Still left hand glue flap pre-folder up to 180º.
• third crease pre-folding set up to 135º.
• 1st and 3rd crease openers.
Configuration reducer, different boxes when the conversion, the reducer with electric regulation
4.Base Lock Segment
Big-quantity layout,when the machine is managing at high speed,the glue will not go out or leaking .Optional
bottle is very good for CZPT time operation.
Lock-base assembly mechanism with high elastic hookers is of deal layout,rapidly and easy operation.
Configuration reducer, different containers when the conversion, the reducer with electric regulation
five.Down gluing segment
Two side gluing tank.(appropriate and left)
Simple to get rid of and thoroughly clean
six.Folding Section
Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
Quick,convenient adjustment and operation can fold boxes perfectly
The middle up and down transmission module can fold boxes synchronously or alternately
Configuration reducer, various bins when the conversion, the reducer with electric powered regulation.
7.Trombone Section
• Steady and computerized box assortment mechanism that assures a neat transfer to the Press segment, guaranteeing a wellaligned stream.
Configure the CZPT contact monitor computer velocity can be modified
8.Push area
• Handbook and automated pace variation in coordination with a photocell.
Gluing technique
one. Principal specialized parameter:
Design HZ4
| Input voltage | AC220V (±20%)fifty-60HZ | |
| Power | 480W | |
| Glue-like precision | ±1mm | |
| Gel-stage | 4 types | |
| Product | HB6 | |
| Guns | three | |
| To adhesives max viscosity | 3000mPas | |
| Every two-way transport performance | 6:one | |
| Fuel resource enter requirements | 2-8bar | |
| Bodyweight | 25kg | |
| Dimension | 1280*480*600mm |
Plasma Floor Treatment method
Major complex parameter:
| Model | Clear-PL-5571 | |
| Enter voltage | AC220V | |
| Nominal CZPT | 1500AV | |
| Plasma CZPT offer frequency | twenty-30khz | |
| Air supply stress | 60L/m³ | |
| Dimension | 720*970*1270 | |
| Outlet angle | <20mm | |
| two guns | ||
| Fat | 95kg |
These NEMA c-plane reducers are equipment energy, servicing-free of charge, and can be put in in any orientation with a slip match “O” ring design. Offered in minimal to higher reduction ratios, flange mount or foundation mount styles, correct angle or hollow shaft proper angle variations. Set up NEMA C-Encounter AC motors, brushless DC motors, and brushed DC motors. For 1/2 HP to 3 HP Motors NEMA 56C, 140TC, and 180TC Input Flange Inline Helical Equipment Reducers Correct Angle Hypoid Equipment Reducers